Skyrim SE: COMPLETE Modding Guide - True Directional Movement, SkySA, TUDM, Elder Souls, and MORE!

[@rojibeans5816]

Just a minor note - True directional movement has a new requirement called MCM helper. Without it, True directional movement's MCM menu will not appear, and thus you can't assign the lock on(Along with the rest of the options which are technically fine to leave as default)

[@Wired1upGaming]

Thank you for sharing. Going to pin this for others. I just got to look into this and yes MCM Helper is now a requirement for 1.4.0+ The only reason MCM Helper was added was for saving globally so you don’t have to go through the settings every new game.

[@pacovides5364]

God bless you

[@unknownunknown671]

Even with MCL helper it do not shows in my MCM menu, what I'm doing wrong?

[@unknownunknown671]

Anyone? please?

[@pacovides5364]

​@@unknownunknown671 If you alredy have did that reinstall everything again, even skyrim and the patcher, and itall nemesis like in the video

[@Mern]

great guide my dude! useful for me to link this to ppl if they need some help when starting out 👍

[@Wired1upGaming]

Thanks bro!

[@sierra117420]

Great to see content creators support each other's work. Keep it coming you two! I finally got skysa to work too so thanks to you both

[@tiellimilin6622]

Can't thank you enough, I'm new to modding and the Zedit "things" for tudm was the highest wall for me. This clears things up

[@mordecai1484]

That's a VERY useful tutorial. I wish there were more of them for different aspects of the game. Thank you.

[@Wired1upGaming]

I’m glad you liked the video! Don’t worry I will be making more videos soon.

[@mordecai1484]

@@Wired1upGaming thanks. I have a very limited amount of time for such staff and I was hooked on these new combat systems that skyrim now has and wanted to try. I'm installing them right now. ) There's some overwrite files at the bottom of the list, after installing vanargand animations. Can you tell what I should do to them?

[@Wired1upGaming]

Sometimes MO2 generates config files for mods when you launch the game. Usually I will “create mod from file” and name it something like “MO2 Dump” or something and keep it at the bottom of your load order.

[@nekokaru2165]

Hey. I just wanna thank you for holding my hand on my first skyrim modding experience. Your vid gave me first hand experience on modding. Thanks a lot!

[@芸術-i2z]

literally the only skysa installation guide that actually worked, god bless

[@neonsolace2748]

man i just wanna hug you for this

[@cammills9204]

This is by far the best tutorial, you’ve got my thanks!

[@Wired1upGaming]

Thanks friend, there’s more to come 😁

[@samuelvistan9457]

thank you very very much dude, you really helped me I was messing arround with nemesis for a long time and finally someone explained me the whole proces once more thank you

[@Joi4Madonna3mpress]

Thank you oh so much for this. I'm approaching modding and I needed someone to hold my hand and explain the process as clearly as possible. I applaude u sir! thank u

[@Wired1upGaming]

Your very welcome and good luck modding 😁

[@omnibleidd]

Thank you good sir! I was able to have TUDM without having to worry about that zedit thing.

[@Bulazs250]

Just a note: The Nemesis link you used initially (topmost) is for old Skyrim. You said the "previous" version worked for you, well of course it did, because that is for Skyrim Special Edition, it's in the name of the link and description too! Thank you for the guide!

[@allpackagaming9811]

I did find this useful thank you! Even though I'm playing legendary edition I could still use this video to help since the collection is on le too. Now I can finally play a requiem Norse dark souls Skyrim.

[@Wired1upGaming]

I’m glad it was helpful for you. Yes the only difference between SSE and LE are the mods. The methods for installing them are basically the same.

[@allpackagaming9811]

@@Wired1upGaming yep. i do wish i could play sse but my 4 gb laptop would probably blow up.

[@Wired1upGaming]

4gb is enough just stay away from 4k textures

[@allpackagaming9811]

@@Wired1upGaming oh shit really?. Thank you for this info dude.

[@sonicboom6545]

Finally, the animation works, you saved my day. Thank you very much

[@giotto_4503]

To those who are getting errors generating Nemesis, try disabling your W10's Real-Time Protection before generating it. It worked for me.

[@Wired1upGaming]

Good tip! Thank you for sharing hopefully this helps others. I use Windows 7 so I could never replicate these warnings.

[@Gilaric]

Thank you this fixed Nemesis for me! But like OMG Windows 10 PLEASE LET ME MOD MY GAME!

[@nicholasrogers7788]

Holy Cow I was So frustrated Nemesis wasn't working right I followed every instruction to the T. Who knew turning off real time protection was the solution all along. THANK YOU!!

[@Michael-5322]

This is the best guide for nemesis. Thank you so much !!!!

[@GQBlI]

First I'm sorry I don't speak English very well, and secondly thank you very much sir you helped me a lot, I have been trying since 4 days after I gave up I saw your video by chance and clicked on it and it was the best thing that happened to me this week I really want to play a game skyrim with new and better animation than orignal skyrim and thanks to you this day has become the best day thank you very much and wish you a happy life sir ,❤️

[@Wired1upGaming]

Your very welcome 🙏🏼

[@StephonsDoom]

Amazing guide bro. This helped me so much putting all of this together.

[@thegearmeister9302]

Hey man, I loved the video and it really helped me a lot. I saw that you replied to someone that there will be more to come, which is awesome! I was wondering if you could do an installation guide for underdog animations. It looks SO good and there aren't any videos out on how to do it. I know there's a lot of us having trouble with it so it would be a huge help. Great video! Keep it up!

[@Wired1upGaming]

Thank you 😁 I will see what I can do 👍🏼

[@mayurbharadwajhazarikaoffi3526]

Thank you so much for this... You are my savior!!!

[@BeowuIfs]

I remember struggling to have Nemesis work FOREVER. Literally, I redid like 4 to 5 load orders (most having 300 mods) with each having taken 12 - 24 hours to do. Every time the animations were ALWAYS fucked with errors somehow even after watching videos on it which led to me always leaving them a dislike and pissed. I found yours about a month ago and now I never have issues with Nemesis and it's mods anymore. You're the guy 👍

[@Wired1upGaming]

Thanks for your kind words, I am glad this helped you.

[@HauntedAbysss]

Holy f****** s*** I thought this would take a lot longer to figure out. Thank you so much!!!!! Seriously! I really love your video style. Straight to the point and easy to follow. Is it the same for the other animation mod styles using nemesis?. Can you make a video series about LOD and using your ,Zedit, patching.!

[@Wired1upGaming]

Thanks bud, I do have other modding guides coming soon they will be smaller and more specific. And yes I am also going to do some more animation tutorials.

[@RikardElkson]

Worked perfectly, thanks!

[@PhilippeArroyo]

You my friend, have earned a sub.

[@Wired1upGaming]

Thank you, I’m working on some more stuff I hope you like it.

[@samone1382]

thank you so much for that,its very very helpful indeed and will make the game playing even more fun many thanks

[@PedroSantos-um4dn]

Thank you for the amazing video, helped me a lot

[@Dark-Ainz]

Thanks !!!! This video helps a lot, 19.02.2022

[@pillarman-3127]

After running the Nemesis please checking that all the male npc in game can do normal attack or not. Its the Nemesis bug that happen to me from time to time.Thanks any way for mod installing guide. its very clear and I like your voice. 👍

[@Wired1upGaming]

Great advice! I have never heard of this before so thank you for sharing, going to pin this in case someone has the issue.

[@JamesNalacar]

@@Wired1upGaming Hey man you forgot to pin that Comment

[@Wired1upGaming]

I had it pinned, but I can only pin one comment. I want people to understand that there is a new requirement for TDM that’s why I pinned the other one instead. Trust me I wish I pin them both :(

[@bolas9860]

yeah for some reason enemies in my game can't actually attack in melee, do you know how to fix that?

[@ReggaeRomi]

For the nemesis bug, I fixed it by disabling windows security

[@MooneShadow]

Hmmmm I thought the same of the walking and running animations... thank God I watched this video just to pass time...

[@Captain_Obvious_Says]

Just another minor note, Dynamic Animation Replacer is no longer needed if you are using Open Animation Replacer (OAR).

[@WolfyWetFurr]

This helped greatly. Thanks! 💜

[@DumbPeachy]

hey man thank you for the guide helped out alot! I even switched from vortex to MO2, you have shown me the true way to mod lol!

[@MayruneGaming]

Thank you so much!

[@louperranth.c.1759]

thank you a lot for this video dude (a lot of videos doesnt explain how to instal and is easy to break the game if you dont know the order )

[@johnathanray4563]

thank you new to modding but was informative video

[@marthdovahclips]

This is a good mod, though there may be a reason to run the Nemesis engine before applying all the non-nemesis mods. I'm not sure if this happened to anyone else, but checking all the ones that use SkySA and not nemesis directly, could result in a patch with a glitched running/sprinting animation where it would lag every step. Somehow, unchecking all the Non-Nemesis animation mods and then running the engine before reapplying the rest of the mods worked and there's no lag anymore.

[@blade8424]

Do you have a tutorial for Vortex? Or is MO2 requirement only? 2024 comment. Hope your doing well. :3

[@Wired1upGaming]

Hi, Yes I’m still around (I never left lol). The process hasn’t changed although the requirements may have. Regarding Vortex: I don’t use it. Vortex is just not as powerful as MO2. And with MO2 you can have addons (which is a video I plan on making). If you have the time and energy I would suggest making the switch. To answer you question, no, MO2 is not a requirement, but it is the preferred method.

[@blade8424]

@@Wired1upGaming Thanks! Just used someone elses tutorial to get the right mods for beginner easy friendly wise. lol. It was tedious and took me a few days to learn everything but I think I'm getting the hang of it. XD all I want is the targeting mod for True Directional movement is all and custom animation mods. lol. :) And mage custom animation casting mods too. :) Would be fun. :) ^_^ Hope someone can do tutorials like these for Fallout 4 and the VR versions. Would be nice. ^_^ Mostly want AI and Immersion mods, etc. Better combat, etc. And NPCs, :D And trust me I did A TON of reading on those mods. lol . :) Its helpful. :3 ALWAYS read the description. lol. :3 For better gameplay! :D And tweaks, etc. ^_^

[@slordar]

Friendly Reminder Alternate Perspective needs a TUDM patch for TUDM to run properly

[@stormdriftwood3574]

Perfect, Thank You Bro!!!

[@jessem4174]

I have all the mods required installed, but the default skysa animations play, not the elder souls ones. Elder souls is below SkySA in the list, but I just can't figure out why default skysa animations are playing

[@brandonclem7725]

Frustrated, I have everything working besides when I go to the true directional movement page, the options menu that should show up is black >:(

[@Lycku]

same here. if you find out how to fix please lmk

[@quentins8165]

Same boat

[@ici36]

Thank you for this!

[@cyphxen9838]

Great Tutorial! Thanks! Subbed!

[@spinez-k3s]

Excellent guide

[@thomaspvh]

Nemesis is failing to produce patches for True Directional Movement: 360 Horse Archery, Procedural Leaning, Headtracking. Nemesis seems to think it is creating the patches yet nothing appears in the Overwrite folder with a BASE_DIR file path. Nothing seems to get created. Nemesis did however work for the SkySA patch. Update: Creating a mod out of solely the Nemesis Update is required first. Exactly as Wired1upGaming did in this video.

[@actuallylore]

Mine just keeps crashing when i put key on target lock, and im using vortex.....please...help

[@wearevenom82]

I'm having trouble with the target lock on sistem it's not working

[@buxA57]

i installed it and nothing happends (directional mod). I see it in mod configuration but when i click at it its empty edit: im playing on special edition

[@k435c194]

I'm having the same issue and can't seem to find a fix. I was hoping this video would help but it has not sadly.

[@buxA57]

@@k435c194 hello you need match yours skyrim version to mod, there is pre-Anniversary version and Anniversary version (if you dont have update you are anniversary)

[@k435c194]

@@buxA57 If I don't have which update?

[@sIate_etaIs]

thanks bro huge help from you 👍

[@jankfoots]

After all this it still won’t work for me. I’m just gonna give up

[@Carter_2Raw]

Great video! I was wondering if your LO you linked, if its organized like that in MO2? I was gonna try and you it as a reference to organize my MO2. I started modding Skyrim this week ha and I'm learning as I go hopefully I'll get better at it one day lol

[@Wired1upGaming]

Hi, yes it’s in the correct order as in MO2. I getting things ready to start making videos again and I must warn you, my load order has changed ALOT from this video. Once I upload the next video the load order you have the link to will change fyi.

[@Carter_2Raw]

@@Wired1upGaming Oh ok thank you for replying

[@Pieces_Dawnguard]

Thanks for the vid.

[@bigbutterbuns360]

At the 8:00 minute time stamp, in the step after Running Nemesis where you initially check the TDM, SKYSA, and Ultimate dodge boxes within Nemesis, my Overwite folder is NOT generating any additional folders, where as in the video I see yours is now showing 'Meshes' and 'scripts.' Should I proceed past this point if my Overwrite folder has not generated these new folders?

[@Wired1upGaming]

No you will T pose in game without the generated files from Nemesis.

[@robertmu]

10:46 is there any way to do this with Vortex?

[@Wired1upGaming]

Idk I don’t use vortex. However I think you could navigate to these files and rename then or move them to a backup folder you create inside the mod.

[@robertmu]

@@Wired1upGaming thanks for the reply, I will try

[@SapiaNt0mata]

when i update engine of Nemesis and i make a new mod from overwrite in MO2, the mod that is created is greyed out. i tried with closed real-time protection of antivirus and windows 7 compatibility but it's still greyed out.

[@Wired1upGaming]

Sounds like the output is going somewhere else. If it’s greyed out it’s an empty mod. I would verify the output path for your overwrite folder in MO2 settings.

[@SapiaNt0mata]

i managed to make it work. when i highlighted the greyed mod that was created from overwrite it said that it's not valid cause it doesn't have texture, meshes, etc. i found a dummy textures folder and put it inside and it got white. i run Nemesis, ticked True Directional Movement and it patched it without errors and the overwrite to create the Nemesis Patch worked without adding the dummy textures folder. apparently the overwrite for Nemesis update engine is whacky for me.

[@Wired1upGaming]

Strange, but I’m glad you got it to work

[@SapiaNt0mata]

apparently others also have the same issue cause if you download Mysticism Spells for NPCs(gives Mysticism spells to NPCs with SPID) it has a dummy textures folder cause without it the mod cannot be used cause it's greyed out.

[@blatherskite7729]

Awesome video, everything seems to work perfectly except for true directional movement. I see it in the mcm and cam even tweak it. But there seems to be no animations cant lock on as well. Any ideas?

[@Wired1upGaming]

I would say make sure you use SSE 1.5.97 and use the version of TDM that I used in this video.

[@anthonylorenzana9910]

Is there anyone that can help me with installation process for the the mod thats off site for vortex ? I am having trouble figuring out where to put the extracted folders.

[@macale9966]

why does it say Initializing engine update ERROR(2006): Missing behavior file. The behavior file name must be in this format ("Nemesis_.xml") and it must located in the same path as the hkx counterpart. Please contact the mod author File: falmerbehavior Failed to update engine

[@Wired1upGaming]

Not sure but it sounds like the mod author needs to update their mod.

[@DokkanLegendsKun]

In my case there is no overwrite file formed.. and there is no skysa on nemisis application

[@Wired1upGaming]

Be sure you run Nemesis through MO2

[@DokkanLegendsKun]

@@Wired1upGaming yeah got it thanks 🙏

[@JR13Real]

I cant seem to drag my nemesis folder in my MO are there any workarounds?

[@unknownunknown671]

where is that nemesis overwrite if you use vortex? thanks in advance!!!!!!

[@Wired1upGaming]

I don’t think vortex uses a virtual file system.

[@unknownunknown671]

@@Wired1upGaming I see, I have about 6 hours trying to get the true directional mod to work but nothing...

[@CiottoGame]

I follow this tutorial step by step, but when I run the game from SKSE, a message box appear to me: "A DLL plugin has failed to load correctly. If a new version of Skyrim was just released, it probably needs to be updated. MCM Helper.dll: disabled, address library needs to be updated" What does mean? I have to wait that the author will updater the mcm version? meanwhile I can't use True Directional Movement?

[@Lycku]

If you find out I would also like to know

[@CiottoGame]

@@Lycku I resolve this using an old version of MCM Helper.. but now I can't see menu of TDM.. Idk why

[@quentins8165]

I had this problem as well, as far as I remember what I did was download the Anniversary Edition of SKSE Address Library instead of the one for Special Edition check the Nexus page and see which version you have installed.

[@quentins8165]

@@CiottoGame Same goes for me, it loads in the game fine, but the mod itself is inactive and I can't view it in the MCM if you've found a fix let me know please :)

[@CiottoGame]

@@quentins8165 sure! I downgrade the .exe to 1.5.97 version and all works

[@DokkanLegendsKun]

Why I am not having true direction movement and skysa in nemesis in checkbox

[@Wired1upGaming]

Did you run the “Update Engine” first?

[@DokkanLegendsKun]

@@Wired1upGaming nvm I got that sorry for the trouble

[@Wired1upGaming]

No problem glad you got it working

[@MaxModifications]

forgot to include adding the skse pex files into the data script directory of skyrim. otherwise the nemesis system wont register the mods. also install nemesis directly into skyrim data

[@Wired1upGaming]

The SKSE data folder includes the.pex files. You need to install SKSE they way I show you in this video. If you want to use MO2 never install Nemesis into Skyrim Data, furthermore NEVER install anything in Skyrim Data!

[@MaxModifications]

@@Wired1upGaming Can you explain this to me more? Because it wasn’t clear on how to install SKSE, and it felt kind of rushed with the whole nemesis system. The only way I got it to kind of work was if I installed the pex files into Skyrim data directory after placing the ddls and exe in the regular Skyrim directory. I remember watching an skse installation video that said that. Also my nemesis system is super small window and rarely ever shows all the mods I have installed to activate, even after updated. Please help.

[@MaxModifications]

@@Wired1upGaming Please?

[@geddybear9108]

I cannot get this to work, installed following the guide plus the latest requirements MCM Helper etc, and it shows in my MCM but no matter what i do it says the plugins are not installed and its driving me absolutely nuts. Ive activated them in Nemesis, Ive updated and ran the engine, im on Skyrim SE, ive done absolutely everything and this just does not seem to work, its so frustrating.

[@cameronsaville1476]

true directional movement was working for me through nemesis but after watching and following these steps to install the other mods here true directional movement now is not being picked up nemesis? have to uninstall skyrim and all folders to start over now

[@mrgreenguy5193]

When I try to instal the ultimate dodge mod to mod organiser 2, it says the data doesn't look valid. And when I launch the game and look at the mod list, it's greyed out

[@sirmustardofhousemayonnais9907]

can you go into how nemesis works and how it can be used along side fnis for those of us that need fnis for other animations. im nervous to install all this and mess something up with the two different programs.

[@Wired1upGaming]

I was using fnis and nemesis together for a while until I dropped my fnis mods and converted to the new nemesis mods. I must say it’s a better experience!

[@ratdaddy8306]

I believe you can actually use fnis mods with nemesis - that’s how great nemesis is. It makes fake fnis folders that trick fnis mods. Not 100% sure but I’m pretty sure

[@DodevaZ]

So I'm guessing that vortex users can't get nemesis to run properly due to the patch we have to create with MO2? Sorry I'm new to Skysa and Nemesis and it's been tough so far to find information on vortex installation of nemesis and skysa.

[@Wired1upGaming]

I think you can run Nemesis through Vortex. I have never used Vortex though.

[@DodevaZ]

@@Wired1upGaming Okay I found out what the issue was: So with Vortex users using the 0.84 version of Nemesis Engine, you need to manually add it to Vortex and install it as you would any mod. Then in your Dashboard, go to new tool and add Nemesis. For "Target", you want to direct it to the executable found in the nemesis folder. IMPORTANT: In the "Command" line, BEFORE YOU HIT SAVE, type "-sse" . This is suuuuper important. include the "-" too before the "sse". Then save and run Nemesis. It should solve a good chunk of problems Nemesis/Vortex users encounter.

[@Awesomesauceuser]

@@DodevaZ Dude, thank you so much!!! I don't know how you figured this out, but doing this and running an engine update on Nemesis (not sure what actually fixed it) totally fixed my conflicts with skysa and TUDM!!! Ive been at this for a while and could not find out what was causing these problems, so thank you!

[@yaelgomez847]

Amazing tutorial! I know it's been a while since this video was uploaded... but, I was wondering if you could help me. You see, none of my combat animations are working... I copied all the steps, but nothing, and I don't know what I've done wrong. The only thing that comes to mind is that after launching the nemesis engine, when I open the override and create the mod, the "meshes" and "scrips" folders are missing...

[@Wired1upGaming]

Sounds like a bad install of Nemesis. If you run Nemesis through MO2 everything generated by Nemesis will be in the overwrite.

[@yaelgomez847]

@@Wired1upGaming I've reinstalled it all a few times (uninstalling all the mods, and starting again, folowing your video step by step) but nothing. My other animations work (running, idle, etc). I'm also using the MO2

[@Wired1upGaming]

I’m sorry but it’s impossible for me to know what could be going on your end. I hope you can figure it out.

[@yaelgomez847]

@@Wired1upGaming It's ok, thank you for everything. In the end, I decided to reinstall the game and start all over whith all my mods. This time, when installing Nemesis, I downloaded the same version as yours (0.83, not the 0.84 like I did last time) and downgraded my version of the game to 1.5.9. Now it works perfectly!

[@morgo2592]

If I was to add a mod later, would I update the engine first then put the patch and launch? Or would I put the patch and update then launch

[@Wired1upGaming]

Update, then patch.

[@lord_bole]

I saw you started it on a SKSE file, is that the loader we downlaoded at the start? Because i dont have that file when i open up the tab that also brings up nemesis

[@Wired1upGaming]

Yes, my apologies for not showing that step. If you have just installed SKSE the way I show you in this video all you have to do is close MO2 and open it again and it should be in the drop-down menu so you can start the game. If it’s not then you will need to add it manually. -Drop down menu - -Hit the + button -Title = SKSE -BINARY = the location where you installed skse64_loader.exe -Start in = The location where Skyrim special edition is installed -“Check” the box : use application icon -The hit “ok” Now you’ll see SKSE in the drop down menu.

[@zewasplays]

I'm extremely confused, because I had these mods installed and they were working fine earlier today and now they just aren't.

[@matteomariotto683]

Could you do the same guide but with FNIS? Nemesis doesn't work for me. and honestly I broke the balls of addicted to this aforementioned "Nemesis" AT LEAST FNIS until now to do the duty of him. (Obviously either I uninstalled FNIS to avoid some conflict with Nemesis since I heard that they give problems if they are together.) Or I followed this video Step by step and other videos three times and all of them lead me to the one result that Nemesis absolutely does not end me. nothing and I don't want to allow myself to stress further with a program that doesn't work. Either already taken into consideration that I did something wrong but so it is not seen that or I did the same things with another Profile on MO2. Thank you and goodbye. I will wait for an answer.

[@Wired1upGaming]

You can use Fnis with Nemesis. Nemesis generates a dummy FNIS esp as long as you have XPMSE installed.

[@PHLwinPHL]

Can u make video tutorial immersive equipment display

[@awildbread8254]

Any clue on why iam crashing everytime iam opening the game? thanks

[@MiguelPerez-dh8no]

hey I love your videos, I did all the steps but the anniversary version must have broken something, you could make a new video in a few months when the AE version has more compatibility.and I think it failed to install the MCM helper.

[@Wired1upGaming]

Thanks 😊 I will do that.

[@blizzard3716]

I dont have anniversary edition i dont have anything that should be glitching it, but true directional movement just outright doesnt work, nothing shows up in the MCM menu i have everything installed that it says in the requirements the only thing that could be causing issues is the fact that i have an out of date skse but even then im on vortex and have no idea how i would go about updating it

[@Wired1upGaming]

Install MCM helper

[@fatalis_swmg]

I'm out fighting wildfires and I'm away from my computer, but I believe I have compatibility issues with the skeleton mod for cbbe and nemesis? And I can't run true directional movement because of it. But some of the other ones work like the combat and dodge stuff. Any words of advice or clarifying for what I can do?

[@Wired1upGaming]

Are you using the 3BBB mod?

[@fatalis_swmg]

@@Wired1upGaming yes but I changed away from it to a substitute mod. Still have it installed tho

[@Wired1upGaming]

I will look in to it a little later and get back with you. Be safe out there brother.

[@fatalis_swmg]

@@Wired1upGaming very appreciated brother 🙏 right back atchu

[@k435c194]

i do not have the "scripts" tab in the overwrite folder when i click on it... I tried re running nemesis a few times to see if it would appear and it is not. Did I install something wrong?

[@holyassassin1985]

nemesis isnt working for me, its saying that it failed to generate behavior because its trying to access a file in the meshes folder under data but that folder nor does the file even exist in the data folder for my skyrim. Does anyone have a fix for this? ive followed every step exactly and even reinstalled all of them and ive had no luck Edit: Nevermind, found out i installed nemesis wrong. after putting the 3 files "Nemesis engine, meshes, scripts" into the data folder for in my Skyrim folder, it fixed my issues

[@JR13Real]

I keep getting the error ERROR(6002): An exception has occured while patching. Report to Nemesis' author immediately File: magic_readied_direction_behavior.txt Message: boost::filesystem::copy_file: The system cannot find the path specified: "cached_behaviors\SSE\magic_readied_direction_behavior.hkx", "g:\the elder scrolls - skyrim - special edition\data\meshes\actors\character\behaviors\magic_readied_direction_behavior.hkx"

[@Mauas15]

when i open the nemesis again for behavior the true direc and skySA not in the list, why? its only true dodge

[@mateusseabra6520]

Can you only do this in the steam version? I tried with a cracked version and everything went right except for an problem with the Nemesis, but i manage to fix it. In the end, i launched the game and nothing happened in it

[@albertcser9730]

Thank you very much....

[@carlosalejandro7302]

I has this error, what should I do? ERROR(6001): An exception has occured while updating. Report to Nemesis' author immediately Message: boost::filesystem::create_directory: El sistema no puede encontrar la ruta especificada: "temp_behaviors\_1stperson\"

[@carlosalejandro7302]

When i launch Nemesis behavior Engine these too Checking engine version Engine is up to date Version Code: 4792-1322 Initializing behavior generation Mod Checked 1: nemesis Mod Checked 2: tdmv Mod Checked 3: tkuc ERROR(6002): An exception has occured while patching. Report to Nemesis' author immediately File: temp_behaviors\xml\_1stperson\ Message: boost::filesystem::create_directory: El sistema no puede encontrar la ruta especificada: "temp_behaviors\xml\_1stperson"

[@Wired1upGaming]

Do you use windows 10?

[@carlosalejandro7302]

@@Wired1upGaming Solve i change my lenguage to united states and it woorks! Great video man

[@leanburrito]

I wonder what I'm doing wrong. I'm only able to get into stance and my attacks are vanilla

[@adamabdelfattah9040]

Legend :)

[@moonface3351]

i'm getting error code 1008 for nemesis, tried reinstalling, spamming the update button but nothing is working. I've followed all of your steps. . .

[@Wired1upGaming]

I don’t know what that error is..

[@chyoei]

Hey, Wired1upGaming. Do you happen to have a modding guide for your modlist? I mean like the ones by those who post their modding guides on Nexus or other websites. They teach people like me who are not very familiar with modding step by step in details.

[@Wired1upGaming]

Unfortunately I do not. However I will be making more videos on Modding Guides in the future.

[@chyoei]

@@Wired1upGaming Never mind. I can still use your modlist and your videos while checking out other skyrim modding guides in wording details.

[@nethalar]

I've got a lot of stuff setup thru Vortex and was wondering about the Nemesis installation in relation to the program. Would it be as simple as importing the zip file and hitting install? Relatively new to Skyrim modding after playing Vanilla for years.

[@Wired1upGaming]

I don’t really know how to use Vortex. I tried a while back to use it as my mod manager but I hated it. I know Gopher and Gamerpoets have some great tutorials on vortex setups.

[@nethalar]

@@Wired1upGaming All good, I figured out some stuff through trial and error and got everything working as intended. Basically the same process as this vid except with some different UI to work through. Now to slay some dragons and stuff!

[@mrcatmanz]

@@nethalar How did you get it to work with Vortex? trying to figure it out myself

[@rodroeq7956]

Please Help, has someone figure out what happens with MCM and some mods not showing, I fallow every step here and TDM doesn't show. Stop on slash don't load at all in mcm.

[@Wired1upGaming]

You need to have MCM helper

[@bryerTuck]

Hey. Did everything the in the video but I'm getting an error when launching nemisis behavior engine. I'm getting missing file error. Looks like it can't find the files in data\meshes\actors\character\behaviors\attackbehavior.hkx. Tried looking online but can't find any help

[@bryerTuck]

Got It. Looked around on Nemisis Github and found that you have to disable Windows Security Real-Time Protection before running Nemesis. Weird, but it works.

[@Wired1upGaming]

Sorry I couldn’t get to you sooner, but I’m glad you got it working! 👍🏼

[@MidnightDrake]

So, the Ultimate Dodge Mod isn't appearing to work, any ideas as to why..?

[@WithoutNumbers]

But how to dodge and roll separate of the crouch and fix the slow walk with rotate camera when you walk back by pressing S in 1st person mod? Any idea how to fix it will be appreciated and legendary ;D

[@WayneAdder]

I followed your video to a T and when I went to generate the patch I keep getting a 6002 error and it doesn't generate the patch. Any ideas?

[@drunkentoti9368]

anyone had this problem with dodging that the player is stuck in mid air? any solutions?

[@quentins8165]

Read one comment that says you need to change the dodge action in MCM from Roll+Sidestep to Roll OR Sidestep, when it gets both commands it glitches

[@sjbonadonna]

I followed step by step but when I launch the Nemesis executable I get an error that the path to mods cannot be found.

[@Wired1upGaming]

Launch through MO2

[@coreys1mons330]

when i load in it says skse cannot be found,im not sure what i did wrong besides name it not exactly specific to the video

[@J4ymzz]

Everything else worked just fine except the TUDM/TUDMR. Probably cause they are not compatible with the AE release (yet). But thanks for the great tips anyways :)