Рет қаралды 54,094
Like what we're wearing? Grab yourself some merch!
Salvage to Savage Gear:
www.salvagetosavage.com/shop/
Want to see some more cool builds, daily posts & giveaways? follow us on IG!
@SalvagetoSavage
------------------------------------------------------------------------------------------------------------------
This week we're getting our bagged Chevy C10 back on the road! Last time you saw this squarebody truck, we replaced the rusty cab corner that plagues all of these older C10s, and created a gorgeous C-notch cover for the bed. It's now time to address all the things that make this squarebody run! Khalel is replacing just about every gasket in this motor. While he's got it all pulled apart, he's giving our intake manifold and block a nice fresh coat of paint. The old tail gate no longer wanted to open and close, so we ordered up a new lever kit from LMC to make sure Eric will have no trouble putting anything in the bed of this truck! We also have a brand new Air Lift performance system going into this Chevy C10, along with a new air tank. The old manual system just wasn't reliable anymore, so we fitted this squarebody up with a system that will not only raise and lower this truck every time, but also has presets to make sure the truck is always sitting at a level height! With the new air ride system installed, this patina C10 is ready to hit the road again! We have a ton of other squarebody content coming for you guys as well. Our Tesla swapped C10 is going to get it's new coil overs soon to complete the push rod suspension system, and we're also super close to getting our LS swapped K10 ripping through the mud. So make sure to subscribe so you don't miss out!
----------------------------------------------------------------------------------------------------------------
Want to switch up the suspension is your car or truck? Check out Air Lift Performance!!
www.airliftcom...
-----------------------------------------------------------------------------------------------------------------
Want to See More S2S Madness???
Tesla Swapped C10 Pushrod Fabrication
• Tesla Swapped Squarebo...
EV C10 Custom Billet Rocker arms!
• Tesla Swapped Squarebo...
Making Custom Headlight Intakes for the Turbo Chevelle!
• Twin Turbo Headlight I...
LS Swapping the DMC12
• LS Swapped Widebody De...
6.0 Swapping a Lifted K10
• The Problem with Junky...