Slammed C10 Stepside Suspension Install - 1962 Chevy C10 LS Swap Ep. 3

[@b6s4shelter]

I got to give props to your editor. The audio choices and quality of audio recordings are tops and make watching enjoyable. Thanks Mikey Rollss and crew!

[@SalvagetoSavage]

Thanks so much for the feeback! We really appreciate all your support!

[@JMRRebuilders]

Love it brothers. Wheres my man Timmie

[@SalvagetoSavage]

He moved on to other projects unfortunately

[@JMRRebuilders]

@@SalvagetoSavage rough brother wish him the best. Really love your content brother. Keep getting after it.

[@dave5833]

Sometimes your work leaves me with a lack of words.

[@SalvagetoSavage]

Hopefully in a good way!

[@dave5833]

@@SalvagetoSavageAll Ways have a great weekend.

[@johnbehneman1546]

THANK YOU SO MUCH!!!! I LOVE IT!!!! TOTALLY AWSOME UPGRADES!!!! GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!!!!

[@SalvagetoSavage]

Glad you liked it!

[@FrankTheKoyFish]

Watching these keeps my adhd at bay

[@SalvagetoSavage]

Let the adhd take hold and buy tons and tons of project trucks. That's what we do! lol

[@FrankTheKoyFish]

@@SalvagetoSavage I have too many projects as is lol although an old Ford does keep calling my name..

[@chrisr4815]

One of the best automotive channels on youtube.

[@SalvagetoSavage]

Thanks so much!

[@joesilvasr9733]

Mikey, I sub to a bunch of car and truck KZbin channels. You guys are on the TOP of the heap👍

[@SalvagetoSavage]

Thanks so much Joe! You don't know how much that means to us. We really hope you like all we got planned for 2023!

[@SomeBoredGuy69]

I keep praising the workmanship of the team you have assembled. They deserve every bit of praise they get!👍 I also want to praise the amount and quality of the content you keep putting out on this channel. Each video is packed full of progress. Yet, you edit it down to just the relevant clips. This channel continues to set the bar VERY HIGH for other car build channels to aspire to. By far, my favorite car build channel on KZbin. Keep up the good work.👍😁 Since there is so much panel patch work done. Will you be doing a full paint job or will you attempt to replicate the patina?

[@SalvagetoSavage]

Thank you so much for the support! We're going to replicate the patina on this one. The owner wanted to preserve the original color of the truck

[@TrevorAngell]

Thank you guys for keeping it clean. My kiddos like to watch with Dad.

[@SalvagetoSavage]

Our pleasure! Thanks for including the family. We're always stoked to hear that!

[@ESharp79]

I love Wednesdays! Always look forward to a new S2S upload!!

[@SalvagetoSavage]

Thanks so much for stopping in!

[@kruxi_cro]

You guys have become one of my favorite channels. Keep up the good work!

[@SalvagetoSavage]

Thanks so much!

[@Jack_2752]

Same!

[@frankfurther3828]

Great project. Really great production and editing. I had to pause it to make this comment. Don't wanna miss anything.

[@SalvagetoSavage]

Wow! We really appreciate that. Thanks so much for the support!

[@tommyrazor11]

“In Rust We Trust” hahaha Always look forward to an S2S Wednesday Video Drop. Nothing like transforming a dirty and tired 60 year old work horse into badass machine

[@SalvagetoSavage]

Got love it when the truck cab comes with a little extra present to make a mess on the shop floor! lol

[@bazilwreckerloughead]

Seeing the body work done THE RIGHT WAY (cut out the rust & replace it with new metal) reminds me of when a buddy of mine & me were restoring his 1971 Mercedes Unimog last year; we rebuilt almost all of the lower metal, it was kind of a mess, worth it though, it looks great now!

[@SalvagetoSavage]

And it won't all crumble apart when you're running down the road!

[@Farris2K]

I've got 3 dream vehicles. 62 C10 Stepside, 82 C10 Squarebody, and 65 Mustang Fastback. I've dreamt of a Tesla swap, LS swap, or body swap on all of those. It's like you're going down my checklist of dream vehicles. S2SLA, now this. Next project a 65 Mustang Fastback body swap onto a brand-new Mustang? That would wrap up all my dream vehicles on 1 channel. Love this channel. You guys are great.

[@SalvagetoSavage]

We did an EFI conversion on a Big Block 69 fastback with some custom headers a while back! Check that one out, you might like it!

[@richardharvey8939]

Love y’all’s work

[@SalvagetoSavage]

Thanks!

[@joseluisnba1]

Awesome job. Can’t imagine how much a job like this cost. You are doing jobs that we here en PR 🇵🇷 can only dream about. Keep it up!👍

[@SalvagetoSavage]

So glad you like it! Thanks for the support!

[@George-zq2sk]

this channel is incredible!!

[@SalvagetoSavage]

Thanks so much!

[@billrutter5246]

Great job again Mikey and the boys

[@SalvagetoSavage]

Thanks!!

[@frankfurther3828]

Dig the working deck. Work like gentlemen.

[@jjfordingpoursoulstudios8581]

I've always wanted to this to a 66' with a cameo bed. Loving this build so far, and looking forward to seeing it completed!

[@hotdog7214]

Another great build. Need some more rare builds like the travelall and delorean!

[@nicolelongneckergallery]

What a start to my day... an S2S video.

[@SalvagetoSavage]

Love seeing you back here! Thanks so much for the support!

[@paul3dwards]

Can’t wait to hear that supercharger! 🙌

[@SalvagetoSavage]

It's going to sound so sweet!

[@UncleManuel]

Looks like this part of the build is in the bags. ... Pun intended. 😂😁😇

[@SalvagetoSavage]

hahaha! YES! Thanks for stopping by with another pun! lol

[@willemp6432]

All most forgot to give this a like...👍👍👍👍

[@SalvagetoSavage]

Thanks will!

[@Jusdin057]

I would love to see the top of the notch brace exposed in the bed. I love the look of that top piece where the air shock mounts.

[@SalvagetoSavage]

We might have to do a thin mesh insert in there so you can get a peek at everything under there!

[@billybike57]

The whole teams seems to mesh, well done!👍🏼

[@SalvagetoSavage]

Thanks!

[@andywilcox7019]

Comment for algorithm, truly deserved. You guys F ing rock!

[@SalvagetoSavage]

Thanks so much Andy!

[@DuminguMphande]

Sad to hear Tim left but we move. project looks so dope man. i have a thing for trucks on air ...

[@SalvagetoSavage]

We can only adjust and improve on ourselves! Thanks for all the support!

[@DuminguMphande]

@@SalvagetoSavage indeed.

[@richarcruz7843]

Guys keep grinding making Epic builds like this May God Bless

[@SalvagetoSavage]

Thanks so much!

[@davekeogh]

Really starting to come together boys.

[@SalvagetoSavage]

So close to getting her driving!

[@ResponsiveResolve]

Slingshot engaged!!

[@jonjon_az]

Put some scrape plates on bottom... so when you lay frame while driving on road it throw sparks.

[@SalvagetoSavage]

Oooo! That's a great idea. We need to pick up some titanium!

[@Will_my65gmc]

What was the deciding factor to go with the air ride shocks rather than the bags it was set up for? Also, the upper brackets for the front driver side shock may possibility be in the way of a bracket you may need for a steering shaft support if you end up needing to go with a three piece steering shaft like I did. I'll send you a couple pics on IG for reference. Everything look great! Looking forward to the next episode!

[@MrTimdtoolman1]

Great to see some more S to S content. You guys are killin it.

[@SalvagetoSavage]

Thanks Tim!

[@charliemclaughlin1042]

Finally a great video on KZbin today you guys are awesome 👍👍👍👍👍

[@SalvagetoSavage]

Thank you!!!

[@mblake0420]

I had one of these in blue when I was 15.....had bad engine and dad talked me into selling for a cd burner lmao

[@fishpony1211]

Niice. New guy is fitting in well. Very cool dude

[@SalvagetoSavage]

Dave is awesome!

[@tony-ps4qw]

excellent craftmanship!

[@SalvagetoSavage]

Thank you!

[@bigjoe3639]

Killer work! Just think you shoulda sprayed some weld thru primer on the inside of those patches and all inside to prevent future rust

[@SalvagetoSavage]

We've found that weld through primer is a bit of a headache to work with. What we use (that didn't get featured in this episode) is the rust encapsulator that we use that neutralizes the rust!

[@lunkydog]

If you've setting the pinion angle at zero, that means you're sure the engine and transmission are going to sit dead flat too. At that point it'll need to be offset either higher, lower, or off center or your U joints won't live.

[@inforolleri4191]

we will be running a 2 piece drive shaft so theses some wiggle room

[@joshuascales7475]

I'ma send ya'll my '63 lol. Good work by you and your crew Mike!!! Best channel on KZbin!!! Also where the heck did Timmy go!?

[@SalvagetoSavage]

Send it our way! Unfortunately Tim moved on to a different project

[@bobbyg313]

Another great video with great editing. Love seeing new videos from yall

[@SalvagetoSavage]

Thanks so much!! We really appreciate your support!

[@enricodigenova8112]

Great video guys love the build 👍👍has Tim left the company

[@SalvagetoSavage]

Thank you. And yes. unfortunately he has moved on

[@enricodigenova8112]

@@SalvagetoSavage all good it looks like you have some great workers there that know what to do 👌👌👌keep up the great work

[@mrm4155]

Frickin sweet!

[@THROTTLEPOWER]

Looking good, great vid!!! 👍👍

[@SalvagetoSavage]

Thanks!!!

[@THROTTLEPOWER]

@@SalvagetoSavage 👍👍

[@smedlap8789]

Nice! 😍

[@SalvagetoSavage]

Thanks! 😄

[@Thewatson77]

Always a pleasure to watch your posts 🙌🏻

[@SalvagetoSavage]

We really appreciate that!

[@onemansvideos2134]

I really like those wheels

[@SalvagetoSavage]

Detroit steel makes the best steelies for sure!

[@stigrunetefke2157]

This will be a awesome C10 :)

[@IIVIIV_S.A]

🤙Dope content!

[@SalvagetoSavage]

Thanks!

[@launceherron]

Another amazing video

[@SalvagetoSavage]

Glad you enjoyed it!

[@GlassWerx]

Lookn good. Saw you guys on street trck magazines ls fest coverage.

[@SalvagetoSavage]

Hope you liked it! If you want to see us cover more events, tell the guys at StreetTrucks!

[@GlassWerx]

@@SalvagetoSavage definitely will do.

[@SubToTripleThreatRC]

Making dreams come true.

[@SalvagetoSavage]

One day at a time!

[@paynefulmechanix9675]

Aren’t y’all in Miami?! Hope your team and y’all fared ok. From the news, it sounds like y’all took a beating.

[@SalvagetoSavage]

We're about an hour north in Boca Raton. We got some rain and some wind but we got super lucky! Can't say the same for our friends on the west coast though, unfortunately

[@TomMelling228]

So damn cool

[@SalvagetoSavage]

Thank you!

[@oldblueshhrchannel1847]

Great, job! Mike , I don’t see Tim in the shop. Just Andrew and David.

[@SalvagetoSavage]

Tim has moved on unfortunately

[@oldblueshhrchannel1847]

@@SalvagetoSavage Sad, wish him well if you see him.

[@hoagiesherlin7732]

Pimptastic!!!

[@SalvagetoSavage]

Thank you!

[@Siyadlams]

This build is looking good guys. That air suspension is sweet and silent. Just one question, is there a noticeable difference between the metal that’s been put in place of the rusted one and the rest of the car?

[@SalvagetoSavage]

No. It flows pretty well, and it will be even more seamless once there's body filler and paint back on there!

[@esahg5421]

go negative drop. so low the wheels off the floor.

[@MachineDr.]

Loving this build! Have not seen much of Tim lately. Everything good there?

[@SalvagetoSavage]

He moved on to another project unfortunately!

[@MachineDr.]

@@SalvagetoSavage Gotcha, is he still with you guys?

[@feo_46]

The engine installed without soft cushions will give vibration to the frame.

[@pedrofernando176]

✌👍

[@BigThomTattoos]

Fuck'n Florida!

[@rico55pr1]

Wouldn't rot from behind know since the medal wasn't treated?

[@SalvagetoSavage]

The metal was treated with a rust encapsulator. We just didn't highlight it in the video

[@brickcity9mm896]

💥DOPE💥 💥💥🔫

[@jimboyokel]

If you get a flat tire in the front is the lower shock mount going to hit the ground and cause a loss of vehicle control? I know DJM had an issue with this on their lower control arms back in the day.

[@wkrick]

Why aren't the headers symmetrical from side to side? Is the engine not centered in the chassis?

[@SalvagetoSavage]

Headers generally aren't symmetrical as the drivers side needs clearance for the steering shaft. That difference for us meant that the drivers side clears and the passenger side mount had some overlap

[@dirtlifemagazine]

Isn't that orange Chevelle supposed to be at SEMA...that's only a few weeks away

[@SalvagetoSavage]

No, we decided with everything we have going into it, to hold it off until SEMA 2022. We needed a break from the SEMA stress after last year

[@s2kpdxt666]

Did you guys used a short medium or long air lift shocks. Nice truck man

[@jbrawner1000]

What do your trailing arm pads from QP measure front and rear bolthole centerline to centerline frome each other? Trying to make sure my 62 measures the same. Thanks in advance.

[@SalvagetoSavage]

Not sure brother, that truck was done awhile ago. Call Nat from Porter Built fabrication

[@Scott_G]

When you guys are pulling all that shit out behind the rust patches, are you spraying anything up in there to clean it out before patching and sealing it back up again? I have no idea how you'd clean that to prevent it from rusting out again down the road.

[@SalvagetoSavage]

Yes! We get as much out as possible then spray the rest with a rust converter to prevent the remaining rust from spreading! We'll be touching on it more in next week's episode!

[@Scott_G]

@@SalvagetoSavage Very cool! Thanks for the info!

[@v8sten94]

Now cut the drivers side shock mounts to match the passenger side. My OCD is not happy........

[@SalvagetoSavage]

We'll just do a lil shaver-roo lol

[@0922jus]

what about the rot and rust behind the repair?

[@SalvagetoSavage]

Ground down as much as possible and handled with a rust neutralizer!

[@lordlardofframs]

Where is Tim?

[@SalvagetoSavage]

He moved onto another project unfortunately

[@bigblock1968impala]

11:39, whats that giant bug walking towards the stand

[@toddshimonek3801]

Morning Boys what make of long tube headers did you use ??

[@rayrodriguez2128]

Say nice job on that C10 truck where located

[@SalvagetoSavage]

We're down in South Florida!

[@rayrodriguez2128]

Wish you guys were in Dallas Texas I need help with my truck

[@rayrodriguez2128]

Got a problem want start can you help

[@LilJayV10]

Are you sure the LSX 376 has DOD and VVT?

[@SalvagetoSavage]

It's not an LSX 376, so yes lol

[@IsmailNuzaifKokky]

.

[@masterfabricator]

Mikey why do keep calling Dave David why the full legal names for the guys its not the 1940s so why full legal name?

[@SalvagetoSavage]

Because if Mikey calls David "Dave" legally he'd then be a free elf and could leave the shop.

[@mblake0420]

The classic car ruining channel

[@halliwilljon]

You guys make it look easy!!!!!!!

[@SalvagetoSavage]

We cut out all of the cursing and tool throwing! lol

[@TastingTheHeat]

(Just trying to keep my comment G rated) “OMG you make some cool stuff” 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@SalvagetoSavage]

Wow, thank you!