Excited to know that you’ll be joining the community once lowered
@lexhimself876 Жыл бұрын
Just installed my D2 springs on my 21 accord se 🔥
@AuthenticAlexndr Жыл бұрын
Congrats on the setup fam! I can only imagine how it looks!
@mariobarbosa309522 күн бұрын
What spring rate are yall running on both the front and the back ? I know you showed it on the slip but it shows number codes and not the actual spring rates
@stalyncampos73833 ай бұрын
I got the same car same coils the back looks just like the vid however my front did not, could it be bc i didnt go full negative on the camber???
@AuthenticAlexndr3 ай бұрын
It’ll definitely be due to the camber plates and where you set them at but also depending on how low you set the front coilover, the lower you set your coilovers the more natural negative camber you’ll get.
@jonathanpineda3378 Жыл бұрын
Gyattt video came out fireeee🔥🔥🔥🔥
@jondoe8239 Жыл бұрын
Not the 3piece reps lol 😭
@K20Kosh Жыл бұрын
GMR is a good brand 😂
@aalexander29311 ай бұрын
What spring rate should o get mine, 10th gen 2.0, extreme low. Please help
@thosetwodudes11 ай бұрын
Looks good, you thinking about spacers at all? How does she corner after this install?
@AuthenticAlexndr11 ай бұрын
Thank you! We did play around with some spacers after to get better fitment and it looked great! Cornering and handling is also amazing!
@slowboyek553111 ай бұрын
Did you take off the bottom collar for you to sit that low?
@AuthenticAlexndr11 ай бұрын
We did in the rear, front was pretty ideal so we didn’t need to remove a collar upfront.
@slowboyek553111 ай бұрын
@@AuthenticAlexndrokay cool and also I’m looking at my front coils and your you guys have 5 rings springs and I have 6 rings springs if you look at the coilover spring and I have the extreme lows did you upgrade to short ones?
@AyCasti Жыл бұрын
how many inches did you guys drop it?
@AuthenticAlexndr Жыл бұрын
Initially we started with a 4 inch drop and allowed the coilovers to sit in their final resting spot after driving it for a while
@Papialltheway Жыл бұрын
Does it throw any codes if you change the struts?
@mariobarbosa309522 күн бұрын
No may throw codes for the wheels if sensors are not installed
@DavidCruz-gh3ll Жыл бұрын
Did you guys use the oem endlinks?
@jonathanvazquez32939 ай бұрын
Got the same coils but mine don’t look that low how do I max them out?
@AuthenticAlexndr7 ай бұрын
You simply use the provided coilover key to loosen the rings on each one and then twist the bottom part to lower it and max it out so your car sits lower.
@mariobarbosa309522 күн бұрын
Make sure you got the right xtreme low
@weemanvr6 Жыл бұрын
What swift springs did u go with? Need ##s
@Vila24 Жыл бұрын
Did you get any clunk noise?
@AuthenticAlexndr Жыл бұрын
No clunk with the install, I’d double check all bolts and components
@orbitalspamz31318 ай бұрын
So you need Swift springs to get this low ?
@AuthenticAlexndr7 ай бұрын
Not necessarily, the swift springs simply allow for a stiffer ride when lowering your car on coilovers for the drive.
@GiantFrmTha76010 ай бұрын
Are these regular bc ‘s or the extra low variant that’s 200$ more.
@GiantFrmTha76010 ай бұрын
And did u use new camber plates to adjust or is that stock
@AuthenticAlexndr10 ай бұрын
These are the extreme lows, so the extra low variants that cost $200 more.
@AuthenticAlexndr10 ай бұрын
The front bc coilovers are equipped with camber plates so we adjusted the front to max camber on the camber plates
@jeffreyphan5553 Жыл бұрын
You don’t have a vibration feeling going that low?
@AuthenticAlexndr Жыл бұрын
None at all, as long as everything is properly installed and torqued followed by an alignment you’ll be good
@jeffreyphan5553 Жыл бұрын
@@AuthenticAlexndr damn man
@AlanBankss Жыл бұрын
when i get my accord making it like dis
@AuthenticAlexndr Жыл бұрын
Make those dreams come true, I’m excited for you 💪🏽
@marcovalle94102 ай бұрын
My. Sway bar doesn’t reach
@AuthenticAlexndrАй бұрын
Are you using original ones or aftermarket ones provided from the BC coilovers? Regardless they should like up if you use a jack on one of the wheels to help compress the spring to help line it up.
@samarhmin3747 Жыл бұрын
How low was the drop
@iamsailesh82388 ай бұрын
That’s around 3 inches
@Vicowrx13 Жыл бұрын
Sheeeesh 🔥
@kelvin4780 Жыл бұрын
🔥🔥🔥
@ci6535 Жыл бұрын
monster truck
@AuthenticAlexndr Жыл бұрын
Next video will be going lower 🫡
@おじーず Жыл бұрын
めっちゃイカス✨️😃✨️
@AuthenticAlexndr Жыл бұрын
🙌🏼
@Mr718kidd9 ай бұрын
👍🏽👍🏽😎
@RANDOM-zc2bs Жыл бұрын
You know that is bumpy af
@gffted Жыл бұрын
Wet
@riderrocklee Жыл бұрын
Why so low
@AuthenticAlexndr Жыл бұрын
Because the owner didn’t like the fender to wheel gap