Sliding Glass Door Install - Best Practice Details

[@angellas.1314]

I LOVE that Matt highlights the important points, such as the skip sealant. Brilliant for beginners and for folks who want to learn about best practices.

[@georgiafan6618]

Love Pella. We installed them on a house up north, good quality. Pella took the initiative to include screws with their doors. 👍GRK makes the best fasteners. Quality install. Noticed double bottom plates. Was that to compensate for your subfloor and finish floor heights? There is so much to account for before install, this video addresses those factors. Excellent video Matt. Keep making them.

[@disqusrubbish5467]

Interesting details on both the leveling and skip seal on the outer side.

[@GraingerProductions]

Great video. Really like the detail on the GRK screws used.

[@brettgallmeyer]

I was suprised to not see a still pan being used. Did you not use one because of the large overhang?

[@douglaslashuay]

Is there a resource for finding best practice contractors?

[@DoubleDoubleWithOnions]

Craigslist. 😄

[@Bigelite094]

Idk about shimming the plate. I would plane that and maybe touch it up with a grinder flapper disc.

[@patrickkenny2077]

All depends on how the finished floor elevation is managed.

[@MichaelJ674]

Great video Matt. I’m curious about the framing for the slider. You are a proponent of advanced framing techniques to minimize material use and maximize insulation, so I’m wondering why there are four studs on one side of the opening and six on the other. Seems like overkill. Im wondering if more efficient options were considered or did your framing crew just default to the cheapest, easiest option. Otherwise, great info. Thanks.

[@jacobb7639]

What's going on with Matt's hands at 8:49 ? Lol

[@benysarmiento2176]

. jajajaja

[@DoubleDoubleWithOnions]

Looks like he's telling a Jackie Marling joke.

[@andrewgavi]

What size is the sliding glass door?

[@tvrift]

Quality is a thing of the past.

[@robertnash2446]

Instead of cutting the top plate and shimming......why dont you just leave the top plate in tact and use a planer to take out the high spots to get everything plumb & level.

[@UsualYaddaYadda]

Perhaps, because it would result in the door frame lower than the insulated floor level (level with the top of the upper sole plate) that he said he'd be installing.

[@christophersloane6203]

kzbin.info/www/bejne/hYGXdH6kbZukfbssi=251I3CfYHL6M8Tpv

[@Lokgolo89]

There's the opposite side to consider as well, if you raise the sill, the subfloor will also have to adjust upwards in order to be level. Easy solution for the door, but sounds like introducing problems downstream that aren't considered within this scope.

[@davinschultz8672]

👉👌 zip tape seals! LOL made me laugh.

[@joshbryant7363]

👌🏽👈🏽…really Matt. 😂

[@BigTee-lp7qu]

Outside slider? Why? Won't there be more track contamination over time?

[@Eridan3766]

Where's the house plan link

[@robertnash2446]

Why do you need 3 inches of sub floor and final flooring....seems a bit thick.

[@careykaeding4542]

R-value?

1.5” framing system, 7/8 plywood

[@texasaggie8854]

We do it in high end homes to guarantee a perfectly level floor. Sleepers are set first in tar and then planed till everything is level. That’s then followed by attaching plywood to the sleepers and again any high spots are removed. It takes awhile but the end result is perfectly level wood floors. For tile we use float in place of the sleepers and plywood. It also makes it easier to have all flooring at the same level when a customer decides to use different flooring materials of varying thickness in adjacent rooms…

[@angellas.1314]

A lot of areas of Texas are built on swamps. Maybe for stability?

[@RoscelynTabora]

Hi Matt. Is there an email where I can reach you out for a potential collaboration?

[@xzibit8614]

This channel and Matt has become a sellout. Every video revolves around some brand sponsoring a particular product, this a video, so regardless of good or bad, Matt will give it a glowing review, well, because it’s sponsored and padding his wallet. Just unsubscribed, and I think many will too eventually. This channel has become one giant ad commercial for whoever is willing to pay.

[@MichaelJ674]

I don’t mind sponsorships for good quality products that Matt believes in as a builder. He has many of these products in his own home and he has to stand behind these products when he installs them in other people’s homes. Sponsorships also allow him to produce more content and more quality content. He’s running a business not a charity and this is a standard business model in the social media world. Seems more prudent to be wary about sponsored products and services, do your own research on what products and services are good for your projects, and then just enjoy the content and learn as much as you can from it. Or unsubscribe if you’re a sponsorship purist and miss a lot of good content 😊.

[@WoodWorkinMan1]

First for once!

[@Pembroke.]

Congratulations

[@mitchdenner9743]

Your gay

[@WoodWorkinMan1]

@mitchdenner9743 I don't take much offense from troglodytes finding their opposable thumbs lol

[@BigTee-lp7qu]

@@mitchdenner9743 looks like you're the one with dck on your mind.

[@deonfackler5588]

Language matters. It is why we switched from Master bedroom to Primary bedroom. It would be great if you switched from man door to person door or swing in/out door or some other word combination. Matt is so good about talking about men and women as crew or in the trades most of the time which I appreciate with a daughter going into the trades. More then just men will be going through the doors. Every time I hear man door in one of the videos I notice the non inclusive language, which is unusual for Matt. I can't wait to see the floors with those doors and the low barrier entry they will create.

[@apex007]

Thanks snowflake

[@TurdyMcTurdface]

So sensitive over terms that mean very little. He's referring to a bedroom and a door. It's sad and pathetic that triggers you. Says more about you than Matt.

[@williamdemilia6223]

I catch myself always saying the same but I do correct myself. So hard to change.. you are correct. I use 'people' door. sorry.

[@BigTee-lp7qu]

Does person door create a better learning experience for you? Worry more about learning and less about how you get there in most cases and we will all be better for it...

[@apex007]

the US has gone to shiet with all the PC nonsense

[@charlesviner1565]

LET'S GET GOING 👍🔨📐