Mesa Tactical makes a QD plate that replaces the black steel spacer between the back of the receiver & the front portion of the stock assembly.
@GearAndGunsАй бұрын
@@Urbicide thanks for pointing that out. I forgot about those. Not a huge fan of that style personally.
@UrbicideАй бұрын
@@GearAndGuns I found out about those when I was talking to Mesa's tech. Never seen one or heard of them before that.
@GearAndGunsАй бұрын
@@Urbicide they look cool I just don’t like how they stick out.
Ай бұрын
Do yourself a favor and get an aluminum barrel clamp. The screws on the stock poly clamp are notorious for stripping. Took my LTT tactical to Thunder Ranch and it was the most fun I've had in a long time.
@GearAndGunsАй бұрын
Thanks for the input. I was thinking about doing that but forgot about it. That stock barrel clamp does seem like junk. Glad you’re training and having fun.
@sogebk4 ай бұрын
badass channel, enjoying the content
@GearAndGuns4 ай бұрын
Thank you! I’m glad you’re enjoying the content.
@Nubel764 ай бұрын
Nice content thank you, is the QD a Magpul or BCM?
@GearAndGuns4 ай бұрын
Thank you. The qd I used in this video was an extra I had from my benelli m4. On the mod 2, I believe they changed the barrel clamp qd to make it fit more standard qds like the bcm and Magpul. I checked to make sure and a bcm qd does fit in these mod 2 barrel clamps. I saw a video on a guy with a mod 1 I believe and he said standard qds don’t fit in those barrel clamps but I couldn’t confirm that myself. He said to drill out the whole a bit more. If you have a mod 2, bcm and Magpul will work. Couldn’t confirm will Magpul but I believe it’s the same dimensions as bcm.
@mdjak36863 ай бұрын
Well done. Ty. Question. Does the cheek weld piece adjust? Yours looks like it’s slightly elevated. TYVM.
@GearAndGuns3 ай бұрын
Yes it does. It has 4 different positions I believe. I adjusted it upwards to put my line of sight with my red dot when I have a full cheek weld. It works well so far. With the standard stock, that does allow you to add the kickoff system which reduces recoil and that’s pretty cool as well.
@mdjak36863 ай бұрын
I have the 1301 mod 2 with pistol grip and mesa tactical stock or butt. Looks like yours. I removed the 4 screws, 2 on each side, and that portion seems stuck in. Afraid of breaking it.
@GearAndGuns3 ай бұрын
@@mdjak3686 it’s difficult to get off but you have to slightly and carefully outwards on both sides of the cheek riser to get it to slide out easier. There’s also 4 nuts on the back side of the cheek riser where the screws thread into so be careful when taking it off that those don’t go flying out.