project 8f8 new head gasket who dis

[@joshlawson4971]

I love the " we are trying to have fun I know it's not done yetsome of y'all need to chill the f out" I actually laughed out loud. Love it 🤘🏻

[@chanzsafari]

The best personalities in these videos, proof it’s all about having fun lol videos makes for a nice night of work.

[@mdavidson101]

$8,999 is still 8 grand, just like running an 8.99 is having an 8 second car.

[@TomsTurboGarage]

Thanks for the update Matt, great work all around!

[@s10issues84]

Real glad to hear that the 6 liter passenger head gasket is going to stay, should make magic with the 5.3 gasket as a partner, because well, why not? Really appreciate all you and Mark do to show some things aren't as important as people think. I like your head work.

[@normalguy556]

Hey man, take your time and get it right/safe. If everyone is so worried about you getting this done, maybe they should build their own and see how much work actually goes into these things. Build is turning out great, thanks for taking the time to make these videos.

[@LT3Fluffy]

The audible jerks are the ones who have never pulled a motor in their life and like to tell others how to do their jobs. Learned so much from you guys while doing my own LS swap and most of us know that you've got a life too and projects like this dont happen overnight

[@reapermech]

ty for the update , glad you guys are keeping safety a priority on this project

[@chrislarue07]

Cant wait to see this thing go down the strip

[@Stevesbe]

Most definatly

[@BlaserBuilds]

"Soggy bread" got me for sure! Lol.

[@3800TURBO]

You boys make me want to build another car. Fun times. Mark's laugh cracks me up lol.

[@xozindustries7451]

I'm so glad that you went with the safety equipment, that head gasket failure at the track could have been catastrophic, I've seen people die right in front of me at a race track, it happens faster than you think, always plan for it and hope it doesn't happen. Be safe, don't just send it when your life depends on it.

[@RustingSoftly]

That coolant looks like it was really eating up that paper material. Nice job guys.

[@Brother2Jis_27s4]

Waiting patiently for a vid when it pulls the tires👍🏻👍🏻👍🏻

[@justinvanburen8259]

I love it keep up the great work!!! Slow and steady is fine with me, hell with them fast peps!!

[@teacherm96]

Please take your time and be safe as you get closer to testing at the track.

[@SloppyMechanics]

We’re trying we know mistakes are made in a rush

[@rgtunesllc.......852]

I can't tell enough people about this build ! You are bad ass Matt! Fuck a $10,000 motor! Ls junkyard 100%

[@MrAristes]

I would LOVE to see this thing running at Bowling Green LSFest. Great work as always.

[@SloppyMechanics]

That’s the plan

[@westschleife]

Love what you are doing man. Power to the people.

[@evanjarvi406]

Matt starting video little spicey dropping couple f- bombs in first couple mins had me laughing my ass off! Cant wait to see results good luck mark and matt.

[@chevytruckjerry]

This channel has quickly started to become my spirit crustacean

[@denisohbrien]

that cold start tune. you should do a video on cold start and cranking enrichment, helps some fellow KZbinrs.

[@paulfisher8700]

:Cough: :Cough: Cleetus

[@wobblysauce]

Zing.

[@GregorySalvatore]

Looks like a fun build... good luck with it.

[@flexmasterscx1056]

That cam sounds sick. Awesome!

[@knuckshaft]

Loved the update! Excited for more.

[@Brooklyn-bn5go]

Stay on course you are doing it the right way, my guess is after a shakedown run or two it will dip into the 8s and repeat it many, many times.

[@alexrozier6550]

Awsome Matt and Mark great job. Keep up the great vids guy's iam enjoying them.

[@cread80dsflkdsh]

All the dad's on here know why it's ''taking so long''. We know it's ok to get there when you get there.

[@JoeHynes284]

I like the way he cuts his grass, I appreciate the lines

[@trapspotcustoms627]

"Some of you guys can chill the fuck out" i love it 👌🏽💪🏽🤣

[@TheOVETSSTEVO]

Thanks for the update!!! Can’t wait to watch it make a pass!

[@masimpson86]

Sweet, and I just commented yesterday on IG about looking forward to another long 8f8 vid lol

[@codycole8]

Finally seeing the light at the end of the tunnel! I'm ready to see this thing in person at ls fest. (hopefully)

[@MrOgre1110]

Great job with keeping the budget, so often you see a how ever many k challenge and the budget is out the window the first episode. Safety should be a freebie!

[@basscube5]

Usually when I clean the decks on LS heads after the scraper treatment I like to use wet/dry 800 grit with a sanding block and WD40, it gets the surface like brand friggin new. Obviously your way works too, just figured I'd mention it.

[@basscube5]

Oh yea, it's hilarious how that bunch of clowns over on ls1tech lose their minds when someone asks about reusing head bolts and gaskets when they work perfectly fine. 65ft-lbs with some grease and you're g2g every time.

[@wymansst]

“some of you need to chill the fuck out”. That was worth the price of admission alone!

[@jeremymcnicol9585]

Thanks for posting. This build makes me want to sell my 2011 Mustang and try and run 8's in something sloppy 👍

[@JohnMartin-eb7jn]

Matt, I think this is the longest you have gone without showing smokey burnouts on the street. Look forward to seeing it on the track.

[@TurbineResearch]

“ yeah we got a new CNC in here we’re gonna do a skim on these heads” hahaha it’s cool to see that Mark has two bad ass beast boi Camaros but he also loves skimming a head with sand paper and putting it on an 8sec “ beater”

[@RiverbendCycles]

Glad to see an update. 👍👍

[@Kuzican01]

The HP Gods said "This one's on me, the next one's on you." So awesome!

[@94jimmy5]

What's not to like about this build? Function over form! Lots of fun without a ridiculous budget.

[@shannonsisk]

I hope that 4.8 came to party. Hang in there little guy! 🤘🤘🤘🤘

[@TheBrokenLife]

Did you go down to the yard and get more used anti-freeze to restore the junkyardness?

[@SloppyMechanics]

Strait hose water

[@TheBrokenLife]

@@SloppyMechanics It's not the same if it's not from the dyno sink... :( Any update on that situation?

[@kevinc9006]

@@SloppyMechanics even better ......good and stocked with plenty of minerales to seal and leaks.

[@gilbertfranklin1537]

Dear Matt and Mark, if you don't make the 8 sec run (and since the budget is busted) I want to buy this build cheap and use it as a daily driver. I figure that by strapping on the blanket muffler and setting the idle at 1800 rpm, it would be perfect for going shopping or to the local pub - sort of like "Sloppy Driver Mode". All I ask is that you throw in air conditioning, seat heater, and rear window defogger. Thanks.

[@kevinbowers3917]

Gotta love some Mark! Sounds nice and nasty. Maybe some footage of his Camaro?Cheers,ed

[@daleahrens553]

Always enjoy the vids... Thanks to both you and Mark!! Laughin my ass off as usual to Sloppys comments... "Just chill the fuck out"... quote of the day... thank you sir!!

[@joie0]

"Some of you guys can chill the F out" -Denmah

[@TurbineResearch]

Wondering why it idles so high. Realizes playback speed is at 1.25

[@JAYR-yh5pn]

I wish I could hear it in person But I bet it sounds like terror driving by.

[@blackwellm23]

Cant wait to see this on the road

[@willierepairone5389]

You want to check a cylinder head at home... Lay it on a piece of glass.... Pull out a 4thousants feeler gauge... Run it around the outside edges of the head...

[@Ribbityibzki]

You must be new here.

[@Drivewaybuilt]

I'm quickly coming up on my budget goal, and I don't have the ECU yet... Manuals aren't super cheap to get a good one.

[@kyhillbillys10]

Pretty cool build hope ya hit your goal

[@thatturbotruck]

Looking good. Got my turbo 5.3 sn95 going, I actually started it a little before you got yours and now tons of people say is that an 8f8 clone. Not really but damn close lol

[@dandorris8531]

Yessss she’s alive.

[@TurboV8boi]

"Some of you need to chill the fuck out." Sloppy for Prez 2020

[@gregw515151]

Can you post where your going bc them tracks are both close to me. Wanted to go see the car

[@RobLeftridge]

+1. I live 5 minutes from Cecil would love to check out the sloppiness in person

[@Turbogto_guy]

Yea people. Chill the fuck out. Love this guy!

[@b00st_SS]

Here trying to figure out if I should spray my LS9 head gaskets with copper spray or not, they have 100 miles on them . Can’t hurt I figure

[@Therendonfamilia]

Nice work dudes, love see these updates. Can’t wait to see it make a run. You going to do some 1/8 hits to work the short track out before going for 1/4 passes or just go for gold right away?

[@jasonspeeds1]

Can't wait to see it make a pass!

[@Carbonneutraldrop]

Only references i like better than a sloppy reference is a stern reference. By the way shout out to sloppy in fasterproms video about putting ls intakes on new lt

[@thegrandpumbaa]

Mark and Matt, 2019’s Batman and Robin. Please continue.

[@cmsracing]

Don't forget the radiator overflow hose and tank.

[@SloppyMechanics]

Yep we have it just gotta hook it up

[@grabasandwich]

So wrong but so right! Staying true to your name.

[@TorquePowerVideo]

By all means, take the time to make sure it's safe. Most of the negative comments I've read are from people that clearly don't have your safety in mind and just want to see it go. I think they don't realize how fast it will be and how quickly things can get out of hand at those speeds. So screw those guys and do your thing!

[@compted10]

That's one rowdy Mustang.

[@iamblaineful]

Don’t give a shit if it ever hits the track, just enjoying the build process. ......and Matt, nice job trolling the KZbins by only replacing the one sloppy diaper of a head gasket, ya bastard. LOL 😂

[@mrmatt2525able]

How do you have the mini 3.5 dash plugged in with the big Holley dash too with only one plug on the holly terminator x harness?

[@twiggss4344]

"Some of you guys can chill the fuck out" insta like... lol

[@russellbroadwell]

We're you all not able to do the track rental, or are you holding out on us!? :) Keep up the great work. Living vicariously through you until I sell my car and buy something pre inspection required or waiting three more years to turbo it.

[@MegaFPVFlyer]

Good lord, 15 psi target for a test drive? My brother's miata is running 10psi on a stock 1.8 and it's already too fast for us. Can't even imagine what an LS on 15+lbs feels like.

[@oddballfactor4307]

I always wonder about building the fastest car cheapest way possible, probably somewhat close to this car but I was thinking run on m1, no intercooler or radiator, save money and weight. Obviously a full fledge drag car then. Could terminator x run m1 or is that a totally different ball game?

[@tramsey-kh5gd]

Can you please do a 2019 what to buy turbo stuff? Getting ready to boost my 4.8 and just wanna know what exactly the sloppy stage 2 is don’t want any knock offs same with pac 1218 . Not worried about the gt45 cause it’s literally $150 on eBay lol just the motor stuff

[@jeffgraham48]

Definitely paper headgasket max HP Lmfao!! Awesome Matt as always ✌

[@wayfastwhitey45]

That seat looks like Darth Vader

[@juan_chava4383]

Thanks for the update!!!

[@BoWhiteRacing]

Love it buddy.

[@AutoBikeTruck]

Very Cool Build Man

[@Gettinbentoffroad]

I subscribed as soon as you said were not tryna kill ourselve were just having fun so you guys can chill the fuck out! Lmao 😂 real guy right here btw those seats should have vaders face painted on

[@sr20good36]

Come to atco that’s my home town!

[@theproofgiver007]

What’s the white block to the right of the shifter?

[@SloppyMechanics]

Solid state relay that controls trans brake and bump

[@bigj7807]

What pump are your running in the cell?

[@SloppyMechanics]

Twin 450’s

[@Framlife351]

That gasket was soggy l bet it was blown to the water jacket for quite a while hence the muddy coolant.

[@mikegore9029]

Do you run a open or closed loop system

[@benjamindewitt9151]

You re-used TTY Bolts?

[@trapspotcustoms627]

For years now.....

[@2CabrasLocas]

BOOM! Goes the dynamite!

[@donaldkumler5149]

Just wonder how that first shot of replacing just one head gasket worked out for you? :)

[@SloppyMechanics]

pretty good, i learned alot

[@interceptor0166]

Yes. 👍 🚀

[@raybiderman7147]

why didnt you do both sides

[@israeldouglas5546]

You should put a tear drop exhaust tip

[@dangerousfreedom4965]

Love it👍

[@ryanmcclain7714]

Good thing that gasket failed under boost looks like it blew all the coolant before the engine had a chance to prove that water is not compressible

[@James-hg5tk]

It needs some milk 🥛

[@snikwad003]

I need a M12 ratchet bad

[@Turbogto_guy]

snikwad003 get the non brushless one. The brushless one is so big and heavy that you probably won’t use it as often. I bought the regular one and couldn’t be happier. My buddy has the brushless one and it’s so huge and heavy.

[@mq1991]

@@Turbogto_guy seconded, I bought another non Brushless one in case they discontinue them.

[@snikwad003]

Interesting. We have some M12 brushless and non brushless stuff at work drills, hackzalls and regular construction type impacts and I always grab the brushless I will definitely be comparing the 2

[@uncagedperformance2096]

So this might be a dumb question, but would you reccomend changing the head gaskets before i put my engine in, or say send it with the paper gaskets? Mine is pretty much this car's twin. Thought i would ask your input.

[@99naSvt]

Do you feel like doing the gaskets now or later lol

[@AutoRepairTips]

He has done lots of other cars with paper head gaskets. Probably only failed because of the power level he's trying to push to.

[@austindoud273]

Send it

[@10mmMotorsports]

Sure hope the other side don’t blowout on the big end. That could get very ugly for you.

[@SloppyMechanics]

Did that side already

[@guitargod66]

Fuckin right! Send it!

[@billiebobthemechanic]

Only good mustang is an LS swapped mustang!!!