Small Room & BIG SOUND! Sony 85 inch 4K TV w/ Dolby Atmos Klipsch 7.2.2 Reference Premiere

[@robg915]

When you walked into the attic you could immediately hear how well insulated it was. Gone was the echo of the theater room.

[@tonyblu-ray4375]

Sooo uh you guys ever want to come to Florida. We got nice beaches and houses in need of Dreamedia. Miami think about, Will Smith made a song it. Nice video.

[@fahadalaqeel1990]

The whole system in basically in a cone. There is a dire need for acoustic treatment! Good job as always guys.

[@Zharsergey]

I like the tip for cases where a stud is in the way of the clamps. However this will only work if the speakers have a design like these Klipsch.

[@nirkytime85]

You have the coolest job ever...

[@NickyNicest]

Hope it pays well

[@adamjanowski2650]

Hmmm speakers in wall like this? What about bass reflex? What about isolation that is in walls... ?

[@FinnishArmy]

Some people don't care for that, so they don't pay for the extra labour.

[@elliot5902]

Adam Janowski I agree, shouldn’t of used in wall speakers at least for the fronts

[@betitos11]

isolation? The back of the three fronts are going into an attic, the two surrounds nothing behind them, maybe only for the rear surrounds but not really necessary, I had in-ceiling speakers in my last house and above that was a bedroom, not much sound was heard in there unless it was complete silence and the system was cranked loud.

[@adamjanowski2650]

@@betitos11 isolation / i mean not the isolation to second room, rest of the house. I mean isolation that is required for speakers (like open or close build, dimensions of bass reflex etc. but you have to calculate all dimensions) and if you mount in wall like that alllll that nessesery calculatios are useless. So my point is / crapy sound but nice looking in walls / or normal speakers and good sound. My choice is obvious ;)

[@betitos11]

@@adamjanowski2650 - In wall or in ceiling speakers dont need anything behind them. Might be able to use pollyfil or insulation but they sound fine like that.

[@Dedpol264]

hello friends excellent home theater I greet you from Lima Peru successes

[@subirchatterjee1635]

Day I be richer. I will see these speakers in my room and boom boom bass .. vocals. Detail sounds crystal clear. After watching feels how much $ required and virtually dream 🤣 thanks man for making our day

[@iananthony7255]

Klipsch excellent product. Just love it

[@SSmoothS70]

Not an ideal room, but you made it work! Why not mount the center channel in a horizontal layout instead of vertical? Were the studs an issue?

[@jaycarneygiants]

I have similar Klipsch in walls... they have a 90x90 horn so they can be mounted either way. Its 100% customer preference. My klipsch center is also mounted vertically

[@L3x4Pr0ne]

Yes, this! Great install, but the center drove me absolutely nuts.

[@isaiahfurrow7414]

I was wondering if there was a reason for the vertical center as well... I also have to wonder if in-wall speakers have some way of accounting for no cabinet/enclosure....and if they make odd noise in the adjacent rooms and such.

[@carcaviar9321]

I guess there's 2 studs in the wall that is very important for the tv to hold, otherwise the wall is to weak to hold the weight

[@satnamsatt]

You guys are doing great work.

[@ManrantsonMRA]

Best home theater installers on KZbin

[@Maicowerk]

14:50 Unless you don't have a speaker with removable frame like a Klipsch THX 8000 in wall (which is what I'm looking at doing with but only 1 side).

[@LoganSwish]

This is very similar to what I'm thinking about doing in my new home build! Would you guys service Waco?

[@justinmetcalfe2669]

No banana plugs on the speaker wires? Or is that a customer request extra? Or do you not recommend them?

[@Dreamediaav]

we dont use them as installers. They usually are a good idea though

[@guiguigodro]

Banana plugs only serve as a quick plug-unplug solution. Permanent installs don't need those.

[@djgdogg1860]

I wish I could get a job with u guys!!

[@scottmilloy3299]

Do you have a video of this finished sound?

[@Slyder695]

awesome set up! I noticed insulation in the exteriors walls. Is there no need for insulation in the interior walls around the speakers to match the sound?

[@wrenchingandwheeling1589]

I was thinking the same thing! I added acoustic damping to all my wall cavities on top of the original spray foam.

[@The.Home.Cinema.Engineer]

yikes! sound and layout nightmare but cool that you made it work for them. 4 guys? for a small room installation?

[@ronaldov09]

They might of had a very tight deadline working around other trades?

[@ricardovskiii]

Great job! Want a demo on this one! Love you channel, keep up with the good work :)

[@Mr_Aspiration]

I love this setup it’s perfect for what I wanna do

[@archbold1206]

Man that's a lot of speaker for that room lol. Great work as always. If you all were in Houston I'd get you guys to install my setup Im saving for.

[@JoeMH711]

Same in Houston I need them to come on out !

[@danyalreyaz7503]

@@kevinmontoya7318 not quality, DIY does not always beat professional - also, these guys have made it clear that with him certain high cost products like the 8K e-shift projector can be had for less than retail pricing

[@NickyNicest]

Go big or go home I guess.. if I had the money I’d do the same.

[@glennschmidt8877]

Thank you for that bonus tutorial ! The process to install the speaker into the wall isn't as hard / intimidating as I initially thought

[@Keithtimes]

For the center speaker, couldn't you mount horizontally if you just cut out some of the stud? Assuming non load bearing...

[@brownsrvlifecampground9322]

You made a cool video

[@BLINDCABBY]

Great video and install. Why don’t you use banana plugs in the install?

[@mike.unlimited]

15:46 you can just drill a hole in stud. Electricians and plumbers run holes through a series of studs when running wire or pipe. Especially with the particular hole being next to a door frame wheres theres multiple studs stacked. Good job on the project!

[@vincentbroms667]

No in-wall treatment for the speakers ?

[@Dreamediaav]

We recommend them for the customer. Its up to them to accept the offer. Everyones budget is different

[@JamesCampbellMr]

What treatment would be needed?

[@vincentbroms667]

@@JamesCampbellMr Depends on the wall and speaker. Mostly making sure the volume and dimensions behind the speaker are as good as possible as if it would've been a regular boxed speaker, but also making sure the volume behind the elements are as well damped as they need to.

[@saqui2323]

I want to work on a job like that but idk if I can because I'm 15 almost 16 but really into speakers and I eat to know more about them and maybe even make my own little company like yours

[@jaycarneygiants]

15:01 ... "brother"?? I think this is the first time you mentioned that to us youtube fans!

[@Dreamediaav]

nah. we have been adding it to the install channel lately. Its a brilliant idea though

[@ADCEable]

Love watching your videos even though I have no knowledge of home audio. There just so chill and your style of recording makes it enjoyable. :D

[@Dreamediaav]

Thats cool. Thanks for watching :)

[@richardgourlay5279]

another great video, thanks guys...

[@Dreamediaav]

Thanks Richie

[@fabioperelli1830]

Why center speaker is in vertical?! 😅

[@Noah-or5gr]

i assume its just for the front left and right speakers might do somthing about sound idrk

[@escapethefall1]

probably so it can fit between the studs.

[@bomanndk4805]

So they dont have to cut the studs

[@ErikThaRed]

Haley Joel Osment is installing speakers now?

[@Dreamediaav]

mcv

[@benjaminwallace4626]

I have some old klipsch from the late 90s and they still sound awesome except my right channel tower speaker has a slight rattle from the woofer

[@nicholasmapes]

Do you know if the rattle is from the woofer, or the woofer frame? Sometimes just tightening the woofer frame back onto the cabinet will fix this. If it's an older speaker Sometimes the screws back out a smidge, and that's all it takes.

[@benjaminwallace4626]

@@nicholasmapes Hey wow 2 year old comment I fixed the one that was rattling The glue holding the spider to the speaker basket failed so I lathered 2 party epoxy to re attach the spider and wow no more rattle I took woofer out of cabinet of course but it’s fixed Thx for replying though

[@gerrylopez9060]

Wich speaker is better! Klipsch pro 250 or the Klipsch R 5502

[@kyleb947]

What size screen and sound would you recommend in a 13x13 room?

[@remidurand4807]

Hey ! could you please give us more information on how you managed to mount on the wall the huge (and heavy) Sony 85 inch 4K TV ??? did the wall was reinforced with something special ? did you use special molly screws for plaster wall ???

[@Dreamediaav]

we drill into center studs with 1/2 inch lag bolts. 2 lags minimum but we usually use 4

[@remidurand4807]

@@Dreamediaav ah yes indeed, didn't thought about this !! thanks for the tip !

[@thomasvarghese3123]

What are the difference between the klipsch rp series and the r series??

[@shantaumesh3685]

Super work sar

[@L3x4Pr0ne]

Did you have attic access for the atmos too? How did you get the wires to the ceiling? Fun install! Small and clean!

[@user2144]

Where can we find the follow up video to this project?

[@vbubba801]

As always amazing work and love the videos!

[@Dreamediaav]

Thanks Bubba

[@davidgoussot7553]

nice video guys, i think you should have aligned the 3 front speakers just a bit under the screen, so later they could be able to upgrade to a projector screen...For the left surround speaker why don't you put the screws into the stud so the red hook can grab it ?

[@dmines10]

Can the 250 rpw for center channel be mounted horizontal instead of vertical like in this install?

[@kaiwilliams500]

dmines10 yes, it most definitely can!

[@isaiahfurrow7414]

What AVR unit was used to run this system?

[@53patsfan]

I will never understand how there is no box on these in wall/in ceiling speakers. Isn't the wall cavity going to reverb sound? I have seen houses with in walls that you can hear in other rooms through a chase or other opening. AM I WRONG?

[@thehal991]

53patsfan yes, but the sound is negligible compared to a box system but it’s a sacrifice you make for a clean finish. Also when that sub is booming your your gonna hear it and feel it anyway.

[@SSmoothS70]

Yeah, I agree. When I installed my in ceiling speakers Purchased a box along with them, makes a big difference!

[@jurijuri8363]

Hi!Why central chanell standing vertically?

[@thehal991]

Juri Juri stud maybe?? 😳

[@Dreamediaav]

there is no reason not to have them vertically, but in this case the studs were the issue.

[@jurijuri8363]

Sorry for my english,i from Estonia and russian my mother tongue.

[@itsneight1260]

some rooms of some homes just shouldn't have expensive surround sound in them... this is one of them. Proof yet again that some people have more money than sense.

[@catalinneculai4541]

I was going to say this :))

[@katroijones1946]

How much are the speakers

[@Smthkd]

Why do you mount the center channel vertical vs horizontal?

[@Zeck88522]

I bet because of the studs in the wall

[@MyFamDiary]

Hi. I have 1 question. I have Sony 5.1 receiver. So Dolby Atmos speaker support with this receiver? If so how to install it.

[@Mark2ube]

Krishna rai No. You need an Atmos capable receiver that supports something like 5.1.2, 5.1.4, 7.2.4, etc

[@Thomas99840]

With all In-wall speakers, do you run into significant problems with bleed into the surrounding rooms in the house during playback?

[@rakeshrastogi6390]

Ye sara sistam kitne ka hai mujhe lagbana hai

[@shockjock35]

Love the Wrap on the Van looks awesome. Question does the Fan in the Rack Mount on the back end. I was thinking it would not be useful if it was just blowing on top of the WattBox Surge Protector

[@zackmurawski9819]

What’s the price for this setup minus the tv? Just curious

[@MaxBoostMk7.5]

Likely around $4000.00

[@jasperdany]

I noticed that all the walls are made of wood, the speakers are so powerful, won't the vibrations over time, have an effect on the mainframe of the house ? .... I am new to this, it's just a question.

[@uppadharmai]

How do you run the speaker wire behind the dry wall/ceiling?

[@carminedepaola8018]

What is the size of your room?

[@carlosrc9786]

I loved it. I want to be one in my room, but it's hard to find someone to do that. Saludo Costa rica

[@ranbymonkeys2384]

Why not you?

[@guiguigodro]

Are those LCR speakers or plain center channel used as left and right?

[@louispd6828]

Thanks for explaining everything in simple terms. I just installed the same 85inch sony TV , 2 questions: 1) While watching night time/smoke in the background scenes on cable and netflix I get pixelation within the video...is this the nature of the beast or any tips to mitigate this... 2) I ran heavy duty thick (size of my pinky finger) hdmi cables, they go up the wall, thru the attic and down the wall. It gets super hot inthe attic during summer months, you if this will degrade or affect these cables in the long run..??

[@Dreamediaav]

Look into fiber hdmi cables

[@jamiealite]

Just came across your channel you are the first one I hear say you run an optical cable because of in case a faulty audio signal here I thought I was the only one that does that. A lot of my friends that are in the audio install business never do.

[@richardluna8538]

I am trying to find someone as good as you guys here near Portland Or

[@Dreamediaav]

give us a call

[@richarddegannes2928]

Hello, Any idea when will Klipsch release a new Cornwall IV to the market? Thanks.

[@Dreamediaav]

No hints yet

[@CFoySr]

You guys do excellent work 👌👌👌

[@Dreamediaav]

Thanks buddy

[@ninotizedgaming1920]

nice job! also i never seen those clips. either way, i think people should just get sonos and call it a day. why no sound test?

[@chewyd.4573]

What was the cost of this project?

[@harrison00xXx]

small room for a 85". The small sound system is fitting the room lol Im happy with KEF IQ90 floor standing speakers, 2x IQ30 in parallel as a better matching center speaker than the regular one and other IQ30 as Surround and atmos height speaker in 7.1.2 As TV im still running an old FullHD Panasonic Plasma, best at all :D

[@joseluisruiz3789]

So much Criticism from all the KZbinr Professional Installers. Glad you made the set up work for the customer. Like you said, sometimes you gotta make the best with what you have. Not everyone has a 6K Sq Ft Home with a Dedicated 1600 SQ FT room to dedicate for a Home Theater.

[@Dreamediaav]

You are correct. thanks for being kind. Sifting through all of the negative comments about what people "would do " is exhausting

[@robww5921]

Sweet! Like this video a lot as more like the real world. When you calibrate it could you tell us more about what you do - not just auto calibration but any manual tweaks....I’m guessing this might need some manual tweaks!

[@Slyder327]

guys........one word. Velcro....... pros dont use tie wraps lol. that room is an acustacle nightmare. cant wait go hear final demo.

[@Dreamediaav]

good tip. thanks for the help

[@kmyymk2]

where do you get the in wall mount boxes

[@ulaganath]

Does digital optical can out 7.1 true HD dolby atmos/dts x . Wont it need HDMI arc to out .

[@ld32486]

technically no. it will just use a 5.1 and split the surround channel with the rear or height channel on your receiver. so, yes it would need hdmi arc to get use of the full system.

[@leeabin1280]

Do you think I can do an atmos in a 14x13 master bed?

[@Dreamediaav]

yes you can. call us and we will set you up

[@leeabin1280]

Perfect, will do that when i’m ready. My house is currently in construction.

[@craigsaunders5306]

That roof config is a reflection generator.

[@Silver-hg8mc]

This dude is such a chad

[@Dreamediaav]

Chad is a cool name

[@Silver-hg8mc]

Dreamedia Home Theater k boomer

[@chehau997]

perphase u may try procella audio

[@jhalakrajpoudel759]

How much it may cost for same speaker set up of klipsch with wiring ?

[@ranbymonkeys2384]

To pay for those vehicles...a lot

[@CaseTheCorvetteMan]

Ok, this is now a few of your installs i have watched, and i don't know if it is customer requests for such things, or just poor layout, but i have to ask. WHY are the L+R speakers and the screen SO HIGH up???? That would work fine using the Klipsch with adjustable angle tweeters, unless they like standing up to watch a movie i guess... At least put the L+R upside down to get the tweeter somewhat closer to where it should be.

[@ira4496]

Was there ever a follow up video?

[@dj.excess]

Like how flush those speakers are. Sucks the room is so damn small. Prob wont get enough surround immersion since everything is so close together. Good job guys.

[@harrisonkay575]

How much is a set up like that roughly cost.. besides tv

[@davidcochran2255]

good video guys you did well. but when i was watching it i notice you didn't use banana plugs on the amp and speakers?

[@Dreamediaav]

customers some time move the units and the bananas sometime pop out. They call us because their "speakers arent workin" and its usually that simple. Over the years we have just done physical connections

[@richardkleveringa630]

teufel is the best

[@MrAjw312]

Looks like the attic was larger than the room they chose...

[@rahulyadavBERLIN1327]

Sony 9.2.4 av receiver please tell me

[@chefp2010]

What’s the av rack name

[@Dreamediaav]

strong 18u av rack

[@LiquidSm0ke]

Crazy how video gives no justice how big a 85 inch is in person

[@Dreamediaav]

people on the internet will still say that its small on the video... ahhahah

[@LiquidSm0ke]

Haha awesome job with the install !

[@I_AM_HUGO]

Klipsch to Focal is like Cadillac to Ford Focus.

[@Thezuule1]

No..

[@ranbymonkeys2384]

Seems like you could use a "test" speaker to make sure they sound good before cutting a hole in the wall.

[@leokolev]

The speaker under TV should be horizontal only! Not looking right to me...

[@rossb4247]

why mount the centre speaker upright instead of flat like it should be

[@mrspeeddemon727]

I have an all Klipsch system paired with a Marantz receiver, except the subwoofer. For the sub I have an SVS. Klipsch subs can't touch SVS IMO.

[@Jordan-fr5ne]

I would use vacuum machine while cuting the drywall....

[@Dreamediaav]

Smart move! Using a vacuum while cutting drywall can definitely help keep the dust down.

[@PcandTech]

Part 2?

[@przemeksz8203]

in us houses are made like from paper in my country every house is solid tornado resistant :P you cant even get those speakers and if you do get them there is no way to instal them in concrete wall

[@kmvuniverse]

Do you ship svs products?

[@Dreamediaav]

Not yet. We are still waiting on them to greenlight our account / Hope its soon

[@kmvuniverse]

Dreamedia Home Theater okay

[@Berberien]

why wouldnt the red tabs for the mount just spin 360 degrees? :D

[@guiguigodro]

The tab has a stopper to keep it in place when you turn the screw because the screw is threaded inside the tab. Otherwise it would risk falling down if the screw got loose.

[@mvvihan1412]

Where is sound test???

[@solitudeguard5688]

I love you 😂