Small Wind Turbine Generators to use for Off Grid, from Green Energy Solutions PARTS LIST BELOW

[@JOHNDANIEL1]

The LOW WIND 600 is s.click.aliexpress.com/e/_99l1XF ,makes wind power for almost everyone. Help real invention & discovery with BUY ME A COFFEE at www.buymeacoffee.com/JOHNDANIEL UPDATED Extras ⬇ Full WIND store options s.click.aliexpress.com/e/_AFDRgV OR the HS 500 turbine s.click.aliexpress.com/e/BztCS7I0 3/5/6 blade in 12/24/48 volt From B&C (LOW WIND MODEL s.click.aliexpress.com/e/bE1zQnPw ) 🔋 LIFEPO4 Collection - UNOWIX Defender 100A amzn.to/3QB9nno Power Queen premium amzn.to/3QfOY7T & REDODO 100A Workhorse Battery amzn.to/3dlHT7d DC watt power meters (2 sizes) ebay.us/lIoioF OR 200A amzn.to/3xBHKE0 Vevor Power Supply for setting your booster amzn.to/3JKeMGu ✨OTHER options - GE-500 watt High Output s.click.aliexpress.com/e/Igjt80g 3 or 5 blade, 12,24,48 volt ⬇️ Add the complete L.G. BRANDON SURVIVAL POWER SYSTEM -- 100 Watt Panels (12) ebay.us/Zla5aq , Affordable durable solar controllers pick (2)60A ebay.us/pODwA7 ,Solar Connects amzn.to/2XJOa1M ,Battery cable USA made amzn.to/3h6dsim ,12/2 Above/Underground amzn.to/2XIJolg for safe DC wiring of lights and appliances. Cheap Inverter with proven 5+ year records of quality - 3000 watt ebay.us/YEaTX9 for tool, high amp, fine electronics, and start up use.

[@davefroman4700]

You are in Texas. I guess you could not afford the 2kw model? Because it would definitely work.

[@JOHNDANIEL1]

I'm a redundancy fanatic. 4 small ones assures power, 1 large one is to big a risk to loose in a situation.

[@davefroman4700]

@@JOHNDANIEL1 Yeah ok I get that. Was curious though because the bigger the diameter the more efficient it is.

[@JOHNDANIEL1]

@@davefroman4700 True, but with a extreme cost. Controllers for them are normally 48 volt, building slave batteries for it is $500, adding all the structure to mount it is very costly now with material issues. But, the grouping of 3 to 4 of the 500 to 600 turbines is easy and not needing more than a large wood post if need be! My friends in Nevada bought one. a 2500 watt model, in one ice storm due to its blade area it was destroyed. $3200 gone, and no power. But in the same storm that hit Idaho worse, mine just spun up and de iced themselves, no fails. If one had, then REDUNDANCY rules!

[@davefroman4700]

@@JOHNDANIEL1 Well that is why you want solar and wind. They are counter cyclical.

[@spoton5981]

The way you rag on Brandon, is friggin legendary 😂 wish you were my neighbor, John!

[@JOHNDANIEL1]

Yeah, We need to build us a compound, on a remote island. They got no Homeland Fuzz on them places to call you a terrorist for not liking being labeled one due to your inability to see and call why whackos are crazy.

[@spoton5981]

@@JOHNDANIEL1 I’m down! Let’s build one! We’re gonna need to have each others backs real soon. I need your help on a project I have planned. I’ll be a coffee member soon when I’m ready.

[@SpencerHHO]

I apreciate that you support chinese sellers that are actually trying to do the right thing. I've dealt with a few myself and there is massive difference in quality and service and they are only a little bit more expensive on the face of it. When all is said and done it ends up being cheaper actually getting a product that works as advertised than some cheap junk.

[@JOHNDANIEL1]

Yes, you can't hate on the majority of Chinese. They are victims of a corrupt system like we are also becoming in the rest of the developed world. Our real enemies are the Elite, not each other.

[@closertothetruth9209]

now this is a nice looking and sounding 600w turbine. saved me hunting for turbines for a friend he wants a few of them..

[@007slyman]

Gray mate, Simon(Aussie) here from down under. I luv your videos mate just plain old good knowledge, thanks so much for all your knowledge and work that goes into Sharing this with your subscribers. I'm about to purchase two of these wind turbines from green energy, Ive been trying to set up my home power generation on my 50acre property down South west Victoria for a few years now.But the global energy situation has now really made me get serious...I've had a lot of other property improvements projects going on. I have downloaded your earlier vids on all your power generation that you posted from your old place in Idaho if I remember? I've been subscribed to your channel for years now. Would be frigging awesome if you could post a schematic (I do remember you white board diagram) with wiring specs and equipment, rectifiers, displays, load shedding through to 12v battery storage. That's where I'm at about to purchase your wind system. I just got my hands on 8 of 225ah , 12v. Lead acid deep cycle, not a big battery storage but a start.. + 3.5kW of solar panels and SMA inverter. So I,m making progress. My family use on average 10kW of 240volt power a day, so we a very low users and conscious of power consumption in the home and around the sheds. If you could run a video on how to build the system start to finish that would just be superb, would really be awesome. I have a basic idea of how to build the system by pricing together a few of you videos. Hurricane wind power won't ship to Australia, although that may have changed I haven't been on his site for a while. Keep safe and warm (it's the coldest start to winter in sth Aust Melbourne region in 30years I'm burning wood in the house firebox like no tomorrow, but zero heating costs, except chainsaw fuel and sharpening chains! ) And keep doing what you do....we luv your stuff here in Aussie. Cheers mate Simon

[@JOHNDANIEL1]

Appreciate the response. My overall goal when I do a video is to thump the noses of these elite bastards who are making our world miserable mess. Mostly the politicians and their hacks who believe that we are their subjects. At some point the people who shovel their coal will be digging their graves. But until then to keep us all alive we need energy, food production and growth, and to be a step ahead of these assholes. Not sure a total cost but since the 2019 fun bug I have almost stopped completely getting the controllers that I have, I think I've got about 15 left but I'm working with green energy to knock off the design as an addition to the turbines since the quality they have has the effort that people need put into them.

[@margarita8442]

check out will prowse -- go for 48 volt system

[@rgnewlife6622]

Thank you again very very much for your honesty and bravery and helping us out here

[@harrypearson3143]

Hi John I am interested in setting up a few turbines onto of some industrial units, you have recommended Green energy solutions. Do you have any experience with the larder 2000w Units?

[@JoniK1]

Hi! Great videos! Which wind turbine you suggest for me with 24V system? Average wind speed is 4-6km/h depending on season. Should I buy 48V model instead of 24V because of rather low wind speed? I have 4000W solar system but it doesn't help much now because of snow. Greetings from Finland!

[@JOHNDANIEL1]

Get the 48 volt model 3 blade low wind on the link, with a 24 volt capable MPPT all in one for 1200 watt max wind power.

[@somemore9784]

Cheers John

[@nosaltiesandrooshere7488]

Thanks John - danke dir!

[@baneverything5580]

Here in central Louisiana we rarely get enough wind to use any sort of wind turbine unless you can get them over 80 feet up. After hurricanes the wind just stops for several days. But it would be nice to have something up as high as I could get it to charge my large battery on rare windy days/nights. I`d get one for the hell of it if I had a lot of cash.

[@patrickmclaughlin6013]

Thanks John.

[@steveblack276]

Does GES have a graph showing power out to wind speed for their models?

[@JOHNDANIEL1]

They had me generate one but I am not sure that Alibaba/alliexpress (the CCP) has approved it for posting.

[@jameskim62]

VERY NICE WIND TURBINE !!!!!!

[@JOHNDANIEL1]

Finally getting back on track I need 50 lb of those spherical ceramic crystals

[@daleval2182]

I live in Nova Scotia, wind is near constant, and gets down right stupid at time, would this be suitable, what might you suggest in this case?

[@JOHNDANIEL1]

Depends on you needs, and location. A extremely high wind area like yours may need a furling tail design. But those are a bit more money.

[@daleval2182]

@@JOHNDANIEL1 thanks, ill seek furling tail, let me know any opportunities, my goal is be at least 2000 watt, 1 Kw reserve, combined solar, wind have panels online now, want to put wind tp work, need more and better batteries, like most guys want, and the expensive part of a system

[@JOHNDANIEL1]

Get Rolls Surrette. Quality from Canada. In your location LiFePO4 will suffer bad from cold.

[@daleval2182]

@@JOHNDANIEL1 i shopped those Rolls today, never knew about them, made right here im Camada, very helpful advice,they have a good reputation, and i found a few local deals for them Thank you sir, now a new subscriber 👍

[@JOHNDANIEL1]

@@daleval2182 Build to Do well, Prepare for more to come. Be sure to stock 1 gallon of Distilled water for every 4 batteries in heavy use, per year of service ( 8 gallons per 4 batteries for 8 years) or get you a solar distillation set up to stay full power.

[@Kettenhund75]

John, didn't see the install video for this. I have a full solar setup that I pieced together and built, but my hybrid grid tied system doesn't have inputs for wind. Can I run two separate systems tied to the same battery bank? They both monitor battery voltage and stop feeding the bank power when it gets to the right voltage, right? Theoretically it should work...right? I am also in Texas (NE). Whereabouts are you?

[@JOHNDANIEL1]

I have numerous videos, older ones, going back long time. Since 2010. I will be doing a step by step newer video, back then it was 600 line quality vids. And We are in the center of Texas Hill Country.

[@Jj-bq9of]

I have to test my How many ac vol should there be on a 600w 12vol wind turbine from green A shop, with drill? Should I set my watt meter to 200 ac? Thanks for your help,,

[@JOHNDANIEL1]

Using a 7+ amp drill motor with 450 RPM or higher you should see 45 to 55 volts AC on the legs from the turbine. If you do not, you may have a slip ring issue with lacquer coating over spray causing loss of power in it. Normally it will work off the brushes on the slip ring, but you can pull the face off the turbine and access them to clean them.

[@Jj-bq9of]

@@JOHNDANIEL1 Thank you very much, what should I put my wattmeter on? The mill is brand new but the postman may have dropped it on the floor, hehe I will keep you updated

[@Jj-bq9of]

@@JOHNDANIEL1 it is at 43/47 without resistance nice ty..if I put it on battery so there is resistance, what should the number be??

[@davidpotter9462]

I bought one. Put it up yesterday. Spins like hell, makes 16-17 volts. Don't know what I can do with it, since I have a 24 volts battery bank. Nice controller.

[@JOHNDANIEL1]

What's the wind speeds its running at, what's open voltage on the 3 legs in that wind speed.

[@davidpotter9462]

I posted a short video of it running. Looks like it's making a volt per mile an hour of wind. It hit 29 for a second in a big gust. It stays around 18-21 volts mostly. I've had the voltmeter on it for awhile.

[@JOHNDANIEL1]

@@davidpotter9462Do you have a wind gauge in the air watching the actual speeds. A 24 volt model after brake in will hit 30+ volts at 12 mph in clean air with no obstruction nearby.

[@davidpotter9462]

The wind is going to be 15-30 tomorrow they say. I live on a hill just South of the top. It'll be pushing 35 tomorrow, here. That's a little high for low wind. I'm going to have to have this thing rewound , or do it myself. My order was kind be of messed up anyways. The holes in the crush plate didn't line up, so I had to slot them, use washers, longer bolts, etc. When I saw that, I didn't expect much else to be right either. So looks like I have a 12 volts one. I guess the Chiwanese are having trouble with the abacus again...no telling what it'll look like if I try to rewind it. But it's no good like it is. I've got a 200 amp rectifier coming, so I'll hook up a pwm controller, and see how many watts it's making. I guess the short video uploaded showing the blades turning. The blades are turning but appear to stop on the phone. Whatever RPM that is. They were cranking pretty good though. That's when the voltage went up over 25 for a few moments. Pretty sure this is a 12 volts one..I guess the little video uploaded

[@JOHNDANIEL1]

@@davidpotter9462 Send me the link to exactly what you bought.

[@ajeesh3485]

How to find which type of battery is supported by the charge controller?

[@JOHNDANIEL1]

Wind turbines are not friendly to Lithium, but running them into some slave batteries, Marine style Lead Acid, then using a DC to DC charger to put that power into LiFePO4 in real time is my method.

[@thechiefsway2618]

How good is that Mars Rock all in 1 controller. Have you had a good experience with it.

[@JOHNDANIEL1]

Yes, I have installed them before but you need to make sure that you do not try to run it to its maximum ratings. If it's 800 w at 12 volt wind capable then put a 500 watt turbine on it, 600 at the most and if it says 600 solar don't put over 400 on it at the same time with the Wind. By doing it that way you'll get every result you need out of it. Down below the video I put a model that you can get for a better price but has a little better components in it though it says all in one wind turbine look way down in the text below the video.

[@JOHNDANIEL1]

COMPLETE ALL IN ONE CONTROLLER FOR TURBINES - (pick the Wind1500+Solar1500 12/24volt to get real 750wind@12/24volt) s.click.aliexpress.com/e/_AsIplb

[@thechiefsway2618]

@@JOHNDANIEL1 Thanks again for the advice.

[@chriscansdale6389]

John Im thinking of adding a turbine to my system as well as the solar that is arriving soon. Im on elevated ground compared to most around here, but have a lot of trees close by. Being an Australian forest near the coast, its not very dense and we still get decent winds blowing through like now. I can really only get to around 20-30ft off the ground by mounting on the roof of my shed before attracting the attention of the authorities (who wouldnt allow it). Should I be looking at a 5 blade turbine considering my conditions? I am considering a 24v for my 12v bank, but as i had to have a 24v and a 12v bank for the solar, I could connect to either one once real world results are known.

[@JOHNDANIEL1]

Low and dirty winds are a hard call on what to use, but you on the right track. With the world in full scale deterioration right now it would be a wise decision for a lot of people to buy one and put it aside or install it in a hidden spot. At some point any form of energy that you can create put you ahead of all the rest of the zombies out there that'll be dependent on the grubberment morons for their next serving of rice.

[@chriscansdale6389]

@@JOHNDANIEL1 thanks, is there any real difference between the one you've featured here as a 'low wind' model as a 3 blade compared to others on their site with other blade options? Not fussed which of either 500/600w, just whichever will do the better job blade wise..

[@JOHNDANIEL1]

The style of blades it uses are just a little bit heavier to maintain torque and curve to accept the wind with an airfoil effect to keep it consistent that's what you'll need when you have low winds instead of straight on high winds which works great for the sword style blades.

[@thomastoft1758]

Hi John The all complete in one, you have in the part list below, is that good to start With to the 600watt Wind turbine Wind1500W Solar1000W,With WiFi,Auto12V 24V 48V

[@JOHNDANIEL1]

Yes, if your getting the GREEN ENERGY or B&C 600 then that model is best suited. The 600 can peak over 1000 watts in a storm, not recommended to want that outcome but that all in one can beat handle such events.

[@thomastoft1758]

@@JOHNDANIEL1 okay Thank you John, im going to get the 600watt 48volt from G&E

[@JOHNDANIEL1]

@@thomastoft1758 Good plan. We need to share the videos, show more how to get some form of energy and be ready for some real bad dark ages potential coming to the world from the Elite who want to take it to holocausts level for their "great" plans to put us in serfdom.

[@thomastoft1758]

@@JOHNDANIEL1 yes for sure, the Dark Ages Will come…. when i get my Wind turbine i Will make some video how i have install and share it. What gages of wire do you think i need from the turbine and 50meter to my work shop. 48volt / 600watt = 12.5amp AWG 4 ?

[@JOHNDANIEL1]

48 volt will be fine with 8 awg being it is 3 phase and 48 volt. Turbine output unloaded alternating voltage will be over 100 volts. It will stay down to 60 with the controllers or batteries. Your just past the 10 Awg distance of 40 meters so you can run 30 meters of 8 awg from battery area out, install a disconnect service, then use (10/3) 10 awg up the pole to the turbine. With 48 volt its low amps, high volts. A 24 volt turbine would require 8 awg all the way, a 12 volt would barely be ok with 6 awg that distance.

[@daveryan960]

Hi john I bought the 500 watt turbine 24 volt I have a marsrock hybrid controler I have a resister that I bought with the turbine should I install the resister and where should I put it or is there any need to install it thanks john your videos are helping me

[@JOHNDANIEL1]

Yes, the resistor is to catch and eliminate excess power once batteries are full that the turbine will make that can't be put in batteries.

[@daveryan960]

@@JOHNDANIEL1 so do the red and black wires on the resister go to the hybrid controler

[@JOHNDANIEL1]

There will be a dual terminal marked LOAD, BURN, BRAKE or DIVERSION ( the chinese still are confused about this) you will connect wires from it there. Polarity on a resistor means nothing unless its a polarized variable resistor. The others show SOLAR-WIND-LOAD also on them but then if you have the right one it will show a pic of a resistor. Check the manual, connect the resistor and it will just do nothing unless you have crazy wind or fully charged battery then it will act only as needed to keep volts below 30/above 27 in a 24 volt system.

[@daveryan960]

@@JOHNDANIEL1 thanks john marsrock got back to me saying there unit has this function already built into it so theres no need for resister I hope that's true. and you saved me a few quid on the 16 gauge extenion cord I will use it when conecting from the turbine to the controler and thanks for sharing your knowledge God bless

[@JOHNDANIEL1]

@@daveryan960 ok, I wasn't sure which model of wind turbine controller you were dealing with.

[@hafeexius]

I can't be the only one who laughed when you mentioned the monkey in Missouri 😂

[@donaldsteele6276]

John I have a question . could I hook up a 48v 800 watt turbine to a rectifier and then into a EPEVER 200V 100 AMP MPPT controller then to a 12v 1410 ah deep cycle battery bank that way ? and still use a solid state relay and dump control board to burn off excess power that way ? does anyone hook them up this way? just wondering if you have ?

[@JOHNDANIEL1]

Not recommended. But if you do a little studying on slave batteries you can always do when I do in that case we installed a 2000 watt 96 volt turbine and put it into 12 volt batteries that were wired to 96 volts and from there we used a midnight classic to feed the 96 volts through the solar controller to a 12 volt battery Bank.

[@donaldsteele6276]

@@JOHNDANIEL1 how do you wire a 24v 600 watt turbine to charge a 12v bank?

[@chriscansdale6389]

@@donaldsteele6276 from what I've learnt from John in past videos, its not the wiring... As the 24v spins up in low wind it reaches the voltage needed for 12v battery charging sooner than a 12v turbine would (in low wind the 12v might not ever get high enough to charge). Go back through his videos, there a good one explaining this from 2 yrs ago. Runs for 14:43 . "Micro wind turbine generators low wind answers and options". In low wind a 24 v may not get to charging speed for a 24v bank, so you use a 48v turbine and so on. If the wind is strong enough, you match the turbine voltage to battery bank voltage. Its just a way of getting some power from the wind you have rather than a staring at a 12v turbine spinning but doing nothing for your batteries..

[@donaldsteele6276]

@@chriscansdale6389 that makes sense . Some times I get very high winds 40 to 60 mph gust or dirty wind and often I get 10 to 20 mph good winds . My turbine is a 3 phase 500 watt 12v B creations . It's wired to one of John's designed boxes with the rectifier, solid state relay and dump control board ,3 100 watt 3 ohm resisters in parallel. It's wired to a 12v 1410 ah deep cycle bank . 12 6v crown red top 6v 235 Ah batteries ,4/0 cable and lugs for ties and power in copper bus bars and power out copper bus bars both wired with 4/0 cables. I would like to increase my power enough to really push a charge on the battery bank. I use this unit offgrid and tow behind my RV has wind and solar. 1200 watt solar array with solar trackers and a 600 watt suitcase ground unit ,500 watt 3 phase turbine . I made a video showing what I power with it and my DIY trailer was made from scrap I had laying around . Turned out real good . I even connect it into a ATS on my home for green energy to run deep freezers and fridges and AC units and space heater in winter . I will post a video to show you .

[@donaldsteele6276]

@@chriscansdale6389 kzbin.info/www/bejne/pZ_cYX1uYs5pjJI

[@Jj-bq9of]

I just bought the turbine, it gave 35w/ 9w in 9 meters of wind, can it give 400w constantly or is it an average over time

[@JOHNDANIEL1]

This is a 500 watt model I show from GES. Not sure if you got a Green Energy 500 or a similar looking one from elsewhere I can say the 500, It produces more than claimed. But, depending on voltage chosen, source bought from, how its located in clear constant air, and what controller or wiring you used is related to its ability. Models sold by other sellers do not produce claimed wattage since they sell cheapened components. However, a real one will have a break in period, to get the alignment of the flux in the magnets and will make over 400 watts.

[@Jj-bq9of]

@@JOHNDANIEL1 can I connect a watt meter together with the Charge Controller on + and = on the Metal Case Bridge the setup looks easier to me on this video but what about dump lord''?hi sorry

[@JOHNDANIEL1]

You can connect a watt meter, be sure to connect to battery first ( LOAD ) then to the incoming power ( source ) where ever that may be in your layout.

[@offgridstruggles7504]

how do i wire a wind turbine into a Victron solar system? Would I run a seprate controller and then straight to the battery and just use the burn off for excess?

[@JOHNDANIEL1]

Yes. You just set your controllers to keep the wind turbine divert voltage just a little bit below the solar bulk voltage set by your solar controllers so that they don't interfere with each other.

[@diogomartins9101]

Hey John, my rectifier is making a buzzing noise only when power is passing through it, the buzzing noise will increase as power increases. Have you ever experience this? I think the buzzing noise means that it´s not working properly. Give me your thoughts. Cheers

[@JOHNDANIEL1]

2 things, a contact or terminal is not getting perfect connection OR You could have a diode in it that is going bad, making the AC voltage cycles produce a vibration. Replace it asap.

[@diogomartins9101]

@@JOHNDANIEL1 Thanks brother...

[@diogomartins9101]

@@JOHNDANIEL1 Hey John, I just replaced for a new rectifier and is making the same buzzing noise. Here is a video showing it. kzbin.info/www/bejne/a3ObhmeKq7V2paM Could it be a problem within the generator?

[@JOHNDANIEL1]

Why do you have so many wires going into the input on that rectifier? I have never done that, so I am curious.

[@diogomartins9101]

@@JOHNDANIEL1 it's the 3 resistors for braking, 3 ssr are being used to brake, 1 for each phase. My braking system is not on the DC side, it is in the AC side. Can you hear the buzzing noise?

[@Jj-bq9of]

My 600w from green E-solutions came up 50/ 60/80w on 21/ 22/24 miles wind is that ok?? , I have a mttp hybrid controller, have tried a 200A High Precision Power Analyzer Watt Meter. With the same result, but maybe this is very normal? , I have tested the amp, they are the same on all 3 phases

[@JOHNDANIEL1]

Thats not normal, in those winds if its a 12 volt and the battery is 12 volt or lower then it will hit over 400 watts no issue. But if you battery bank is already high voltage then it can give those results.

[@crazeelaydee3496]

thanks for the great info no need for fake stuff ... I'd like to see some more with your kids in them.

[@JOHNDANIEL1]

Kids have sorta moved on to more important things, social media, movies and sleeping 😌

[@scubahealer]

Is it best to ship from Poland or CN? How do I get the clamp option instead of the welded one.

[@JOHNDANIEL1]

When you go down to the link and click on it and it brings you to the turbine look above it where it says green energy solutions up in that box around their name it'll be contact now, contact them with a message requesting hoop style mount for this turbine.

[@thomastoft1758]

Happy New Year John i hope all is good over there, I Got my 600watt Wind turbine up☺️ i would like to send you picture of my set up where Can i do that? Right now im waiting for my First 12 volt 302Ah battery but how Big 12/240 volt inverter do i need? I want to test to a 1000watt heat element.

[@JOHNDANIEL1]

Excellent. For 12volt 240 ac Get a SUNGOLD POWER Inverter, search that area, a.co/dnSm8JX SunGold

[@thomastoft1758]

@@JOHNDANIEL1 Can the Inverter get to Big if the battery pack of Ah is not that Big yet? Like i only have 302ah battery for now but planning to get it bigger

[@JOHNDANIEL1]

@@thomastoft1758 While your able to even order things, get everything you can to the size you plan. Reason is simple, bad is on the horizon, don't be caught with a missing part of your difficult to find infrastructure on your build. Batteries can be hybrid or even mixed and at worse made. But CHINA ONLY items may be soon on the impossible to get list as Covid is raging now with 20 mutated versions coming our way with a death rate 4X the original. No much good can arise form that.

[@thomastoft1758]

@@JOHNDANIEL1 i Will forsure do that😊 to day we had some really good Wind 15meter pr sec but my Wind Solar Hybrid Charge Controller with Equalizer 1500watt for Wind and 1500watt for solar burned out and smoke was coming put from it 🤬 What Can i use in-sted of i need something that Can hold and work

[@thomastoft1758]

@@JOHNDANIEL1 i talk to the supplier for the hybride controller way it Got burn Dear Sir, as for the controller you mentioned earlier, it doesn't control the strong wind. This is not because of the controller, but the problem of your wind turbine. The starting voltage of your wind turbine will probably be a certain value between 40-48V, which has exceeded the voltage of your connected battery several times. Rita

[@chuckmac6541]

Have you ever seen a Toyota Chinook door locks and how can we get pictures of it to send to you

[@JOHNDANIEL1]

No

[@chuckmac6541]

Thank you Can I get you an email address so I can send you the picture of the lock

[@JOHNDANIEL1]

[e-mail]

[@SrStew]

John, you have a lot of videos and links. In your experience what's the best bang for your buck these days (2024). Thanks!

[@jimkingman1299]

Hi John. I was looking to install a wind turbine at my cabin to help with power. I have 1200 watt solar charging a 430ah battery bank at 24 volt. I was wondering what size turbine you would recommend and a parts list of what I would need to complete system.

[@JOHNDANIEL1]

Exact best turbine has to based on location, and wind averages. Normally for such a build on a battery that size I would say a basic 500 Low Wind model, 24 volt with a build related all in one controller. You can more elaborate and send me details to the shop email, [e-mail]

[@qqqqq11111qqqqq]

Is there a way to get this to charge a ECEOFLOW DELTA 3000

[@JOHNDANIEL1]

Yes, using a Mppt controller like a All IN ONE wind and sun controller s.click.aliexpress.com/e/_DczYCej use the Wind800W Solar800W with LiFePO4 settings. These should work fine with it, you put the wind power into the DC port, not the solar input. And use a 5 blade 300 or 400 watt so you don't blow up that power station s.click.aliexpress.com/e/_DmZLxoj . Get the ones with tail up, not down. You will need 1.5" schedule 40 to mount it.

[@petereckerwall9423]

Hi and thank you for your videos! Im thinking about ordering a GE 2kw windgenerator for on gried purpuse and a wonder if you have any recomendations for what inverter works the best. Its 240 volt or 400 volt here, and i prefer quality inverter because quality is newer expensive. Thanks again! / Peter ❤️🇸🇪

[@JOHNDANIEL1]

Send me some details of what you're trying to achieve with it and I can probably aim you in the best area

[@JOHNDANIEL1]

When you go to the link for GE Solutions on Aliexpress, look on the upper part of the page where the store name and rating is, hover on it with your pointer, it will show CONTACT store, click on it, send her a message /chat that you need a Grid tie for your voltage and that turbine, stay with 240, and tell her you were referred by JOHN DANIEL and want a 5% full package discount. I have gotten to be very good friends with her and her 4 partners that work their butts off to special order the parts theirs are made of. Few even would put the heavy windings and slip rings in, they do.

[@steveblack276]

I think I got a dud! It acts like the brake is on...barely turning in a 20 to 30 mph wind. With the three phase wires as "1" "2" "3" I see ac voltage between 2 & 3 and 1 & 3 but not between 1 & 2. Not sure how the coils are wired internally. Have you any ideas??

[@JOHNDANIEL1]

Is it connected to a controller in those winds? What size battery bank?

[@steveblack276]

@@JOHNDANIEL1 I lashed it up like your drawing (no controller). i even got a knife switch like yours. :) Out of the rectifier and strait into a bank of 3 24 volt lithium 100 ah batts. We had a good wind today (first since i put it up) and it was acting like the braking resistors were engaged so i disconnected everything so that the mill should really take off but i just barely turned.

[@JOHNDANIEL1]

If you can go up to it, check to see if 2 wires are touching anywhere from the turbine to the switch. This sounds like a insulation failure in the wiring somewhere or 2 wires joined that should be separate.

[@JOHNDANIEL1]

Remove wires from switch or check to make sure non got crossed on the screws or metal tabs in that switch. also.

[@steveblack276]

@@JOHNDANIEL1 Kinda thought that something was shorted. Hopefully it is the wire and not the mill. Thanks for the sanity check!

[@donaldsteele6276]

a 24v would be better for a large 12v bank in low wind area ?

[@JOHNDANIEL1]

Yes, size it for 60 to 70% expectations of what your after in 12 volt. A 24 volt 600 would give the results of a 450 watt 12 volt system

[@donaldsteele6276]

@@JOHNDANIEL1 what size would you recommend for a 12v 1410 ah bank that's 24v ?

[@JOHNDANIEL1]

800 watt 3 blade low wind style blades with 24 volt PMA.

[@familylife153]

Can you put kt blades on that one or have you

[@JOHNDANIEL1]

Yes, with a modified Thermodyne hub. But not to exceed circumference of 55" due to how fast the KT BLADES will spin.

[@familylife153]

@@JOHNDANIEL1 thank you good videos

[@dennishively5994]

Glad to see new videos

[@diogomartins9101]

John, what is the best way to connect a copper wire with an aluminium wire? I heard that both materials do not work well together, it starts a chemical reaction, corrosion starts to build up on the connection of the 2 wires, which leads to power loss. My turbine has aluminium wire, while I have copper wire as distribution infra structure. Tell me your thoughts. Cheers

[@JOHNDANIEL1]

If you have a Green Energy or B&C Wind brand you do not have Aluminum wire in them, you have tin impregnated marine grade copper. Those look like aluminum, they are full strand tinned. 76% copper/24% pure component tin. But if you have a SMRAAD, Mars Rock or Vevor you could have aluminum wire. The best way is a full mechanical connection, using dielectric grease on both wire types. Follow instructions and install these inline, amzn.to/3TmAy7b ( 6 to 8 AWG ) or amzn.to/3Sw6IME ( 10 to 12 AWG ) on them with a coating of dielectric grease amzn.to/3VPq1TF on the wire tips as you install. It will prevent electrolysis on the connections for any outdoor or corrosion prone materials.

[@diogomartins9101]

@@JOHNDANIEL1 I have the same model GE-600W that you show on this video, only difference is that it's 48v. My windings are showing a resistance between 0.4 and 0.8 ohm, it's jumping around, it does not settle. I'm not measuring at the 3 cables that come from the generator, but on the extension, so I don't know if the issue is in the turbine or in the extension cable... Tomorrow I'll check the resistance on the cables that come from the generator. How can you tell that, the wire on the generator is not aluminum?

[@JOHNDANIEL1]

@@diogomartins9101 Scrape the wire with a razor, look close at the result.

[@diogomartins9101]

@@JOHNDANIEL1 Thanks for the tips, brother...

[@diogomartins9101]

@@JOHNDANIEL1 hey John, I can't get a resistance reading on the coils, it goes from 0 to 500 ohms randomly, always bouncing around, it never settles. It also fails randomly the continuaty test with a multimeter. What could it be?

[@timdowns4629]

My battery bank is 48V. Is there a turbine that would work with my 48v system. Also is it hard to combine solar and wind? Thanks for all the great videos. Welcome to Texae friend

[@JOHNDANIEL1]

They make 48 volt models. On that link below there is a 48 volt option. And much further down in my link list is a 1500/1500 all in one controller that's what your looking for.

[@donaldsteele6276]

do you know the best way to wire a higher voltage turbine to a 12v bank for more charging power ?

[@JOHNDANIEL1]

Yes, add 5 farad capacitors after rectifier, in continuous drop to battery bank. And be sure they are 50 volt capable. Tap between capacitor and battery for diversion load.

[@sundancer442]

Do they offer this unit with a clamp mounting option ? I'd happily buy one !

[@user-mt4zr5kp7h]

Mine did. I went with the welded flange, but there was a clamp option as well at the time I bought it.

[@chriscansdale6389]

Yes they do. I asked them today

[@JOHNDANIEL1]

Yes, and from another customer that I didn't install for she bought two and hers was for socket size 50mm/1.5" schedule 40 mount. 1-15/16 ID.

[@robertharrison2144]

Curious if you've heard of windturbineusa. They say they have a "tilt up" turbine that is 2400 watts. They are out of CA and claim to have a patent pending on there latest turbine. Have you heard of them or seen their turbines?

[@JOHNDANIEL1]

Those are Thermodyne. Good practical stuff

[@beaushirley4668]

How do I order from there? I cannot seem to get the transaction to go through after having bank authorize it.

[@JOHNDANIEL1]

If you are using a Ad Blocker that blocks cookies or tracking, it will cause a delay in your actions or block them. The buy button is connected just like many sites to a pop up which is really just a "order complete" link. Aliexpress has no adware, but some blockers will screw up your purchase. So, check back, see if it is pending, make sure you allow aliexpress to send you notifications and no ad block then your OK. It is using a European based system, real strict on verifying real actions.

[@beaushirley4668]

@@JOHNDANIEL1 finally got it to through. I think it took a minute for the bank to sync the approval after it was declined. Super excited to start playing with this one. Not sure if my math is right but I think it would be safe to say 100 hours @ 50% output would yield greater than 2,500KWh?

[@JOHNDANIEL1]

@@beaushirley4668 250 watts per hour when wind is up, 4hrs x 250 = 1 kw.

[@beaushirley4668]

@@JOHNDANIEL1 mine showed up today.

[@HiVizCamo]

What's the per hour bird kill rate on this model?

[@JOHNDANIEL1]

About 0.0001% of the kill rate of the wind turbines in California.

[@diogomartins9101]

Way lower than the birth rate, that's for sure... Stupid ass question...

[@SquarebodyTruckCamper]

"Yang Zong buys this case, and he takes big DUMP in it and he sells it to ya." -John Daniel 🤣

[@islaguy100]

you just got my subscription with the Brandon comment! fjb

[@Cjnchef]

That is the best way to beat the algos!! Claver

[@stephaneverreault4255]

I will wait for the power tests, I had the 500 watt 24 volt from G&E brought in for a 12 volt system, with a 600 watt mppt 12 volt hybrid controller or with a diode bridge, with a windstorm with peak winds of 140 km/h (90mp/h) I never exceeded 4 ah or sixty watts Most of the time with 20 to 40 mph winds the wind turbine does not exceed 1 ah or 15 watts regardless if my battery bank is at 50% or 100%, the only times I have seen the wind turbine have need the dumpload is when my solar panels have filled my batteries, my next wind turbine will be a 12 volt but I don't know yet if it will be a G&E, I can't wait to see the power test of this one.

[@JOHNDANIEL1]

Your getting a ton of wind why not the 12 volt? Seem you need to do some test. Send me a email with everything in detail and pics I'll see if I can help figure it out. [e-mail]

[@sherlockhoax9338]

How noisy is it ?

[@JOHNDANIEL1]

You don't hear it much till winds get higher than 20-25 mph. By that point the noise of the wind and the turbine track about the same with the turbine being about 20% louder than the wind.

[@sherlockhoax9338]

@@JOHNDANIEL1 Thanks. I'm looking for one to trickle charge my solar battery pack in the winter. Will this work ?

[@JOHNDANIEL1]

Yes, by a huge amount so be sure you have as much as 400 amp hour. And I put the best all in one wind and solar controller in the parts list below the videos, they did what I asked and put IRC 7095 in them with 200a solid state relay redirectors.

[@sherlockhoax9338]

@@JOHNDANIEL1 What about that vertical " lantern" wind turbine, will that work ?

[@JOHNDANIEL1]

@@sherlockhoax9338 Take a pass on that unless you get the Axial Generator on it. Those you see with 10,000% fraud claims are all exactly that., Made in Vietnam, hocked through Hong Kong. We had a actual heavy wound model they sent as bait to us for the cost of shipping to check it out. It worked making about 35% its 450 watt claim. Since I expected that knowing how a VAWT uses air, I also thought there was a trick, and it was. All the rest they sold would be 3 lbs lighter, so I reamed their asses and told everyone if you want a quiet turbine, get a low wind HAWT model!

[@sharyncomstock7066]

Low battery bank prevents wind turbines from starting up.( Brake effect). How is that prevented?? Happens to many of us.

[@JOHNDANIEL1]

If your battery bank is not too big, pull one wire off from the rectifier and allow it to spin up and touch the wire back on and off to get the current started.

[@normanenglish]

Hi John I enjoyed your video and I have been emailing you from Scotland UK and you have been very helpful. Question for you: Is the Wind Turbine in your video available in the UK and if so which company supplies them? If not where you purchased yours from will they ship to uk if so what price is the turbine plus what make is it and shipping cost approx. It looks like a substantial piece of kit and thanks for producing the video. Thanks Norman English You can reply to my email address if it is easier.

[@JOHNDANIEL1]

Yes, the model in the link is also in stock usually through their Spain and Poland Warehouses. Be sure to get a good dual use solar and wind controller with 800w wind and 600w solar capable. Run only 300 to 400 solar max in it with a 500 to 600 turbine and it'll never fail.

[@normanenglish]

John I must be having a bad morning could not et to a link so could you please supply me with supply info and make of turbine Thanks Norman

[@satellitetvIreland]

@@normanenglish I bought the same turbines from Carbonfreeheat uk

[@normanenglish]

@@satellitetvIreland Thanks I will look into it. 👍

[@JOHNDANIEL1]

The turbine is manufactured by Wuxi. A machine shop tooling manufacturer that's been around since 1998. You can go direct to green energy to their landing page, second link under video contact her, Yue Chen, and tell her you seek best options for getting one without the hassle of your grubberment thugs blocking access.

[@jdell6250]

Wind Sun diversion Control OPC Module is always out of stock 😢

[@solarandwindinsouthtexasda1473]

I'm still waiting on the hurricane vector

[@JOHNDANIEL1]

Yep, need 2 inch pipe, 21+8 feet for a 25 foot mount. It's over $260 now if you can find it.

[@solarandwindinsouthtexasda1473]

@@JOHNDANIEL1 i got 3 pipe for a porch that i built las weekend 2 7/8 35 feet for $95 dollars in the Rio grand valley

[@solarandwindinsouthtexasda1473]

@@JOHNDANIEL1 oil drilling pipe

[@JOHNDANIEL1]

@@solarandwindinsouthtexasda1473 Everything that is left of that material is down to 30% wall. Already spent $80 on gas driving to multiple locations to buy what is now junk pile. Plumbing supply in Waco has 2" and some yards like in Abilene but thats a days work missed to go get it right now.

[@solarandwindinsouthtexasda1473]

@@JOHNDANIEL1 oh wow ont here

[@lasersbee]

Good info as usual. Thanks for the Links... Let's Go Brandon....

[@donaldsteele6276]

FJB lol 😆 😂

[@donaldsteele6276]

foxtrot Uniform Charlie Kilo, Juliet Oscar Echo, Bravo India Delta Echo November!!!!

[@johnq8792]

Haha, yes Brandon did it, so true, also Klaus Schwab and his WEF is to blame.

[@travishodges5179]

why don’t you become a dealer add a 100$ and make them available here?

[@JOHNDANIEL1]

Then it would cost you guys more. My goal is simple find a way to use alternative parts, cut the cost as much as possible for my poor peasant folk friends at a time of need and world crisis created by idiots from the elites and political jackasses.

[@jasonbroom7147]

Put them together and get them up in the air. I won't believe those put out 600 watts until I see it, live. From everything I have seen and heard, small wind turbines aren't worth it. They just don't produce anywhere near what they claim and your just better off buying solar panels. I'm happy to be proven wrong, so show us this wind turbine making 600 watts, let alone the 800 you claim it will peak out at.

[@JOHNDANIEL1]

I've shown it live in numerous videos hitting way over it's rating. Check further back in my videos.

[@diogomartins9101]

He already showed that, you have to dig in his videos to find it, the title will say it all, look for it...

[@JOHNDANIEL1]

@@diogomartins9101 Tested, my new turbine peaked real well, over 300 watts from a hand drill. Experience says that's very good results and wind torque is 2x better always.

[@brianspear1220]

I was right there with you until you blamed the energy crisis on the wrong person goodbye you really need to check your resources

[@JOHNDANIEL1]

Thanks, keep truckin