Smallest 4Liter Case PK39 with RTX 2070

[@AswangRealStories]

nice build

[@ellieskunkz5044]

THIS is how you're supposed to build it.

[@epico5805]

This was exactly what i was looking for! im making a 3d model of the k39 and youre the first person to show all the parts at a good angle lmao

[@itxaddict7503]

GODDAMN! Nice build. The K39 is pretty legit but installing the GPU is some next level ridiculousness.

[@gurindiadventures3810]

Sick money shot shot at the end!! 👍👍👍

[@alienfunbug]

hey do you think that a4x10 exhaust fan makes much of a difference? even if a few C? I'm at the point where ill do anything for additional cooling. Thanks!

[@slingshotwindsor7013]

For me it helped with the noice. The gpu fan now doesn't have to work so hard! The C's I don't know. Didn't measure it.

[@alienfunbug]

@@slingshotwindsor7013 that’s all I needed to know! Thanks so much for the response and the video! I felt crazy for how much care I put into my build but I can see you definitely did the same !!!

[@eddieb3104]

What is thast small fan at the stop for?

[@ansyarh5747]

This psu flex is good??? I want it too, is cheap than other... U use it until now??

[@MatheusSou]

How are temps for the egpu? I'm looking out for buying a 2070 asus mini or Galax Mini but those are hard to find and expensive. There's a 2070 like ours to buy in my city, do you think it worth?

[@slingshotwindsor7013]

Special video for cooling/temperature stuff kzbin.info/www/bejne/pqekgnxjZbJmmM0

[@MuriloRomeraSound]

Nice build! I'm planning on doing a very similar one. Is there any particular reason for the small Noctua cooler glued at the top?

[@slingshotwindsor7013]

Thnks! The reason I glued the small fan is because It was the only place I could install a 40x40 fan on top. I hope it will help for a better airflow. 😅

[@makmcqueen8634]

Hi mate can you list the parts you used and mods you made. Just about to pull the trigger on one of these is that the Aliexpress psu or a modified silverstone?

[@slingshotwindsor7013]

I used the Ali psu with Noctua fan a.aliexpress.com/_eOPBW2

[@slingshotwindsor7013]

And I Just added partslist to description.

[@megaton6023]

Are u gonna upgrade it to the rtx 3060?(single fan ofcourse)

[@slingshotwindsor7013]

No, I sold the case and the rtx2070 after I bought the PK55 case and the rtx3070 a.aliexpress.com/_mMEnE13

[@F1reMaker1]

Why did u not switch the GPU fan for something like a slim 120mm Noctua? I mean it's already deshrouded and should be a better solution than adding those 2 small fans at the top?

[@zapp91]

Cool build! I wonder if the PSU cooks SSD.

[@slingshotwindsor7013]

Possibly, thats why I decided to only use m.2 sata drives

[@appleoptimizer9822]

Yeah it does cook my harddrives to 50 degrees on medium heat for 2 hours

[@Unhomiee]

Is the noctua l9 sufficient to cool the 3600x? Also, how loud is the machine? I notice you replaced the psu fan with the noctua and also included an extra 40mm fan. Why though? Does it do much in moving air?

[@slingshotwindsor7013]

I Made a video for cooling/temperature stuff . kzbin.info/www/bejne/pqekgnxjZbJmmM0 Don't know if the extra fan gives a big difference, but I had spare ones so why not.

[@haoquanliang2817]

nice build. the metalfish s3 has similar layout but little bit taller, it can fit a bigger exhaust fan on the top

[@MatheusSou]

Yes but unfortunately also limited space for a bigger cooler. That why I bought the k39.

[@coryandrum]

@@MatheusSou so that's why i ordered the cyborg

[@haoquanliang2817]

@@MatheusSou I dont have any test to back up, but just my thought: an exhaust fan can prevent hot air get trap in the case, thus it is better to have at least one. I personally will go for the metalfish for that reason, but choose what you like more.

[@TheAhalan]

how is that psu holding up?

[@slingshotwindsor7013]

No problems with psu.

[@문콕패죽이기]

Hi i'm thinking building this itx pc, but little bit worried about temp, so want to set a exhaust fan, are there enough space?

[@slingshotwindsor7013]

Made a video for cooling/temperature stuff . kzbin.info/www/bejne/pqekgnxjZbJmmM0 With gaming I don't have any themal problems and noise is also oke. But with 100% procent stress on the cpu it rises to 86 degrees celcius

[@MRshrir1985]

how long did the psu take to get to you from china ? which country are you from ?

[@slingshotwindsor7013]

18 Jan ordered, 2 feb received. I live in Netherlands. Not bad for something that came from China, but now with corona it could take longer I gues?

[@MRshrir1985]

@@slingshotwindsor7013 Standard aliexpress shipping ? thats crazy, i tried 2 sellers since january, both orders never showed up after 90 days

[@el_tate]

Would it fit another tiny noctua on the graphic card top side?

[@slingshotwindsor7013]

Maybe it would fit if you place the fan in a angle. Or if you modify the housing of the fan it maybe would fit? This week I will check if I can add more fans.

[@slingshotwindsor7013]

Hmm I can't share a picture in comment, but yes it is possible to put some 40x40x10 fans on the top! Just enought spare to put 4 in a row

[@slingshotwindsor7013]

kzbin.info/www/bejne/fXaopHZjp7BrfLM

[@el_tate]

@@slingshotwindsor7013 Thanks!!

[@R0GUEL0KI]

@@slingshotwindsor7013 This is cool thanks! Did you do any thermal checks before and after putting the noctuas in? Are they actually worth spending an extra $15 each on them?

[@yamada-san7306]

Can you put name of parts in description?

[@slingshotwindsor7013]

Yeps, it's now added to the description

[@KenKlejs]

Just made a build in the same case, but with a non-modular FlexATX psu (a Silverstone 350W, what a nightmare!). Did you also install a Noctua fan in the PSU and control it via a motherboard fan header?

[@slingshotwindsor7013]

Nice you have the same case! Too bad for the non-modular psu, even with I had trouble with cable management. Yes I control the Noctua fan through my motherboard, but speed is not controlled. Still on my to do list to find out how:)

[@danielp121]

Hey your the dude on reddit. 👋🏿 I remember your disassembled 2070 and K39 case 😏 Edit: nice build tho. I saw you disasembled 1/2 of the case > insert mobo > then put the other half. Is it easier to build like that way (like Linus did to his Velka 3) or is it easier when the case is not disassembled.

[@slingshotwindsor7013]

Thanks! Well I had to dissamble the case because some hardware parts just didn't fit. Also the cable management is easier this way:) Didn't know I'm on Reddit? Do you have a link?

[@kingkea3451]

How ar eyour thermals for the 3600x on the L9a?

[@slingshotwindsor7013]

Made a video for cooling/temperature stuff . kzbin.info/www/bejne/pqekgnxjZbJmmM0

[@yubinator7455]

which do you think is better: Velka 3 or the K39?

[@slingshotwindsor7013]

Don't know. For the money I put in the hardware I prefer the Velka! Just because it's a known brand. But the Velka was for months out of stock so I tried the K39. I did't do any thermal compensation test so I can't dat which one is better.

[@yubinator7455]

@@slingshotwindsor7013 cool, and last question. is the PSU good too? cus it is hard to find any Flex PSU locally and im not from the US nor EU so shipping is costly.

[@slingshotwindsor7013]

Yes the PSU is good. But I recommand to replace the stock 40*20fan with a noctua 40x20 fan.

[@sibusisomaboya6023]

Top build😊 is the case for sale?

[@slingshotwindsor7013]

Yes! For case see link in description

[@Silverwidows]

How did you do custom cables with a flex psu?

[@slingshotwindsor7013]

Cables came with the PSU, did not need to change length or anything a.aliexpress.com/_eO29Ar

[@mcmitraeducation316]

@@slingshotwindsor7013 Is the PSU good? Thinking of buying this one now

[@slingshotwindsor7013]

@@mcmitraeducation316 yess, no problems with it.

[@MohondhaY]

Artim the fan inside the PSU gets pretty loud. If you swap that fan with a Noctua fan, noise problem will be solved. Other than that, it's awesome!

[@justoalvarez3940]

Did you take the GPU fan cover to make it fit?

[@slingshotwindsor7013]

No, it is a gpu from the aorus gaming box rtx 2070

[@justoalvarez3940]

@@slingshotwindsor7013 Ohhhhhh....

[@jacob1244]

How sturdy is the case???

[@slingshotwindsor7013]

When all hardware is installed it feels very solid! Also heavier than you think:)

[@jacob1244]

Slingshot Windsor how long did shipping take? If you are in the USA, if not how long for you?

[@Gh3esVids]

Where did you get that riser cable? I have the exact same case and finding the correct riser is a nightmare!

[@gazooc]

Cloud fan store on aliexpress. i get mine riser (ADT01) for around 15$)

[@gabrielliew455]

item.taobao.com/item.htm?spm=a1z09.2.0.0.30782e8dA3QDl2&id=610349461642&_u=g207mm6ot48f15 But be careful to get the correct length, There are 3 options. Cheers

[@slingshotwindsor7013]

I bought this one. It came with the case www.aliexpress.com/item/4000187782851.html

[@QuantumBraced]

Can you use an HDPlex PSU with this case?

[@slingshotwindsor7013]

Don't know what size your psu is? Check the link in my description. On Ali you can see the dimensions of the case!

[@erdune]

New velka 3 review pls

[@slingshotwindsor7013]

Sure! Can you send me a Velka Case?

[@erdune]

@@slingshotwindsor7013 www.velkase.com/products/velka-3 This is New revision :D look so beautiful

[@jonathanchristoper2043]

you sure its a 3500x? I thought there's only 3600x

[@slingshotwindsor7013]

Lol, yes it's a 3600x XD. Thnks, I will change it

[@jonathanchristoper2043]

@@slingshotwindsor7013 i am also using the 3600x with a cryorig c7 but the case hasnt arrived. How are the temperatures?

[@gambitgambitgambit]

How loud is gpu?

[@slingshotwindsor7013]

Made a video for cooling/temperature stuff . kzbin.info/www/bejne/pqekgnxjZbJmmM0

[@comosehace2767]

What about temps?

[@slingshotwindsor7013]

So far I don't have any thermal problems. I play a lot VR games like Half-life Alyx. Soon I will make a log of the temps and performance!

[@slingshotwindsor7013]

Made a video for cooling/temperature stuff . kzbin.info/www/bejne/pqekgnxjZbJmmM0

[@aby9x]

Where to get that RTX 2070??

[@slingshotwindsor7013]

This one came out of a aorus gaming box with rtx 2070 (egpu)

[@binhnguyenthanh9011]

cool graphic card

[@Silverwidows]

Looks like the velka 3

[@slingshotwindsor7013]

Yes, I first wanted to buy the velka 3, except it was soldout. So I went looking for a good alternative.

[@Silverwidows]

@@slingshotwindsor7013 same here so thank you for the video.

[@MohondhaY]

I'd buy this instead of the Velka 3. Same size, but much cheaper.

[@temtemhunters2762]

(Not sure if this type of post is allowed here) hey gyus i recently found out about these micro builds with cases like the k39 and the velka 3 and im super impressed ! I was planning on getting a gaming laptop or adding an external gpu to my current ultrabook but these cases which can even fit in a backpack are amazing ! So much bang for the buck, endless upgradability and almost silent with the right fan replacements. So this is why i thought of slowly gathering the funds to make 2 full k39 builds with the best parts possible, assembled by me and give them away somewhere in 2021 . I want people to start realizing the potential of those little beasts and how much better they are than other solutions! To keep in touch and to be eligible for this huge giveaway you should be a member of my new mini itx facebook group where we show off our small factor builds ! Thats all ! facebook.com/groups/370919390973359 Thank you for making me aware of this gem !