SMALLEST SKATEBOARD WHEELS ON THE INTERNET!

#skate #skatewheels #amazon
We've finally done it. We have found the literal smallest skateboard wheels on Amazon and wow they are even smaller than we imagined!
Even though they are tiny and flatspot extremely easily... these wheels are pretty dang good!
Get everything you need to learn how to skateboard at brailleskatebo...
Download the Braille App here: brailleskatebo...
For media or brand inquiries email [e-mail]

[@matthewvega5699]

I used to skate these wheels in the mid to late 90's. They were 39mm and I loved them! I've had a hard time finding small ones too. But the ones back in the day were a little wider and they were tight. We used to skate them until they wore down to bearing covers😄

[@himebaughchris4026]

Yup. Tiny wheels and no more Risers.

[@ForeverFinest]

I had 42mms in the early-mid 2000s. I absolutely loved them.

[@matthewvega5699]

@@ForeverFinest That's awesome! Idk why these guys are struggling. I used to skate everywhere with those😄

[@BeastOuncelifeian]

I skated 28millimeter wheels in the early 90's. Think they were spitfire. They fit though, no need for spacers. Idk why these guys are struggling. They aren't bombing a highway. They are on smooth cement. With the 28's you had to pop over every crack, but popping was easier, ollie's we're higher,and technical tricks were easier too. Because your force transfered to the ground faster. But ,on some ledge tricks....yes, you can slide those small nuts right onto the top of what you trying to slide ,or off the edge of what you grind. We called these street wheels and 58mm's were vert wheels. Which, looking back, is insane because bigger wheels move you faster. Which was the point for vert. Faster drops mean higher pops. If I weren't disabled with a bad back, I'd still skate daily.

[@matthewvega5699]

@@BeastOuncelifeian Exactly!! All the 52+ mm today were all big vert wheels back then. Lol crazy to think about now😄 Yea I was super technical and popped huge Ollie's with those small wheels😁

[@mrcbeee]

These are funny, I remember skateboarding back in the 80/90's wheels like this were a trend!

[@PHeMoX]

Not like _this_ small though... More like 48-52mm. And the people who really wore down their wheels into the 38-39mm range were really kind of nuts (or too broke to buy new ones). In reality, anything smaller than 50mm is horrible for streetskating and the benefit for flip tricks is virtually non-existent compared to the total lack in comfort. In skateparks especially with anything related to coping, small wheels are completely pointless. I'd bet the only people skating the 38mm stuff back then, were people doing nothing but flatground flip stuff.

[@tommylabors]

@@PHeMoX Exactly.. that's when street skating was really progressing. The lower to the ground the easier to flip the board. Wheels kept getting smaller and no more riser pads.

[@mrcbeee]

​@@PHeMoX Maybe, but I am sure this was a thing. I knew people that would get new wheels and sand them down. It was just a trend. They then wondered why a grain of sand would lead them to slamming on the floor. Back then as skateparks were not a thing, and here in the UK, concrete wasn't a thing used for any kind of paving, it just made it a beeping nightmare.

[@eaf27]

I was about to say the same thing. It seemed like it was a big deal where I was too to have the smallest and hardest wheels possible.

[@TheRealPapaChico]

It was a trend to ride your wheels until you couldn't.

[@GearSeekers]

In the next one you should try 2 bearing spacers per corner so the wheels don't move around

[@cgjr91]

Or just two bearing not the spacers?

[@jeremyryannoel]

The space between the bearings (in this video) are narrower than most skate wheels…highly doubt they were this narrow in the 90s.

[@brailleskateboarding]

Good idea

[@forg0tten]

in the 90's me and my friends wore our wheels down to the smallest size possible on a lathe and called them "Bearing Condoms" 🤷‍♂️🤷‍♂️

[@kway-suh-dilla7932]

😅😮

[@sonsauvage]

When mo said "they took my catalytic converter" I felt that haha

[@mitchzurbrigg2403]

Love to see the bigger gal at 9:55 wearing the pads and helmet. I'm a bigger guy who likes to skate and is just learnin, don't feel embarrassed wearing that stuff! One love!

[@Coleman_H]

All that matters is you're out there having fun

[@islandbear987]

I expected to see a bunch of nasty comments, but I ended up finding this completely sincere one. Awesome!

[@creytax9802]

True Story, go out and have fun!

[@strikerone475]

That's a really down-to-earth wheel.

[@ieatcatmeat1130]

That was wheely funny

[@thatdbzcinema1130]

You had me ROLLING laughing

[@chxddm]

Couldnt imagine bearing that joke.

[@seandavis397]

That one had me on my tail.

[@mrnoob2117]

💀💀

[@ivy_leaf3011]

I usually go to a skatepark about 30 mins away from my home but today I went to my local skate park and (I only started skating like 3 months ago) yeah I think I did pretty well. Thanks for inspiring me braille

[@scottliebowitz4605]

Never stop skating

[@fiditunka]

try inline skate grind wheels next. they come in the low 40mm range too but they are made of 100a+ urethan and fit a skateboard just fine width-wise ...

[@Blackdoginsky]

I've seen some super worn down wheels before. Not quite like this but they started out tiny to begin with and then got soooo small

[@jordonwinn7661]

So many changes with Braille throughout the years, but the content keeps on rolling and entertaining! I love you guys:)

[@NoWayGaming410]

The most epic flat spots ever. Brings a new meaning to "Flat-ground" lol.

[@h7opolo]

so many moments that made me crack up: 2:59 "aquaman - out of everyone? he met jason mamoa, that's why." 6:23 wheels weren't even tightened. 10:10 "welcome to bakersfield." 16:53 "i think that counts" "what?!" 18:20 "you know what's making it harder?" "the small wheels??" lmao

[@ThatChicagoKid]

The GLO FATHER is great as a cameraman 💪🏽😎

[@insomniacbritgaming1632]

I once had a really worn down pair of wheels, only replaced them due to powerslides causing insane levels of flat spots... actually loved those wheels

[@britt_thee_art1st]

It the sound of the wheels for me 😂😂😂 when Mo was trying the wall ride the sound with the multiple attempts had me cracking up😂

[@JustWayve]

I Just bought small wheels last week. Love to y’all still GRINDING 🤙🏽

[@coolj514]

Bro mogley at 5:58 had me dead 🤣… wheel necklace nd everything “I think I’m next”

[@cloudzerofivedeuce9907]

Heck yea!!! Vid before my mornin sesh! Lets goooo!!

[@jeremyryannoel]

For authenticity’s sake, you should skate on an 8.5” deck with a similar shape ridden from 1993. The wheels are half the story! Bonking on rollaways are especially essential haha

[@brailleskateboarding]

Hahaha we really need to do a full throwback skate with the board and the wheels and giant pants, find some Airwalk shoes and take it to 100

[@jeremyryannoel]

@@brailleskateboarding Don’t get me wrong, this was gnarly and awesome! Great job with this one!

[@Mikkaoru1]

Moe is a raging tornado of energy in this vid!! These tiny wheels got him all rowdy it seems x'D

[@bltpork]

5:15 best grip tape graphic ive ever seen

[@MattFestle]

Chris with the anchorman reference 🤘

[@johnny_jun_]

So funny! Mo did a powerslide and then got a flat spot! 🤣

[@nicholascrow8133]

Try searching for rollerblade anti rocker wheels, you can even get plastic ones (worlds longest powerslide take 2?) same bearings!

[@benshelton6796]

The captions constantly say "applause" when they're rolling lol

[@koketsomohubela5426]

Always love the box opening cos of u guys I fell in love. With skating it's been one year now

[@himebaughchris4026]

Paint your Catalytic Converter High Temp Blaze Orange and Stamp or Etch your VIN number on it, btw.

[@666DemonCleaner]

“Should I go light on that wheel?” Killed me

[@turdl38]

JD showing that the healing of a kid is so great. Miss that.

[@rogerbell1455]

I love it they remind me of my T Bones back in the day they were so far gone but I was broke as it got my local skate shop hook me up with some new wheels after seeing them

[@brailleskateboarding]

That’s a good local

[@davidrain04]

Braille is the reason why I love skateboarding!❤️😂🤘❤️❤️❤️

[@owenthegr8146]

Chris can skate anything anytime anywhere

[@jakobamon4276]

Hahaha 2nd i guess guys i love the Braille Team Videos please never quit making them

[@tjdouglasjr6944]

At the 17:20 mark if Rick were to do the Lion King scene this video would of been even more epic than it is now LMAO!!!!!!!

[@matt_gettings]

Back when I was younger I use always skate small wheels, I loved it. But I use to ride them till they were small. Ricta wheels to be exact

[@Frogtarts_Gaming]

I agree with Mo. the blue beetle is dope af. Wildly underrated DC hero

[@-dfh-866]

I agree when I heard that too.

[@getwrekt408]

Nothing is impossible for Braille 💯

[@willblackett4709]

Watching Mo hit that wall and fall so much, made me scared for his ankles !!! Well, he is a Send-ninja I just love Team Braille and don't wanna see you get hurt THINK SAFETY

[@yummydogs5080]

Braille I love you guys I’ve been watching for like 3 years

[@kimoarmstrong3519]

I had Bucky Lsek momo's back in the early 90's. They were 38mm. You could try wheels from heely's.

[@sakfpv8444]

I used to skate 45mm back in my younger years. I was mainly a flatground/ledge/rail guy. Then I tried 53mm and after a week of getting used to it I never went back

[@purpleray_]

I wanna get some inspiration how to take this fresh start, cuz i took a 2 year skateboarding brake and now ill' start skateboarding again

[@whyzzzcat]

My buddy had a regular set of wheels that became this small from always riding concrete.

[@curtisjacksons3027]

We need another SKATE EVERYTHING WARS!

[@EvanFromJersey]

I’m pretty sure it wasn’t on the small wheel board, but can we talk about 10:53 McNuggs kickflip body varial… he never ceases to amaze me with his creativity on the board

[@novak664]

pretty sure that was a ghettobird, but I was searching for your comment😂

[@sergiodelgado3862]

He said they took my catalytic converter 😂 😂 lol

[@LowlyEidolon]

I remember a friend in the mid 2000s having work down weals that where smaller then that but they defo weren't purchased as small wheels, must have been like 5mm thicker then the bearings

[@brailleskateboarding]

Sick

[@supersalty5856]

freemont got a nice amount of lights, y’all should film a night time skate sesh

[@silentfox8]

i used to skate autobahn wheels down to the clear core, i loved it that way

[@xxsmokerxx6477]

The Art of skateboarding is trying trying trying and trying till you get it and enjoy the feeling of success

[@Belhade]

I seen guys using these on quads, they sound like a tornado on smooth wood floors!

[@punkfiendofficial]

Uzis energy in this video is a mood

[@ritenour12]

Would love to see them visit this again with mogly ideas having the two wheels would be a lot cooler

[@djilly75]

Wea used to skate will that small back in late 90s. Actually even smaller. They were barely bigger than the bearing

[@Honey_Daddy]

The catalytic converter helps to lower emissions by capturing and burning off excess hydrocarbons and other toxic compounds before the exhaust leaves the end of the pipe. That's what a catalytic converter is for xD

[@doggodoggo3000]

cant steal what isn't there.

[@Honey_Daddy]

@@doggodoggo3000 xD hey, in states that don't do smog checks, more power. I do think it's federal law to have one, but federal law is just another list of things we pretend not to know the contents of for reasons like this.

[@PleasureAfterWorkKiteVideos]

We used to ride wheels with simmilar diameter, but of course the with was wider…it was the NewDeal time with huge pants :-)

[@Rightomate]

I remember in the early to mid 90's when small wheels were popular.

[@brailleskateboarding]

Same

[@IBooNzHD]

Can you please link the guys channels in every vid? Will help them grow their own channels while being in your vids!

[@gilesspencer4278]

Still got my Toxic 39ers which are now worn down to 32mm. I'm more grown up now so have changed to 36mm wheels!

[@GodofLovers]

That's still small AF lol

[@tylersativa]

13:29 I thought bro was gonna die on the board slide gg

[@WillsBeard]

That one comment about flat spotting the wheel gave me an idea. Get a couple sets of the softest wheels you can find, and have a power slide competition to see who can ruin their set the most.

[@mikebowerman989]

Peacemaker was fire I hope they come out wit more

[@TrippyStixx_]

mo had to do one of the hardest things ever, #1 mvp

[@rimabeans166]

10:04 I can confirm, someone recently stole my catalytic converter and my car now sounds like this.

[@burtman9649]

The smallest wheels back in 91-92 were called Think 💡 Quarters and they were 25mm. They only cost $25

[@honorableundead2273]

I remember flat spotting some cheap wheels from Amazon a while back

[@ShawnxEdge]

Need to do a tiny wheels + big pants with 90’s skate tricks game of skate

[@victoriaross9941]

The number of times that little girl almost gets run over by the guys throughout this entire video is hilarious. Like how can one kid be in so many unfortunately timed places at once?!

[@marklewis35]

Tiny wheels were in style for a while in the very early 90's. People used to put their wheels on a lathe and make them as small as possible .

[@PHeMoX]

Not really true, actually. Vert skating was super popular. And you can't vert skate with wheels smaller than say 51mm. Most people would easily prefer 54mm or larger for vert. And this was true in the 90s. Anyone skating street wouldn't ride 38-48mm wheels either, but go bigger for sure. It's a bit of a myth to suggest everyone rode tiny wheels. And I don't think everyone is skating really big wheels now either. I think 52mm is still a favorite amongst most.

[@marklewis35]

@@PHeMoX it may not have been true where ever you were in the world but it was most definitely true where I live. I personally saw loads of people riding tiny wheels and they were all on street as there wasn't a single skate park or ramp in my home town.

[@AaronFelizmenio]

Mad respect for Gabe for saying the truth. Blue Beetle is indeed the best DC superhero.

[@barneyruckus]

Try Moonshine UHMW grind wheels for online skates. :)

[@jasonhowell9589]

I remember in the early 90s this was The fad to see how small you could wear down your skateboard wheels I probably still have a set in a box that are probably about 2 to 3 mm thick literally hit a crack in the road n fly off

[@thinkpad4567]

Try the wheels from heelies shoes, usually they fit a skate perfect and they're about the same diameter.

[@esbreak4523]

The videos are literally an essential 🙏

[@mithunden]

Back to high school! watch out for pebbles the size of a grain of sand!

[@passifeye]

mogley is such an inspiring skater!!

[@austinchilcote6536]

I had a set of hubba 6 shooters that I had worn down to this size! Skinny wheels used to be dope

[@moralesrcdesigns3784]

“They took my catalytic converter” *rides away with some loud flat spots* 😂

[@prestong5869]

I flat spotted some formula fours last week and I don’t have any other wheels

[@jordanpeterson5038]

I've never been a skateboarder but never understood how they go as fast as they do sometimes. Even with small wheels I've seen people go fast.

[@iosmotions1348]

I used to skate on smaller wheels than these like 15 years ago, no cap, they are honestly not bad, maybe the newer ones today are but the old ones weren’t horrible and unusable

[@dripybtw5464]

use teck deck wheels!

[@adamphilp1458]

In the 90's I had Spitfire minis that were almost that small

[@oriondemetrios]

Bruh Aquaman is so UNDERRATED fr smh, although the movies did make him so much cooler than his comic counterpart

[@allenlark]

can you try patching flat spots with super glue?

[@8areen]

19:13 the person behind was just fullspeed sending this (ramp) Lamao

[@ZebbMassiv]

I wonder when Jd's little voice drops. It's still so cute

[@scottstickler6017]

Simon Woodstock!!!

[@nickphillips161]

I found some wheels that are 27 mm. There almost pointless to use unless its a super smooth surface

[@CraygK_15]

7:04 iv done that to so many bairings and idk how lol

[@BladeOlson]

Those were popular in the 90s , "bearing covers"

[@fredpacheco8586]

IM PUMPED UP BOY LETSSS GOOO!!!

[@benm2784]

0:01 Sounds like an A-10 Thunderbolt

[@desireedancy5154]

I wish I can meet you guys in person and I never seen wheels that small and I need new wheels for my board

[@glennh9811]

I use to wear down my pink skateboard wheels about that size

[@agh101]

These wheeles are looking like tech decks wheeles😂

[@EverythingGeek]

Favorite super hero definitely Deadpool

[@kelevra558]

Sounds like my little brothers 4 runner he neglected to put oil in. Pulls up to my shop revving his engine listening to it like it. I came outside waving my arms like a crazy person "DUDE!! SHUT IT DOWN SHUT IT DOWN!!" Yea. Totally cooked every bearing in the engine.

[@j4nk3n]

4:11 gabe thinks skate wheels are made of rubber 😆 🤣