Smart Door Bell using ESP32 Cam/ESP-EYE & Blynk

[@chimpofm]

Another Perfect video! Hello from the UK. You have saved me so much time on my project. I just followed your instructions to the letter and it works perfectly. I connected it to the timer. So it takes a photo every hour. Now it makes timelapses of my greenhouse! thank you. I understand you are very busy. Could you make a video connecting a ph sensor. Ec sensor and ds18b20 temp probe. And add it all to blynk on an esp32. To make an Iot water monitor. Dont forget youll need yo isolate the ec from the ph. I have been using the df robot trio. (Ph ec and isolator). But they are really expensive. I and the whole hydroponic community would love a cheaper solution to this problem.

[@vikramjeetpaul]

Amazing project... I loved it a lot

[@maliarif2023]

Another masterpiece , thank-you sir

[@soundarpandian3423]

Proud of you bro

[@kenkaneki-ls3iz]

Awsm man 🔥 love from tamil nadu

[@wattage2007]

You have a very likeable manner :)

[@bryanst.martin7134]

I like! Might have solved my remote gate access needs. Over 100M from house to gate. Frequent deliveries, Kids, dog...

[@shakerileiwat4341]

Great , thank you man ♥♥♥

[@yogendrajamsariya1193]

Lots of love bro,,,,

[@Abha-com]

THis is awesome. THank You bro.

[@shubhamragit3851]

Really good video i love it.

[@debasishbehera9783]

Great project sir👌👌👌👌

[@tirupatibalajidighole7500]

*superrrr project* *LOVE U*

[@fusionermx]

Great idea... Big WOW!!! I guess..

[@nimalw4427]

Hi, Thanks for all your videos. I really enjoy your lively demeanor. I have tried to create the doorbell according to your instructions and code. As Blynk is 2.0 now, few things seem to have changed. I was able to get the program running but cannot get the picture to show in mobile app. Notification is working. Appreciate if you could take a look and post an update.

[@iCtrlZDesign]

Great work!! I've been looking for information about smart peepholes for days, but there is no "simple" peephole that doesn't look like these "super tech junk" and that can have a dead monitor and a direct link to HOME ASSISTANT. I have seen some of your videos and I wanted to ask you if there is an ESP32 with greater refreshment (so that the image looks more fluid) in a display on the door and that at the same time can send said information to HOME ASSISTANT!? All this with a single ESP32 and a 120-160º camera, is it possible?

[@b4kk4li]

great work, im interested if you can make it a door bell with a button using gpio and potentially integrating with home assistant ?

[@gileansolomonsz6931]

Hi Mate from Australia, awesome video as usual. I have made this project and it works like a charm. I have a question, this drains the battery and the cam stays on all the time, so it's not something that one I can design a 3d box and fix on my door. Is there a way to, 1. have it boot send the image and wait for the door to be opened and then sleep again? 2. I am using mqtt with home assistant, can this code be modified to use mqtt? not a professional home automation guru, have learned watching heaps of videos such as yours and got interested in it during lock down so any help will be appreciated

[@debasishbanerjee3600]

IT'S A USEFUL PROJECT BY TECHISMS. Thanks for sharing ur knowledge Sachin

[@techiesms]

#ShareVideoShareKnowledge

[@sujitmishra8249]

Nice project sir. Will love to see this project with smart door lock. Please make it sir..

[@dennisasamoah2213]

great stuff

[@motivationtech5231]

Amazing sir

[@firas.benokba]

Thank you my friend I follow you from Algeria

[@techiesms]

Keep loving, keep supporting #ShareVideoShareKnowledge

[@shubhamshukla167]

Awesome 😊👍

[@nexusvijayawada6648]

Nice bro Ur excellent

[@rohanguptamusic]

This channel single handedly dominating IOT on YT

[@rohanguptamusic]

@Carson Brayden Dude.. Give me a trick to get a gf first.

[@shreyas8040]

Thanks for that

[@yogendrajamsariya1193]

Wow awesome 😍,,,,,,,,

[@guatagel2454]

Nice!

[@sanjubaba1978]

I am having an esp32 cam board, to implement the doorbell solution do I need to interface the external button(which is not there in esp32 cam) to the functioning of the solution. also, suggest about the PIN numbers as well. if I could successful to implement this solution, would love to share it with you. Many thanks in advance.

[@firas.benokba]

You should learn how to set up EEPROM ES32 and NODEMCU with BLYNK

[@eduardovillar2211]

Hello, greetings from Spain! If I understand correctly, project just only work if the blynk app is connected to the same local network, right? In your case you call a function notify when a button is pressed but can be used other launchers like time or virtual button on the blynk app. Would be great if project works on the cloud and remotely to be used as a surveillance system or remote door opening ( ej when amazon call home and we are not in :-). )

[@juliendeal3083]

Nice video, but how you have connected the doorbell visible into the intro video on esp-eye?

[@seawalker99]

Hi. Very interesting project. Is their anyway we can add face recognition to this project?

[@shreyas8040]

I am waiting for this video

[@nirutg5130]

Thank you very much for sharing, please kindly share how many item list model to buy to integrate to create this project?

[@charleena2319]

Super cool. Do you know how to save the pictures ?

[@amitabheer]

Super liked

[@samsonshankaran6051]

Nice project. This might put some smart door bell system manufacturers out of busines.

[@techiesms]

Hahaha

[@maliarif2023]

project is AWesome.!! Sir, can we make this project with nodemcu board?

[@gerardomorales9203]

Good Proyect, but Is there a solution to continue receiving image when I connect to another SSID in the same LAN?

[@aboyousifiotsmartsolutions1036]

Very nice

[@atharvajoshi9099]

Actually i want to make an esp 32 cam robot car and i want to control it through google assistant it will be possible by this esp 32 cam or should i use node mcu with it?

[@giancarlomejia5496]

i like your proyect but i have some questions this only works in my house or I can see it from anywhere in the world

[@lucasmoniz4166]

Hello, greetings from Brazil. I did this project using ESP32-CAM. However, the face detection does not work and notifications are only sent if you jump the 4IO and 5IO terminals. Please, could I send the code or make a video exclusively for ESP32-CAM? Thanks.

[@pamarthikanakaraja9812]

Good video Do more videos on TTGO T-CALL board it is awesome board for designing IoT Projects

[@techiesms]

Sure Just keep loving and keep supporting

[@binodkhemka1725]

I need your help in one my projects. Can you help me send text to a 16X2 LCD using blynk

[@Ashok-tm5bz]

I'm love this type of projects and Ur videos from 1.5 years, Can make the project on live steam using blynk app for more than one users. Please

[@techiesms]

I’ll try

[@prateekgupta3666]

Yes you make it and share the project with your family members or you can share your user name and password

[@Techonsapevole]

@@techiesms +1 is there a board where you can stream audio like a walkie talkie?

[@chimpofm]

how do i save the images taken by the doorbell cam to the SD card?

[@hajeevanselvanayagam9722]

Video was awesome. Can’t we stream live video?

[@harryiotdeveloper7307]

Great ideas comes ; great people's ; it's awesome....

[@harryiotdeveloper7307]

Sir can you make dimmer by using blynk app

[@biancabersinar376]

Image Capture : ESP32CAM-Blynks It works!! many thanks!!! is it possible to create connection for Video streaming : ESP32CAM-Blynks ??

[@jicksonl]

Can I get notifications if my phone was connected to different wifi network or if am using mobile internet when I am away from my home..??

[@bogdankdw4155]

hello, if i.m buyng esp32-cam do i need to buy all the components from behind?

[@raahimirfan5996]

Can we use NodeMCU ESP8266? Thanks!

[@pradeepkurmi8762]

Is this project work with other networks like my mobile in other networks and esp32 in other wifi network??

[@GK-rr3fe]

good concept sir...wonderful

[@techiesms]

If you really loved it Do considering sharing it with others #ShareVideoShareKnowledge

[@GK-rr3fe]

@@techiesms definitely sir and you want to make more different videos like this.

[@MrTalhakamran2006]

So it doesnot store on cloud. It only works on cellphone if you are on the same wifi network, correct?

[@kavitahkavi921]

Can you make esp cam connect with a gps router which can be easier for monitoring the place that i wanna view from far from the place

[@yugannithishkumart9317]

Im using esp32 cam which one should i uncmment

[@zhixuan24059]

Hi, i really like your video. But may i have the connection of the component? I had try many time but it fail. And i cant get it.

[@prateekgupta3666]

I made sumilar project with the help of node mcu and my existing ip camera long ago using pushbox notification.nice project.can you share some code in which it can open door lock using face recognition?

[@techiesms]

Let me first try to make that

[@karthikshet6226]

Can I do using raspberry and raspberry cam?

[@user-ci1pr9gb2h]

smart !

[@harshadlokhande_veditekk]

for ESP-EYE, I am getting "Compilation error: Error: 2 UNKNOWN: text section exceeds available space in board" , I am Using ESP Board ver 1.06 and Selected Board as "ESP32 Dev Module"

[@Ruma9614364681]

Please make a same video with smart door lock, or a stepper motor lock.

[@josecorreia2584]

Does it work when you are away from your network?

[@umer4414]

Is there a way to do this project without Blynk i.e. using ESP32-CAM and a simple android application?

[@voiceoftruth1O1]

Sir. can you make this mesh network offline project without internet. Because we don't have online access. Thanks

[@elave16]

is it possible to stream video also?

[@letanat8966]

Please help me use esp32 cam to both record live video while taking pictures saved on memory card

[@surajmhaske2552]

Can you make video regrading k210 processor?

[@actimix9]

May I know the input, process & output for this project

[@saketmankar3648]

Would like to use esp32cam as a attendance +door lock Can u help

[@karthickm3585]

Sir I am a beginner of the and esp8266 project but how I learn Arduino language which website and author you learn this Arduino language

[@shubhodeepmandal1499]

Can I make a bylink like iot app but a customised version??

[@Sharan141]

Awesome video buddy..pls make access control with esp 32 cam and blynk

[@techiesms]

What u want to make ?

[@Sharan141]

@@techiesms access control with face recognition on esp32 cam with blynk support bro...I have been working on this for more than a month...but still trying...pls help me out bro

[@lucasmoniz4166]

@@Sharan141 Me too. I found this link, but the video strream doesn't work. robotzero.one/face-recognition-with-blynk/

[@yashs.kacholiya1569]

Can it be controlled with apple homekit

[@johnnywonka1211]

how about voice communication as well.?

[@jyotiprabhakar2560]

Sir can we connect gsm module to esp-32

[@muix]

How to do real time voice communication between node mcu and Android Pleaseeee replyyy

[@thisisjoyjacob]

Studio Renovate kardia??woww , yaa lighting ka better use? Bit that faint Yellow light in background looks to attractive and soothes the whole video BTW project Ekdum solid idea.

[@techiesms]

Thanks bro

[@ahedalbadin2889]

Great project, I love it Unfortunately, it works only on local network Right??

[@tseawell90]

Yes so it’s not very useful

[@rameshk.pandey6883]

Hi, whenever compaling the code ,i am getting error ,camera_pins .h , in every esp32 cam eye project including this project too. please i hope you can solve this problum n rply.

[@rinku2004ful]

Another master stroke from techiesms, i was waiting for this. Thnx sachin ji. Special love frm mp . Keep spreading such knowledge.

[@techiesms]

Thanks for Such kind of love and support #ShareVideoShareKnowledge

[@mixall3508]

Samad from Turkey Istanbul Good morning Sir how are you doing I hope fine I need your help for purchasing latest system i did tell you before my 12 years old Son is doing these project is that possible to help us i have friends in India they can send that to me my how can i contact you ?

[@nagarava]

Also add face recognition opening door bell

[@ankitjain-bv3pd]

Kindly provide one relay with lock in this project

[@motivation.ai.shorts]

I am working on a project in which I need a live video stream from the ESP32 cam module on the Blynk app’s Video Streaming widget. The following code i have used is in Arduino IDE example Examples>ESP32>Camera>CameraWebServer. Using this code I get the camera’s IP address on which a perfect live video stream can be seen using a browser .But i am not able to view stream when I use this IP address in Blynk’s Video Streaming widget. Could anyone please help me in setting up a video stream form ESP32 CAM in blynk app widget. Thank you

[@sujanadevarapu9915]

Can you please share circuit connections

[@lateststuff8739]

Hello, I would like to contact you regarding a project I would like to do. How can I contact you?

[@saijayakrishnajk1389]

Super bro u are awesome I want ur advice on one project

[@techiesms]

Yes tell me

[@saijayakrishnajk1389]

@@techiesms my problem can we add face recognition to this esp eye or 32 is there any alternative for esp cam which has more pixels Thanku sir waiting for your reply🙋‍♂️

[@adityakanakamalla8979]

I got an error after uploading code ...i.e in serial monitor....instead of showing up address..I'm getting camera not supported...and camera probe error ox2404...can u suggest best way to overcome this problem

[@nithinsuresh9571]

what was the cost

[@caothucdang9696]

The link code above is dead. Can you give me the link code again? thanks.

[@skyvxicab346]

sir please make a video for live stream using esp32

[@IMRANKHAN-we9un]

Very good project but very costly compared to your old camera projects....

[@krrishchheda2252]

Hello Sir, How you connected push button to door bell

[@deweshkumarmahur]

sir make a video on arduino latest board portenta H7.

[@ada3046]

How about using pubsub client library