Smart Door Using PIR Motion Sensor | Arduino | Prototype | Tutorial

[@bhagyasri9916]

My internship project is completed,and it's working 😁 so happy tnx for vdo and code too

[@119samruddhipatil7]

Did u used the code which is given in description

[@ACSrobotics-wp3dv]

i have not seen a more a beutiful video than this

[@davidgood1072]

🎉🎉 FANTASTIC AND VERY CLEAR🎉🎉

[@lonelykaraokist]

Awesome video. Very helpful. Thanks so much! Subscribed to you :)

[@craftoast]

Thanks for the sub!

[@rajeevdhiman5648]

Over powered

[@craftoast]

Thank you for op comment 😀 😃

[@ayenilay]

This is very creative👍🤙😎

[@craftoast]

Thanks broooo

[@cheliankalpana7721]

If we copy-paste your code will it work. This is for my son's project, so don't know about coding. So I'm asking this, please help 🙏

[@justtinmedina-u3o]

thanks for the code, I found it very useful for a project.

[@hannahalphonsa-p7q]

which website did u use to enter the code in

[@mareeswaranvp8171]

@@hannahalphonsa-p7q heyy maybe i can help you

[@projectl-r1u]

this project is very good

[@ACSrobotics-wp3dv]

i love this

[@aiamharsha]

Keeping doing the great work!!

[@craftoast]

Thank you 😊

[@mareeswaranvp8171]

hey what abt the connecting wires shd we get it seperatley . also can u give me exact details of the wire he is connecting with sensor

[@mohamednoufhal2547]

Sir I did the same as you but my servo motor is only vibrating and I also connected Ultrasonic sensor in my project I tried with many servo motors but all are vibrating can somebody help me

[@craftoast]

Try connecting servo to only 5V, and the code which i have given won't work for ultra Sonic sensor, just in case..

[@esang2667]

Hi, i copied your project but it doesn't work on me. i have already followed every steps. What do you think is the problem?

[@ciabru4239]

!!!

[@margarethashipala1410]

can i use the KEYESTUDIO PIR Motion Sensor

[@lynz8930]

brother can you tell me where you have used the jumper cable ?

[@thevanveeran6759]

hi, did the same as you, but the pir sensor seems to not detect motion, is it because of the 3.3V not enough to power it ?

[@craftoast]

Yes try it out with 5v

[@thevanveeran6759]

okay, one more question, my door immediately closes after it opens, after the motion sensor is triggered, the servo motor rotates 180 degree and immediately returns to the its original position, what should i do ?

[@craftoast]

u must configure the delay of pir sensor, u can watch any video on yt how to configure pir motion sensor, and there will two potentiometer present, one of them is delay and another is sensitivity, so take care of that

[@aliwani8059]

SAME!!!

[@shanana8795]

Hey brother, I really like your project. It works with my laptop power, but the servo does not move with 9v battery power. Can you help what the issue is?

[@craftoast]

Probably your 9v battery must be dead or have less power, so basically use another power source like power bank, or a try with a new battery, but 9v battery are many times of not good quality there's a possibility that it won't work with a new one also, but u can still try with a new one 😃

[@mayankshukla7821]

great bro keep going

[@craftoast]

Thanks Brooo

[@tnlovely5014]

Anna நாக ஒரு robot project பன்னி இருக்கோம் அந்த robot ட்டின் கைல யாரவது முன்னாடி வந்து நின்னா sensor மூலியமா அவுகள டிடக்பன்னி welcomeனு சொல்லனு anna அதுக்கு என்ன தேவைபடும்

[@sethunthunder]

Noice project but now why do we need a door unless this system works for the inside not outside

[@saramendez4991]

it workes from the inside

[@bissanschool9441]

VERY BEUTIFUL

[@saranyabalasankar6568]

The Useful and Best 👍🏻👍🏻

[@craftoast]

Thank you 😊

[@nikhilkothiyal]

Plz help, I have to change the code for connecting to 5V?

[@craftoast]

No u don't have to change the code for this

[@nikhilkothiyal]

@@craftoast OK thank you, plz also tell is i have to connect both servo and pir together to 5V instead 3.3V plz reply

[@craftoast]

@@nikhilkothiyal connect servo to 5v and pir to 3.3v that would be better

[@craftoast]

If u can connect both to 5v, that would also work if u have a breadboard then u can do it with it

[@nikhilkothiyal]

@@craftoast OK, it Will work?

[@farzanaakter3561]

I'm facing the," compilation error: 'myservo' was not declared in this scope" I am using the, * Arduino Duemilanove * SG90 Mini Gear micro Servo Motor 9g *Hc-SR510PIR Motion Detective module.

[@craftoast]

💀 sorry for very late reply, but ig u might have missed few lines in very starting of the code where i declared this variable "myservo"

[@AtharvaChavan-z6r]

hii my project is same like i used pir sensor and servo moter and make automatic gate , but i have to show the output or gate is open or closed on website or any app help me or give idea

[@craftoast]

Hey there, you can use blynk app to connect your project with your phone, but for that, either u have to use a Bluetooth module or a nodemcu board instead of Arduino which has wifi module, but ofc then u have to do changes in your code accordingly...

[@aashma03]

What is the price of the given product? can you mention the price plz

[@shiroumxm2052]

can you put 2 servomotor in serie to open 2 doors¿¿ i wanna make a Moria Door diorama..wich are actually 2 doors that make a big one.. i want to controll them by voice so when you say the elvish word "friend" it opens and elvish characters shine

[@theotris665]

sorry for bothering i want to ask you i did the same as your vid but my servo is running continuously without stopping can you help me with that

[@renlaire]

same problem have you fixed it if yes what did you do?

[@mareeswaranvp8171]

@@renlaire same problem pls reply if u did it

[@neelambika.mpatil8480]

it will open only for human enter or any animals?

[@craftoast]

We have used a motion sensor, so any motion whether by a human or animal in the range of sensor, it will detect and open the door

[@sanyarungta7335]

Hello sir, can you please help me with how to use esp8266 instead of Adruino. Will the code be same?

[@kushalkush324]

hi. am doing a miniature project for a temple. need to design a door opening and closing 90 deg by button/ sensor. its a double door. like a window. can u pls help me on this. I have already used Arduino but facing issues with the programming. I need to use two servo motors. requesting to revert back

[@craftoast]

Hey! , Yes you have to use two servo motors, see in the code it's just really simple, what you have to do is copy paste the code of 1st servo motor for the second one, but the main thing is angle u have to use opposite of the angle of the first servo motor, if initial is zero and final is 90 for first servo then for second it has to be zero and -90 if u don't wanna change the angle, just change the position of the servo motor with respect to the first one

[@craftoast]

If you like my work then pls subscribe 🤡

[@dhzlkhaa23_]

hi can i know what kind of jumper wire that u use?

[@gayathrimuthammalmp1351]

Thank you bro

[@shahrulnizam1478]

hi sir can we change servo motor with stepper motor that have been in CD room pc?, please help me sir..tq

[@craftoast]

Yeah u can use but then u have to code it different

[@rafaelmarquez9107]

Hi do you have schematic diagram and 3d can you upload it thankyou

[@Jo-lr5pk]

hi what did you plug the usb into for power?

[@craftoast]

Power bank

[@abdullahsohail814]

Pir sensor did not detect the motion accuratly why?

[@craftoast]

Try configuring the pir sensor, it has two potentiometer try configuring them

[@abdullahsohail814]

@@craftoast okay I will try then if I feel some problem then I will contact with u

[@lorenamirashi7965]

Hii👋 Sorry for bothering you. I'm doing a project about creating a smart door using PIR motion sensor. I have made all the steps including the connections with arduino uno. When I connect arduino uno with my laptop it turns on, but i don't understand what you do with the codes. Can you please help me? I would apriciate it a lot.

[@craftoast]

Hii, so u need to do the connections according to the code, u can get the file down the description, u need to use same digitapins and all

[@craftoast]

If you have any query, u can straight dm me on insta...hehe

[@ayushimaurya5590]

@@craftoast 🎊

[@زيدمراد-ش4ل]

Hello i would like your help please.. My servo motor keep turning back to normal position even when my hand on the sensor and i did the same code as you can you help me fix it please..

[@craftoast]

try now i have done a lil change in code with the same link

[@زيدمراد-ش4ل]

Thank you for your fast reply Unfortunately it didn't work still turn back to normal position my university project depends on it still open😅😅

[@زيدمراد-ش4ل]

I want it to stay open when the sensor see's movement and closes when the movement goes can I do it with this type of sensor

[@craftoast]

@@زيدمراد-ش4ل yes you can do with this sensor

[@زيدمراد-ش4ل]

@Craftoast that would be awesome can you please show me how can I do it because I tried so hard but unfortunately I failed..

[@ElfaCarvalho]

Can the Arduino run without pc connection?

[@camillecruz4804]

Hello! Would like to ask what app are you using for the code? Thankssss! 😃

[@craftoast]

It's called Arduino IDE

[@liedefis7557]

whether the cable is male to male or female to female?

[@craftoast]

@@liedefis7557 It depends on situation, for eg: if it's for breadboard to Arduino then u may use male to male, but if you're using from pir sensor to Arduino then u may use female to male.

[@liedefis7557]

@@craftoast what do you use?

[@user-hw7om1mm4j]

excuse me permission to ask I have followed with your Vedio but the servo moves by itself even though I have followed from your Vedio can this solve this problem?

[@adamperts9404]

yeah, mine is doing that to

[@mgcwizard1808]

Badhiya ha

[@craftoast]

Thank you brooo

[@badbamboo2292]

nice

[@zmnbc]

Can i use ultrasonic sensor instead of motion sensor?

[@craftoast]

Yes but ofc the code will be different for ultrasonic sensor

[@pokssy5995]

Hey can i use a ultrasonic detector?

[@craftoast]

These for sure, but the code used for ultrasonic sensor is different so the code i have give won't work

[@nasrinaktershimu8000]

Can you tell me the mode of pir sensor used here?

[@mareeswaranvp8171]

hiii

[@nanditabhardwaj4482]

Agar koi pet animal room ke andar enter kregaa to bhi door automatically open ho jayega???? Plzz reply me 🙏

[@craftoast]

Yes ,any movement in the range of the sensor it will open.

[@lorinlorin5626]

Hi Please i do the same code and same realisation but in the monitor stay appear 1 even thought the movement not detected, do you know what The problem? Thank you

[@craftoast]

You might have not set the potentiometer on the sensor correctly , you must knowing one is for sensitivity and other is for distance/range , any of the potentiometer would be at the lowest point and that's why it is detecting very short and near movement as well

[@craftoast]

You can see any video on KZbin how correct the position of potentiometer, this same thing happened with me when used it first time

[@lorinlorin5626]

OK thank you

[@lorinlorin5626]

Hi I solve problem of the pir sensor but he is working just with 5 v not with 3. 3 v and the servomotor does not working when I make the pir sensor in 3.3v

[@craftoast]

@@lorinlorin5626 no problem you can give both of the components 5v supply

[@esha1146]

Nice work :)

[@craftoast]

Thank you 😊

[@gelatinskeleton8745]

I love this.

[@craftoast]

Thanks 🤡

[@yashchauhan1379]

great work!

[@craftoast]

Thank you 😃🙌

[@PrajapatiKishan86]

Is project ko konse application me run karna hai ,kaha se milega vo application

[@craftoast]

its called arduino ide, you simple search it on internet

[@ruhihasan_rajeswarinag5623]

what would be the output of that code can you plz tell me

[@goldisingh6388]

nyc

[@user-tc8db3mw2p]

can you show the pir sensor setting

[@shreepadvichare1612]

Can u please gave me version of your ardino idle

[@applejuiceisyummy]

hello why is the code isnt working?

[@samruddhideokar2387]

I want this project for final capston project

[@vidhya7069]

Where we want to upload the code bro?

[@aiamharsha]

❤️❤️

[@craftoast]

Thank uuuu😊

[@alexisgarcia9310]

with how many volts you feed it

[@craftoast]

Just use normal voltage supplied by your laptop, i used my laptop as power source if u talking about the sensor or servo, i used 5v with servo and 3.3v with sensor, i must have mentioned it in video prolly, hope it might helped

[@alexisgarcia9310]

@@craftoast ok thanks but i followed all the steps and it doesn't work for me! how can I do ?

[@craftoast]

@@alexisgarcia9310 what's the issue ur facing

[@alexisgarcia9310]

@@craftoast nothing works for me

[@alexisgarcia9310]

and I already checked several times

[@SoraEh]

Help, the program failed to upload

[@ramsiva7080]

Bro code was not working Plz can u help

[@storiesofthecentury]

the motion sensor is taking all the power

[@terrencesoriano7901]

where's the introduction for this?

[@aizalnazmi526]

why sensor not working

[@ishakasaraneni8619]

Please can i have code for this project 😢

[@siddheshwagh2300]

Simulation for this?

[@SantheriBhat]

Bgm ayichu tharoo bro

[@prawnydagrate]

please help my pir sensor is going crazy

[@sky_walker118]

Where is battery connection?

[@syakxoxo]

Cannot open codee

[@haddadwassila7442]

Merci

[@royalsisodiya182]

Bro kharch kitna ayga

[@craftoast]

The most costly item is Arduino board, so u have to plan accordingly if u r using nano it will be cheaper than Arduino Uno, if u want products at cheaper rate then try websites like, zbotic or Electronicscomp, robo elements, product at Flipkart and Amazon are very expensive

[@jacqiemedez8842]

Where's the code?

[@craftoast]

Description...

[@adityajadhav5353]

Can you give me your GPay or Phone pe? I just want to appreciate you and show support 😊

[@LIMMEILINMoe]

DIAGRAM PLEASE

[@princebaba3477]

Sir program plz send me

[@shriyaalgamerbg3485]

Please help me brother i have project on it is showing error: problem uploading to board ... what is the problem brother or how can i contact you please help

[@kashishpatil6678]

Is this fake or not?

[@craftoast]

Ofc its real :_)

[@mareeswaranvp8171]

heyyy did u do this project pls let me know if u did

[@badioussineh]

FAKEH

[@ACSrobotics-wp3dv]

[@karvinkennethidor3438]

hello i cant dm you on insta

[@projectl-r1u]

this project is very good

[@sanyarungta7335]

Hello sir, can you please help me with how to use esp8266 instead of Adruino. Will the code be same?

[@BERYNWONG-gj7yc]

why the pir sensor cannot detect the motion?