Smart Home Malaysia #8 - Sonoff 12V WiFi Smart Switch Autogate

[@disketmy]

Kalau tambah new device ke akaun yg dah link ke home control tak perlu unlink dulu tuan. Just "ok Google, sync my devices" dah boleh.

[@SmartHomeMalaysia]

👍 terima kasih tuan for the tips

[@phlizzow]

Terima kasih tuan.. saya dh berjaya pasang. Yahoo!!!!

[@SmartHomeMalaysia]

Tahniah 👍👍👍

[@joeblack02051999]

Hi Mohd Faizal, thanks for sharing. :) I have question, can we just use the RF bridge, pair it with the autogate remote? I am trying that setup (bridge + remote) but it does not work (can learn from remote, but gate not open). Thanks in advance.

[@SmartHomeMalaysia]

Hi Ferry Ong thanks for watching. With the autogate probably it won't work. Sonoff RF bridge not support to learn rolling code and dynamic code. This remote usually used with autogate for extra security feature.

[@anip137]

Hi.. If ur autogate is DC motor it can't pair with sonoff bridge . I found 1 video , he using sonoff pow 2 + few diy & setup to add learning code. kzbin.info/www/bejne/nXipfKh4ibSnf9k

[@areankim]

Hi, Sonoff basic now has inching mode, can use sonoff basic to do garage door open?

[@SmartHomeMalaysia]

Possible, but you need to do hardware hacking to your sonoff basic. What we discussing in this video is dry touch switch which is different function from sonoff basic.

[@smkchukaipantauchukai6541]

gate saya sliding... guna board 3 speed technologi sliding panel.... dc.... saya tengok ada satu point Aux relay di situ..... utk 12 v tu nak sambung di mana?

[@SmartHomeMalaysia]

Gate ada push button utk buka gate? Cuba follow wiring dari situ

[@chorchor2336]

Hi Mohd Faizal, Thanks for sharing the video, I did try with the autogate DC moto(GFM925W), it seems to be not working, I have two cables connected to autogate board (one common and another always open), after pairing to ewelink, only can control one door (Left) open, and the indoor push button no longer function after terminated with sonoff board. after restoring the original cabling by removing the sonoff board, the indoor push button back to normal. Any idea? could it be the cabling issue? I traced the cable at the indoor push button, it shows the different one to the autogate board (for open/close).

[@SmartHomeMalaysia]

Good rule of thumb for me is always following the touch button wiring.

[@erfan_muhammad]

kzbin.info/www/bejne/jpXUeKh9iNx0gdk Same model. Do refer this One. Should be working

[@ferio9849]

Askum, baru set sonoff wifi gate switch, tapi bila connect dgn google home, tak sama mcm klu guna ewelink, ada setting salah ke kat google home. bila guna google bunyi click 2x

[@SmartHomeMalaysia]

Waalaikumsalam....selalunya kat Google Home dia just sync device tu...xda setup dah. Kalau extra setup samada dekat ewelink atau pun board tu sendiri.

[@donapex7409]

I bought the wrong one laaaaa 5v.. boleh guna utk function autogate ni x?

[@SmartHomeMalaysia]

Can...you have to get another power source which is 5v or get a voltage stepdown module.

[@liewliew8740]

@@SmartHomeMalaysia where to get the stepdown module?

[@SmartHomeMalaysia]

@@liewliew8740 you can find it from online. DC-DC Buck Converter Step-Down Power Module

[@liewliew8740]

@@SmartHomeMalaysia in the board it is stated as ac/dc 7 - 32V, can I just plug in the 12v eventhough input stated is only 5v?

[@sharzanco]

Don Apex BANGGOOD

[@zam_ii]

Then sonoff board tu tergantung je dalam box tu? Xde effect ke hujan (humid) panas ek?

[@SmartHomeMalaysia]

For my case, yes..saya biar tergantung macam tu. So far alhamdulillah xda issue. Just kena pastikan dia jangan tersentuh dengan board gate sudah..nanti boleh short circuit. Control board gate boleh survive, In Shall Allah dia pun okay.

[@bernardw74]

Hi Mohd, I noticed that the switch only operate by 'switch-on' and 'switch-off'... can the gate be stopped halfway? Tq

[@SmartHomeMalaysia]

Yes, by clicking the switch (in the apps of physical switch) before it open all the way.

[@mohamadhajiyusop4316]

slm tuan.boleh pakai utk auto sliding gate kah?

[@SmartHomeMalaysia]

Waalaikumussalam.. In Shaa Allah boleh

[@yappying]

hi bro, i punya remote control board tak nampak COM port, biasa mana nampaknya?

[@SmartHomeMalaysia]

COM port selalu kat tengah (between NO and NC)

[@ayiep8]

I have s3 boaard swing gate. Are they compatible to this product? Can you give me the link for product? I want to purchace it.

[@matchut]

Successfully connected to S3 board. GND = COM terminal

[@SmartHomeMalaysia]

Believe, I had include in the description.

[@edekayu2339]

Boleh guna lebih dari satu telefon x??

[@SmartHomeMalaysia]

Boleh. Install apps eWelink

[@thkeith]

Hey, do you have a wiring diagram to where I put the Sonoff WiFi switch on the control box?

[@SmartHomeMalaysia]

Hi Keith Tan, I do not have wiring diagram/schematic. There are many variance of the board so it might differ. If you have push button switch then you might follow the same wiring.

[@azmeerroslee4517]

Assalamualaykum tuan, boleh guna ni tak utk option buka satu pintu sahaja. Atau kena guna yang 2 channel?

[@SmartHomeMalaysia]

kena pakai 2 channel, tapi dua channel setup lain sikit sebab dia pakai AC

[@drdykes]

Mohd Faizal Mhd Gazali ada buat video tutorial untuk autogate 2 doors swing tak?

[@SmartHomeMalaysia]

@@drdykes ini video 2 door swing tuan

[@drdykes]

Mohd Faizal Mhd Gazali oo silap soalan, boleh bagi setup untuk 2 channel? Sebab autogate saya ada option untuk buka satu pintu. Terima kasih

[@SmartHomeMalaysia]

@@drdykes ...baik...untuk kemudahan berdasarkan apa info yang kita ada sekarang berpandukan kepada video di atas, tuan dapatkan dua board 12V inching switch. Satu set utk 2 door, satu lagi set utk 1 door. Kalau pakai set dua channel panjang ceritanya tuan.

[@thiantakjeffreytan4008]

Bang , I just install, tapi voice command buka dan tutup hanya Boleh pakai google, turn on the gate. But I said turn off the gate dia tak tutup

[@SmartHomeMalaysia]

Sebab the switch in inching mode. It will ON for couple of second and then it goes back to OFF state. Jadi setiap kali nak buka atau pun tutup gate, the command will be always switch on gate or turn on gate.

[@peterlim2301]

Can I use the Basic Sonoff for controlling the autogate?

[@SmartHomeMalaysia]

Technically yes, but you need to do some hacking to the PCB.

[@touchlessgatessrinagar5408]

Can you help me with this device

[@SmartHomeMalaysia]

How can I help you? What is the issue?

[@yukkitabelajar8605]

boleh nak pasang ke batery bank 12v 100ah?

[@SmartHomeMalaysia]

Nak pasang utk board tu? Kenapa tak ambil power dari autogate saja?

[@juresyahya]

Salam Tuan..guna mode mana satu, inching ke self-locking?

[@SmartHomeMalaysia]

Salam Tuan...inching mode

[@mohdnizammdsaidful]

Dah guna..mudah dan mmg puas hati..rasa mcm tony stark..haha

[@SmartHomeMalaysia]

Haha...betul 👍👍👍

[@adith1998]

Can it be used by 12v, 42ah dc battery

[@SmartHomeMalaysia]

Yes, for me no issue.

[@singlespeedss5617]

Hello, boleh guna untuk semua jenis autogate? Autogate saya sudah 20 tahun lebih.

[@SmartHomeMalaysia]

Saya xsure, saya punya autogate baru nak masuk 8 tahun. Tapi kalau you boleh tengok autogate board mungkin sama, you boleh follow the steps. Tapi sebarang kerosakkan I tak boleh bertanggung jawap ☺.

[@areankim]

anyone update to v3.4.1? i updated and the device now blinks 4 times kenot pair kenot connect. haiz... any help?

[@SmartHomeMalaysia]

@Arron Ng sorry...I have not yet update to v3.4.1. Probably need to reset and setup again.

[@areankim]

@@SmartHomeMalaysia may i know how to reset? the device can not go into pairing mode anymore, it keep blinks 4 times. I think its bricked.... aiksss

[@hafiezamaniahmad3165]

Lagu ko annoying la bro. Suara ada tenggelam sikit. Tapi ilmu bagus

[@SmartHomeMalaysia]

😅 nanti kita tak include lagi music tu 👍🏻

[@neoseven07]

hai can you do for the air conditioning

[@SmartHomeMalaysia]

For air conditioning, I am using universal remote Broadlink RM Mini 3. It is also can be integrate with Google Home. You can check out my video #4 and #5.

[@acaphamzah]

Untuk power boleh pakai ac atau dc ke?

[@SmartHomeMalaysia]

Untuk board ni saya pakai DC 12V..sama power dari auto gate board.

[@liulipwei2022]

Abang ini sonoff Boleh connects remote control 433mh boleh tak

[@SmartHomeMalaysia]

Yang ni tak boleh

[@shubhashinimanikkandhan8047]

kalau pasang kat switch autogate dalam rumah boleh tak?

[@SmartHomeMalaysia]

Kalau utk rumah saya switch dalam rumah xda source 12v...so xboleh nak pasang.

[@mnaaimf]

Salam bro..kalau blackout kena pairing semula ke sonoff ni? Sebab saya punya sonoff dah tak de connection dah dlm ewelink.

[@SmartHomeMalaysia]

Tak perlu add semula selepas blackout bro

[@muhammadshamri6412]

kena ade wifi ke tuan

[@SmartHomeMalaysia]

betul kena ada WiFi

[@pengembara8016]

@@SmartHomeMalaysia Bila ada wifi dh tentu nk kne ada modem & modem tu pulak mesti nk kene on 24 jam, x gitu ke tuan...?

[@SmartHomeMalaysia]

@@pengembara8016 betul tuan.

[@zacfauzi]

Salam Faizal..mana nak beli ye. Saya Google tak jumpa yg 12v..boleh bagi link? Terima kasih

[@SmartHomeMalaysia]

Waalaikumsalam tuan..saya beli dari sini www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html. Rasanya kalau Google inching self locking switch patutnya boleh jumpa..👍

[@mohddinie705]

Salam Tuan, masalah saya ialah autogate saya bukak sebelah saja, macam mana nak bagi boleh bukak 2 belah, terima kasih

[@SmartHomeMalaysia]

Waalaikumsaalam...dalam autogate board ada dua terminal, satu single sided yang satu lagi double sided. Kena connect dekat double sided.

[@mohddinie705]

Mohd Faizal Mhd Gazali saya dah jumpa masalah dia tuan, saya pasang wayar terbalik, pasang dekat NC patutnya NO, terima kasih tuan

[@SmartHomeMalaysia]

@@mohddinie705 Alhamdulillah

[@rosnanibrahim]

Salam Faizal. Saya ada masalah selepas pasang card sonoff inching card. Secara apps tak ada masalah tapi remote tak boleh pakai. Pada motherboard saya sambung ke 2Sides ke NO di sonoff. Pls bantu . Tq

[@SmartHomeMalaysia]

Kemungkinan wire/connection remote longgar/tak kemas. Saya tak dapat nak tengok board tu jadi saya susah nak bagi komen.

[@rosnanibrahim]

@@SmartHomeMalaysia Dah OK. Masalah selesai. Card sonoff saya jarakkan dari remote box. Tkasih Faizal

[@SmartHomeMalaysia]

@@rosnanibrahim Alhamdulillah

[@smkchukaipantauchukai6541]

bagaimana nak menghubungi tuan?

[@SmartHomeMalaysia]

chat.whatsapp.com/BWSap1lnyoqGTKM5SVbbvX boleh ke sini

[@jiknenloh48]

Hi there, helpful to see this video. I just checked that my swing gate is using the A4 board as shown in link below: my-live-02.slatic.net/p/129cb5b70a18a7f5b04745100069ad70.jpg by looking at the photo can help me to identify if there is a DC output for the Sonoff switch?

[@SmartHomeMalaysia]

Hi Jik Nen Loh, thanks for watching. Okay, for DC you can get it from the spare battery or 12V terminal on the board (between COM and Motor A terminal). Best practice is to double check with multi meter. I could not be responsible for any damage to your board or any other related equipment :)

[@jiknenloh48]

@@SmartHomeMalaysia thanks for the suggestion. Have try on the 12v with com connection and I'm getting the power. Now the switch work like charm. Thanks 😊😊

[@SmartHomeMalaysia]

👍🏻👍🏻👍🏻

[@bhq8702]

music kuat sangat bang

[@SmartHomeMalaysia]

Baik...video saya yang terbaru saya rendahkan volume music

[@bhq8702]

@@SmartHomeMalaysia tq bang

[@pengembara8016]

Betul tu. Suara perlahan tp muzik latar agak kuat seolah2 mcm nk suruh kami dgr muzik sdgkan kami nk dgr apa yg dsampaikan...

[@airviewlab]

Buat tutorial lagi blh. Lagu bising sangat

[@SmartHomeMalaysia]

In Shaa Allah.

[@ammarsyah8877]

Bising lagu

[@SmartHomeMalaysia]

Maaf....tapi masih boleh dapat tak macam mana nak buat smart auto gate?