Smart Irrigation System using Arduino Uno

Smart Irrigation System | Arduino Projects | IOT Projects
This experiment is about Smart Irrigation. Using this method we can avoid watering the plants manually. We need to place the Soil Sensor in the Soil. When the soil is dry, the pump will turn ON automatically. When the soil is we, the pump will turn OFF automatically.
Required Components
==================
1. Arduino Uno
2. Soil Sensor
3. DC Water Pump
4. Relay
5. Connecting Cable
6. Male to Male Jumper Wires
Components Link
===============
1. Arduino Uno - robu.in/produc...
2. Soil Sensor - robu.in/produc...
3. DC Water Pump - robu.in/produc...
4. Relay - robu.in/produc...
5. Connecting Wires - robu.in/produc...
Software Required
===============
1. Arduino IDE - www.arduino.cc...
2. Programming Language - C Language
Source Code
==========
github.com/Tec...
Reference Video of Arduino Experiments
======================================
1. Remote Control LED
• Remote Control LED usi...
2. Electronic Voting Machine
• Electronic Voting Mach...
3. RFID Security System
• RFID Security System u...
4. KeyPad Security System
• KeyPad Security System...
5. RFID Integration with Arduino
• RFID integration with ...
6. Distance Measurement using Ultrasonic Sensor with LCD/I2C
• Distance Measurement u...
7. Gas Detection Alarm
• Gas Detection Alarm
8. Weather Station Web Server
• Weather Station Web Se...
9. Arduino Calculator
• Arduino Calculator | A...
10. Smart Notice Board
• Smart Notice Board | I...
11. Simple Covid Tracker
• Simple Covid Tracker u...
12. NodeMCU Setup and Blink LED
• NodeMCU Setup and LED ...
13. Ultrasonic Radar
• Ultrasonic Radar using...
14. Fire Detection Alarm
• Fire Detection Alarm |...
15. Soil Moisture Measurement
• Soil Moisture Measurem...
16. Voice Controlled Light
• Voice Controlled Light...
17. Object Detection Alarm
• Object Detection Alarm...
18. Wireless Notice Board Using Arduino
• Wireless Notice Board ...
19. Automatic Visitor Counter
• Automatic Visitor Coun...
20. Rain Alarm System
• Rain Alarm System | Ar...
21. Dancing Light
• Dancing Light | Arduino
22. Control LED using Sound
• Control LED using Soun...
23. Traffic Light Controller
• Traffic Light Controll...
24. How to Control a Bulb using Mobile?
• How to Control a Bulb ...
25. LED Chaser using arduino uno
• LED Chaser using ardui...
26. Distance Measurement Using Ultrasonic Sensor
• How to measure Distanc...
27. How to Display Text in LCD Display using Arduino Uno | English
• How to Display Text in...
Previous Vlogs
============
1. How to Type Tamil/Malayalam in WhatsApp | Native Languages in WhatsApp
• How to Type Tamil/Mala...
2. Gmail Features | Tamil
• Gmail Features | Tamil
3. Gmail Keyboard Shortcuts
• Video
4. SQL Best Practices - Part 1
• SQL Best Practices - P...
5. Cheap and Good Quality Wireless Earphones | boAT Wireless Headset
• Cheap and Good Quality...
6. Popular Brands and their Abbreviations
• Popular Brands and the...
7. Healthy Snacks That Can Help You Lose Weight
• Healthy Snacks That Ca...
8. This is the only way to reduce many illnesses
• This is the only way t...
9. How to monitor your body weight and fat?
• How to monitor your bo...
10. Is Tea or Coffee good for you? | Which is the healthier drink?
• Is Tea or Coffee good ...
Music: www.bensound.com
♥ Facebook: / techtrendsshameer
♥ Instagram: / tech_trends_shameer

[@robsonlima3529]

Very cool! Tips based on my own experience: replace the soil moisture sensor from resistive to capacitive (the resistive will oxidize in a few days); include a volume sensor to monitor the vessel water to prevent the pump from continuing to run out of water and damage when soil moisture is low and the vessel is out of water.

[@TechTrendsShameer]

Thank you for the feedback. I will try the suggestions you mentioned.

[@pritheshpatley4445]

Everything is working, but the motor does not stop when the soil is wet

[@tomorinagisa9398]

What should i do if the sensor and arduino work but the pump and battery not?

[@sumitbarnwal5805]

Thanks a lot 🎉

[@yaseen4003]

thank you sir soooo much

[@TechTrendsShameer]

Most welcome

[@LeeHong-d8n]

Hi , can I not use the soil moisture sensor for it to work? Just cut the wires and plant it in the soil? For differnt type of use

[@AnthonyChen-v8q]

Yes that will work, just make sure your code doesn't reference it and you'll be good

[@navyasipani6360]

Do i have to power the Arduino seperately and with how much volt

[@TechTrendsShameer]

You can use power banker.

[@navyasipani6360]

@@TechTrendsShameer can I give power from usb port 🤔

[@AyushiSharma-u5v]

Sir i bought a 4-channel relay by mistake can the same circuit work on 4-channel relay as well

[@TechTrendsShameer]

Yes it will work. Use only one relay from that.

[@bkcganeshblogs]

Sir Map function we use 10 ,550,0,100.But why code you have written 550,10

[@indukumari193]

What makes motor to start automatically when soil moisture level is not upto the mark?... Is it bcz of relay or bcz of some algo? Please ans

[@TechTrendsShameer]

It's based on the relay

[@ashwinikheur4143]

Give him a 2k he is asking for help

[@ashwinikheur4143]

The connection are fine but the water is continuously flowing.Is there any issues

[@TechTrendsShameer]

Check the relay connection.

[@kenjeffrey2153]

Good demonstration. Please can I have the code for this project? Mine is not working.

[@TechTrendsShameer]

Please message me in instagram.

[@ashwinikheur4143]

Give him 2k he is asking for help

[@ashwinikheur4143]

He is making everyone idiot by leaving a bug

[@tohelpothers9767]

good sir , one question sir why do you not connect the pump from gpio directly to Arduino as it gives 5v

[@TechTrendsShameer]

Thank you. I tried that, but my pump is not working when I connected like that. That's the reason I gave a separate supply to the pump.

[@ashwinikheur4143]

He is asking for 2k for helping

[@criminalgaming301]

Nice nice

[@TechTrendsShameer]

Thank you.

[@408-mohdmehraj6]

Can i give direct power supply to arduino ? Without a battery ?

[@navyasipani6360]

@TechTrendsShameer sir i dont have adaptor to power the Arduino 😅 want else can i do please help

[@TechTrendsShameer]

You just need a USB cable to power up the Arduino.

[@saikrishnapotharaboina5517]

Why we use 9v battery to 5v water pump we directly connect to Arduino

[@TechTrendsShameer]

The operating voltage for the pump is 2.5 to 6 V. It is not working with the power supply given from Arduino. So I am using 9V external battery. Please try without battery and if its working for you, you can avoid battery.

[@saikrishnapotharaboina5517]

@@TechTrendsShameer thankyou sir

[@TechTrendsShameer]

Welcome

[@stmeghla88f8]

Can you suggest me how i can get the code for this project... From the description link i didn't get any code

[@TechTrendsShameer]

Source code is there in the description. Check again.

[@cricketfan9611]

Hello I need help ​@@TechTrendsShameer

[@madhurinarlapati7698]

can u plsss where the battery is connected

[@TechTrendsShameer]

Please check the circuit diagram mentioned in the video description.

[@kavithaagm9924]

In my relay there is input no output

[@Abhiraj669]

Sir code from the video description is not working and also the link to the website how to get the code sir

[@TechTrendsShameer]

github.com/Tech-Trends-Shameer/Arduino-Projects/tree/main/Smart-Irrigation-System

[@true_lover_satish19]

Yah project mujhe de sakte hai

[@TechTrendsShameer]

Yes.

[@cricketfan9611]

Hello i need help

[@TechTrendsShameer]

Tell me. What can I do for you?

[@cricketfan9611]

@@TechTrendsShameer nevermind i fixed it my relay was faulty lol

[@pradeeppaste3385]

//Tech Trends Shameer //Smart Irrigation System int sensor_pin= A0; int output_value; void setup(){ pinMode(3, OUTPUT); Serial.begin(9600); Serial.println("Reading from the Moisture sensor…"); delay(2000); } void loop() { output_value= analogRead (sensor_pin); output_value= map (output_value,550,10,0,100); Serial.print("Moisture:"); Serial.print(output_value); Serial.println("%"); if (output_value

[@sarikachougule1576]

How did you get this?

[@kavithaagm9924]

Code is error

[@TechTrendsShameer]

Send me the error message.

[@kavithaagm9924]

Where is the code sir

[@TechTrendsShameer]

Check video description.

[@AditiGharge-po4gc]

My project is not working

[@TechTrendsShameer]

Any error ?

[@pritheshpatley4445]

you could try using a different version of Arduino uno ide download. I used version 1.6.7 download.

[@praveenkumarnarike2130]

Bro please share the code bro

[@TechTrendsShameer]

Check video description

[@marciano.abrantes2564]

Hello sir can you paste here the code ? The file can't be view

[@TechTrendsShameer]

github.com/Tech-Trends-Shameer/Arduino-Projects/tree/main/Smart-Irrigation-System

[@vanishreebalakrishna1279]

should'nt the arduino be connected to the battery?

[@TechTrendsShameer]

I gave a separate supply to Arduino

[@biswajit5825]

I tried and it's working opposite what should I do plz help

[@TechTrendsShameer]

Can you please tell me how it is working?

[@biswajit5825]

On supplying power it turns on for a seconds then it turns off then on putting the moisture sensor in moisture area it's turning on and when putting it on dry soil it turns off... What should I do?? Have I made a mistake?

[@amulya_minnie3387]

Same problem. What to do sir?

[@TechTrendsShameer]

Can you please contact me in Instagram? instagram.com/tech_trends_shameer/

[@TechTrendsShameer]

Can you please contact me in Instagram? instagram.com/tech_trends_shameer/

[@neelsarkar5468]

the motor didn't off automatic ....you have used a switch to on off the motor...

[@khadijabatool786]

Nahi

[@mjmohamed4798]

Can i use this code for esp8266

[@TechTrendsShameer]

This code is for Arduino Uno. For ESP8266, you need to change the code.

[@melanycondoricanaviri6603]

Hola sera que me puede ayudar con los codigos porfavor

[@TechTrendsShameer]

Please check video description

[@prashantkhot9576]

I want source code.

[@TechTrendsShameer]

Check the video description for source code

[@sljaneeshabro1320]

👍

[@TechTrendsShameer]

Thanks

[@vaishnaviS13]

Can i get the code??

[@TechTrendsShameer]

Check video description.

[@sushmac8399]

Sir y cnt I download the code. Can u plz hlp me

[@TechTrendsShameer]

Can you please click the link provided on the video description?

[@sushmac8399]

I hve checked it. Its nt working. Can u plz provide me again if u dnt mind

[@TechTrendsShameer]

Please check this link drive.google.com/file/d/16wDnszv7pwPHLXg9iSZfxY5LyF88QHlB/view?usp=sharing

[@K-Solos]

Sir can u type the program

[@TechTrendsShameer]

Program included in the video description

[@AtherKhan-cv5wi]

Bro my relay is not getting power

[@TechTrendsShameer]

It might be defective

[@AtherKhan-cv5wi]

Your circuita are good But coding has some fault

[@TechTrendsShameer]

May I know which line has fault?

[@AtherKhan-cv5wi]

Int relayPin = 4; int sensor_pin = A0; int output_value ; void setup () { Serial.begin(9600); pinMode(relayPin, OUTPUT); pinMode(sensor_pin, INPUT); Serial.println ("Reading From the Sensor ..."); delay(2000); } void loop() { output_value = analogRead(sensor_pin); output_value = map (output_value, 550, 10, 0, 100); Serial.print ("Moisture : "); Serial.print (output_value); Serial.print ("%"); if (output_value < 20){ digitalWrite (relayPin, LOW); } else { digitalWrite (relayPin, HIGH); } delay (1000); }

[@TechTrendsShameer]

send me the screenshot in instagram.

[@jameskarla.lagman1042]

can I have the code

[@TechTrendsShameer]

Please check the video description.

[@johnmarknakka7897]

Sir how can I get a code

[@TechTrendsShameer]

Hi, Please message me in instagram.

[@johnmarknakka7897]

@@TechTrendsShameer ok sir

[@hariprasad6615]

@@TechTrendsShameer id

[@LinaAlKubaisi-sk6lu]

hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiin ]

[@TechTrendsShameer]

hi

[@Abhiraj669]

Sir pls paste the code

[@TechTrendsShameer]

please check video description.

[@tigarmy1155]

Bro Arduino uno program

[@TechTrendsShameer]

Please check video description

[@divyasri778]

It is not working

[@TechTrendsShameer]

What's the error

[@PoojaPanwar-wy2ep]

Sir aap Hindi mein nahin bata sakte ho kya

[@sarveshwaran9071]

Sir the motor is not working after connection what can I do i have connected as per the circuit diagram

[@TechTrendsShameer]

Check the power supply is good and also make sure the battery is good.

[@AtherKhan-cv5wi]

Int relayPin = 4; int sensor_pin = A0; int output_value ; void setup () { Serial.begin(9600); pinMode(relayPin, OUTPUT); pinMode(sensor_pin, INPUT); Serial.println ("Reading From the Sensor ..."); delay(2000); } void loop() { output_value = analogRead(sensor_pin); output_value = map (output_value, 550, 10, 0, 100); Serial.print ("Moisture : "); Serial.print (output_value); Serial.print ("%"); if (output_value < 20){ digitalWrite (relayPin, LOW); } else { digitalWrite (relayPin, HIGH); } delay (1000); }

[@مسلسلعندمايكتملالقمر-ي4و]

4:39