Thank you, awesome video! This is exactly what I was looking for!
@ttucci215 Жыл бұрын
I have a older taco without the common. For each zone. I see a com and 24v fitting on the side but there is only one. Is that the common I need to connect to and if so can I connect two thermostats to that one fitting since I have 2 separate zones and pumps. Sorry it is hydronic baseboard heat. Thanks in advance for any help.
@shielduniversity419 Жыл бұрын
The common of the thermostat goes to common on the taco panel. You can use more than 1 common on terminal
@ttucci215 Жыл бұрын
@@shielduniversity419 you are the man sorry I just emailed you. Seen your email in a previous comment. Thanks again.
@Aleema729 Жыл бұрын
I have an older 3 zone taco panel no c terminal. Can I use the common at the TT that goes to the thermostat splice at the thermostat and feed the c terminal for thermostat power. Since the tt terminals on the taco panel is always live with 24 volts
@ttucci215 Жыл бұрын
I have a older taco with no c wire but I ran two thermostats to mine. I ran a wire right from the top section that says c and 24v I ran a green wire from the c to the c on the thermostat then I ran red and white from each zone
@Aleema729 Жыл бұрын
Thanks for the quick reply. To clarify I have two wires at the thermostat since one of those wires is common can’t I just splice the common wire at the thermostat and use the splice for the c terminal at the thermostat and then the other part of the splice for the w terminal.
@lb51832 жыл бұрын
Nice video, I need your advice. I have Taco two zone with a relay. Was connected with line high voltage. I am reaching you to see if i could convert to install nest thermostat. I need your help.
@shielduniversity4192 жыл бұрын
Send pics to Lramirez103@gmail.com
@seiz13132 жыл бұрын
Where does the aquastat get wired in if you were to have the external hot water coil ?
@adolfoalcala73842 жыл бұрын
I only have in taco zone R W how to put with a relay the c in smart thermostat