Smartphone Controlled Arduino 4WD Robot Car ( Part - II )

[@clashfun1386]

Finally found a video that could explain easily and give product links too thanks

[@ahmadeshon9347]

Man I couldn't find this vid until now and I already bought this Arduino and couldn't make it till now thanks!

[@juancalle2328]

Gracias por tu video, resulta muy claro. Tenia dudas como se controlaban cuatro motores con un solo L298 y veo que son en paralelo

[@smitgorasiya8372]

The video is very nice I like open green energy

[@sketches2576]

You are genius

[@opengreenenergy]

Thank You

[@gamingmonts9737]

Are 2 Li Ion batteries really enough to run all 4 motors? and for how long can they run them?

[@iqkflat]

No they cant. I dont know how he managed it in the video, but you need to apply a 9V battery

[@dougruppert2794]

@@iqkflat no, only space for one

[@babingtonsullca5981]

alguien me puede decir los materiales de parte circuito que se necesitan.

[@anish3678]

Thanks sir. It really helped me. I was not able found a video that makes SmartPhone Controlled car using arduino nano. Thanks Again.

[@moeshickenyay]

Great video, nicely filmed, and music not to bad. Thanks.

[@miliismyname5464]

Hey OGE! I wanna ask you if I can use an arduino nano every instead of ardunio nano? Does I need to change anything? Does it affect in any way?

[@opengreenenergy]

Instead of nano you can use uno also. If the board uses atmega328 microcontroller, it will work. No need to change.

[@miliismyname5464]

@@opengreenenergy thanks 🙏 could you recommend an ios app for the project?

[@yashrajgaming416]

Aren't they the same thing

[@miliismyname5464]

@@yashrajgaming416 I don't remeber it but it didn't work out at that time.

[@Rctk_02]

Why my Bluetooth hc06 doesn't light up????.

[@Rctk_02]

Can u give me the code too?

[@opengreenenergy]

+Pink Anderson check the weather the wiring is correct .

[@marioalzatelopez3489]

Love u bro, this fcckng chasis is more acomplish to make than the same code of the car. XD, tnks a lot.

[@user-eo8zu2hg1e]

Amazing video! Love it!

[@joseabelbanuelosteres9710]

I did it exactly as you did, but my bluetooth module does not send the signals, why?

[@joseabelbanuelosteres9710]

I took a mega Arduino 2560, does something happen?... Sorry for my English, I'm Mexican and I like your videos

[@hasanuzzamantitow191]

I also face this problem but can not solve it.

[@Zephiroth13]

check the baud rate for the bluetooth module

[@prestonalmeida596]

José Abel Bañuelos Terés same here

[@prestonalmeida596]

My motor is nt getting on Couz he tld 2 use hc-06 but when u click the link hc-05 appears

[@Isotope1213]

your code is missing # include, is it not required to use the servo library? just curious

[@opengreenenergy]

This tutorial don't include servo.Its controlled by smartphone only. I think you are talking about this tutorial. kzbin.info/www/bejne/e3vaf6qYjbuHec0

[@Isotope1213]

Yes I definitely got the video wrong. I got another question, should I only use nano for constructing this or can I use the uno R3? cuz I have the r3 already.

[@opengreenenergy]

Bharath Kumar you can use UNO

[@syedsaud7370]

Bharath Kumar

[@jeetrajwani147]

syed saud sir .....i wanted to ask that if we order arduino nano then arduino 5v and gnd wire is available or not...?????

[@rahulmoorkoth2395]

good job, very good looking robot I have seen till now

[@tufankumar5277]

great robot car... good I am impressed.....

[@jeetrajwani147]

Instead of arduino nano we can use arduino uno or not???....plz reply fast....

[@opengreenenergy]

Yes yoyu can use it

[@bhargavimadaboina7387]

Jeet Rajwani Teja

[@xxxzatvxxx3814]

pls reply to me when i try to load the code it gives the error avrdude: stk500_recv(): programmer is not responding what can i do ? i'm sure i'm selected the true com port

[@Eaterschannel]

follow

[@0xN1nja]

Ofc

[@dilanreina7843]

This program is used for hc-05

[@shannelmoira3403]

does it work perfectly for you?i want to uload the sketch an try it out

[@aniljaiswalkalwar5617]

kzbin.info/www/bejne/g2q0Xpylos15mqc

[@ConexSpot]

This video explained all of the things i need

[@ranjanasachdeva242]

Wow wow wow Beautiful

[@energyrovers5794]

What the code I have to use for this???

[@anjumkhan1775]

professional Rovers first learn English grammar then make robots

[@jainilajmera9997]

Learning to be nice is much more important than knowing a language. He was just asking for the source code, it was understood.

[@joseraysouza]

paste.ofcode.org/7tpVMfwAUcsbPsN4BXbnpB

[@ankitpandey7386]

José Souza sir this is not opening please help me

[@mithunchandro8843]

please give me Smartphone Controlled Arduino 4WD Robot Car ( Part - II ) Arduino code.........................

[@DupczacyBawol]

Read description people!!

[@joseraysouza]

paste.ofcode.org/7tpVMfwAUcsbPsN4BXbnpB

[@mohamedkhalil7621]

send it again plz]

[@kiritlakhani4530]

Anyone needs help 7391977151 Ready to help

[@dkpdkp6171]

oooooo!!!!!! bro robotic car superbbbbb😍😍😍

[@FixitEasyDIY]

Very good ❤

[@dahianaescobar3036]

su programacion donde puedo conseguir?

[@didierdiaz2366]

en donde el profe garcia

[@joseraysouza]

paste.ofcode.org/7tpVMfwAUcsbPsN4BXbnpB

[@samirhedjal6345]

@@joseraysouza the code please your answer is incorrect Thank u

[@roshankumarjha3654]

thanks for this video because you help me make this car

[@rounakbachwani2806]

Roshan Jha, please can u help me; the car is connecting to smartphone but it is not moving. Please help me

[@saecula2391]

Thank you very much, I will try it too with c# in Visual Studio

[@Bianchi77]

Creative video, thanks :)

[@Yasiru2703]

Niyamai

[@amanjain6407]

connetion to hm hi kr lenge hm apki video isliye dekhte taki jo material ap lagate ho vo kha se or kyse banate hai yeh sikh paye

[@Rekha_PATIL]

This is nice But "DIY Projects By Sumit" Also Teaches Nice But you Explain Very Nicely

[@zachmurset9815]

i have been trying to build this car but the light on the bluetooth module dousnt turn on and blink and the code says that it is not correct. have any idea on why this is happening

[@swapandey9992]

Good. Make a Bluetooth. Robot

[@harunshals9509]

ihave made this project with arduino uno and bluetooth H05 module.. it doesnot work.. what can i do?

[@subashchander9810]

very best video

[@amanroy1412]

Can you describe about what the parts used

[@yvesfundimotula8748]

it's cool, thanks to green energy for this video tube

[@shrawanpanthi]

that''s grate,if it has wireless camera,it would be better

[@AsAs-qe6hw]

very good

[@manikcouns8986]

Nice video

[@opengreenenergy]

Thank You

[@manikcouns8986]

@@opengreenenergy Need more video like this,because I try to build a simple hidrolic robot with my team.It just cannot be compare with your robot car,your robot car is better and excelent.

[@EtherealElixir1]

superb....

[@niranjan892009]

Wow nice, I want to do this now !!!😊😊

[@ShayanKhan-nb5qr]

very nice

[@IrfanAnsari-ws7hv]

Did you configure your bluetooth hc 05 module? Mine is not getting steady led glow. It is blinking at regular intervals even after pairing with android device. What should I do? plz help

[@medhanshjagtap3479]

Wow Amazing 👍👍👍👍

[@PrajjwalNag]

Great video !

[@opengreenenergy]

Thanks...

[@vanshy8540]

Bro, your chessis is clear you can pull out the outer layer.

[@rangescorpio]

All is excellent except one thing: you have connected each two motors together... why then you call it 4WD robot? it is 2WD.. is not it? thank you for video

[@v-tt1766]

Hi, I've a similar kit, but I have a doubt about the Batteries, can I use 2 x 3,7-1600mah batteries or maybe 6 x AA of 1,5-2500mah? which is the best option? thanks

[@plannershub1212]

every already knows this better

[@dr.saniyamemon]

bro! which board you used for fitting motors

[@ansuamanasumorielahai6787]

Great project...

[@binoraninsith1084]

good work putha

[@mauryashailesh4087]

its so easy brother

[@alejandrobailon1761]

Hi there! Im working on a school proyect that is basically the same idea shown here but larger (a lot larger) using 2 wheelchair motors and a sabertooth 2x12 motor controller. So my question is, could i use the same code? Thanks in advance.

[@omaromarr266]

what is the name for the application used??

[@dhruvkamal4053]

HERE IS THE CODE (TRANSLATED IN ENGLISH) Int izqA = 5; Int izqB = 6; Int derA = 9; Int derB = 10; Int vel = 255; // Speed ​​of the motors (0-255) Int state = 'g'; // start stopped Void setup () { Serial.begin (9600); // initiates the serial port for communication with the Bluetooth PinMode (derA, OUTPUT); PinMode (derB, OUTPUT); PinMode (left, OUTPUT); PinMode (left, OUTPUT); } Void loop () { If (Serial.available ()> 0) {// reads bluetooth and stores in state State = Serial.read (); } If (state == 'a') {// Forward Serial.println (state); AnalogWrite (derB, 0); AnalogWrite (izqB, 0); AnalogWrite (derA, vel); AnalogWrite (left, vel); } If (state == 'd') {// right Serial.println (state); AnalogWrite (derB, vel); AnalogWrite (izqB, 0); AnalogWrite (derA, 0); AnalogWrite (left, vel); } If (state == 'c') {// Stop Serial.println (state); AnalogWrite (derB, 0); AnalogWrite (izqB, 0); AnalogWrite (derA, 0); AnalogWrite (left, 0); } If (state == 'b') {// left Serial.println (state); AnalogWrite (derB, 0); AnalogWrite (izqB, vel); AnalogWrite (left, 0); AnalogWrite (derA, vel); } If (state == 'e') {// Reverse Serial.println (state); AnalogWrite (derA, 0); AnalogWrite (left, 0); AnalogWrite (derB, vel); AnalogWrite (izqB, vel); } If (state == 'f') {// ON button moves sensing distance } If (state == 'g') {// OFF button, stops the motors does nothing } }

[@bablasonu]

lovely and brlliant hip hip hurrah

[@raghavchauhan8598]

wow realy good dude....

[@shersingh.1735]

Good

[@sushilvishwakarma6873]

Very nice

[@user-vo7ko6pu3y]

جميل

[@harisshah4189]

Nice

[@piyush8693]

I did the same but the motors won't rotate on any command. Power is given to all, Bluetooth receives the command but motors won't rotate . Please tell a solution bro please as soon as possible

[@JitendarKumar-ps4xl]

in part 1 you have just make the assembly but in part 2 you have opened and add wire connection ? But it is very very cool and i am speechless.

[@opengreenenergy]

+Jitendar Kumar Thanks :)

[@aadhiaadhi8534]

hi

[@myuzikku3408]

I made a quadruped project and it has been running smoothly, but there is a problem that I found in my project, which is the power source from the battery, when using a source from a fake USB port, and smooth. but when using a source from a DC jack, my project seemed powerless, works but it seems like it's not strong enough to turn on all the servo installed, even though I'm using a 12v source, that's how to handle it, ..?

[@SonnuYT]

aswm.....

[@sunilnale3674]

good

[@dimavers]

Instead Arduino Control Car I suggest using Arduino IO Control: you can create your own machine control panel with joystick

[@tharakaramakrishna2884]

great

[@fernandadalmau9247]

me ayudo un monton para hacer mi auto

[@SudhirKumar-by2sx]

can I use hc05 Bluetooth module instead of hc06

[@drpreetikanawjia183]

would love to see a similar assembly with rubicon module,and differentials

[@danielgonzalez4079]

Why did you not remove the film from the acrylic?

[@opengreenenergy]

Later I have removed it. Earlier not removed to protect it from scratch

[@AgneloLobo]

Hey, I am trying to make a rc car with 4 dc motors using motor shield and joystick shield, using NRF24l01 could you please tell me how to connect the nrf24 on servoshield

[@uvindulakmal8765]

super

[@AlbertoBesenBorges]

Thanks so much! I was looking for this projetct for years!!

[@tinkmarshino]

or you could buy the elegoo robot car kit and get all the parts ready to put together... Then you can spend you time mixing and matching boards and programs.

[@smartindiaOfficial]

ossam video

[@opengreenenergy]

+smart india Thank You

[@smartindiaOfficial]

Welcome

[@smartindiaOfficial]

sarkit kahase lae app Arduino 4WD ki?

[@yoyyoutubeme9194]

Awesome

[@opengreenenergy]

TOP 5 IN WORLD Thanks !

[@yaswanthgenji3922]

suprb

[@nikhilsangani6209]

how many and whch microprocessor u have been use...??????????

[@avaneeshnair7493]

Impressive!

[@ashrafibnealnoman5927]

nice

[@MysteriousJelly]

how is the Arduino nano so still

[@sp2257]

great i loved it

[@munirmuhammad9265]

can i use a different Bluetooth module since the bluetooth module you suggest is out of stock on the gearbest ?

[@ebenezern.o.mensah336]

Please do you have a video on how to create the app for controlling the andruino

[@joselitofiguracion4804]

amazing project!

[@kumarraju3953]

fabulous

[@raulo.torresserrano6721]

nice project men

[@user-wx9fj8ek8l]

Hi, I find that piece or Directory Hara how we're lessons or name of the item to tell

[@gamminghub7594]

I did the same thing with a esp32 cam module, a L293D and 2 wheels and 2 motors it has long range + I can see what happening in my home, if if am out I programmed it using FTDI programmer. I connected the esp32 cam with the mootor driver and now i can control it on the esp32 servor.

[@experiments8654]

good. Man

[@lucasgonzalez5288]

What I would Change if I used other type of l298?

[@houthchernchantuen6234]

i want to know the voltage of that two battery!!!!! can you tell me ?

[@sufyaanmansuri4967]

which light in the arduino should be on

[@mokiwaran6067]

where do you get 5v for arduino .i mean do you convert 12 v to 5 v and give it to arduino

[@Sulevk]

I have problem about connecting with arduino aplication and bluetooth... it works only about 5 seconds only.. I dont know why but connection only work few seconds after that signal just broke ?? why ??

[@raedalqahtani4228]

same

[@RK-xo2rc]

Xlent bro