Smith & Wesson FPC Unboxing and First Shots

[@Tom-kv8wy]

When you take it apart to clean it after you remove the bolt do NOT pull the trigger or you won’t be able to slide the bolt back in. Best to put the safety on so you don’t do it by accident.

[@jonnyb2652]

Been there😅

[@cocoman12]

It happened to me....

[@_zjjk_2131]

Am I just dumb but isn’t that what your supposed to do while cleaning a gun

[@Thomas-yw9eo]

From watching videos, disassembly looked complicated till I did it a couple times. Turns out actually simpler and easier than my Ruger PC 9 carbine.

[@Sirgromulus]

I concur. The hardest part for me is taking off the butt stock.

[@grizzlystiks]

With the FPC unloaded, place the butt stock on a flat surface then press down on the weapon at the same time pull out on the retention knob on the butt stock. What you are doing is compressing the internal spring to take the tension off.

[@jamestilley9786]

I hear people complain about where the extra mags are. I don’t think they meant it for tactical use just storage. Belt line will always be fastest spot for speed.

[@billjamison2877]

On your gun, put the red dot about 4 inches down the rail. I also have iron sights installed behind the red dot and near the end of the barrel. My red dot easily comes off to utilize the iron sights. I actually like the iron sights better than the optic. It's very accurate and a hell of a lot of fun to shoot!

[@jonnyb2652]

What iron sights did you get?

[@joselutabares]

I did the same thing using Magpul MBUS sights - works great!

[@billjamison2877]

Magpul sights@@jonnyb2652

[@jefflayton5889]

The grip is the same size as the M&P compact. That’s the reason for the spacers and the shorter grip. They wanted you to be able to use any 9mm double stack mags that are available. So you can use the 15 round mags with no need for a spacer or the 17 and 23 with the spacer. The spacer is used with the compact as well to help make sure you don’t over insert the magazine. If you use the 17 and 23 round mags without the spacer make sure the bolt is home so you don’t damage the rifle when they are inserted.s

[@sovietarmy7485]

why would it damage it?

[@davidsawyer6003]

Trigger does have a nice crisp break at the wall, it may lighten up with use. I couldn't charge mine from one side when I first got it, but it loosened up after some use. I put a Sig Romeo 5 on mine and it shoots great. The release for the spare mags is a little wonky, but I find that carrying 46 rounds back there puts the gun off balance, I will carry them in a mag pouch and store them om the gun. The slide release is almost impossible to use, so I would have to call it a slide stop only, no big deal just charge with the charging handle.

[@jacobbeaton6611]

Just got mine today! So much fun

[@TGLASS24]

Haha love the excitement! Reminds me of Joe Dirt when he finds the meteor! I'm ordering mine as soon as I get home in a few days and can't wait to get this lil gem added to the collection!

[@ronhagberg]

Magpul pop up sights will co-witness with the Romeo 5.

[@robertstanderford8438]

Love how you adjust sights! Im so OCD i do the math and stress out….

[@Seanbault1983]

Paid $629 out the door last weekend, taking it out this afternoon I’m also going to pair it with a Romeo 5

[@urbandadtv]

great review, I'm wanting this firearm more and more. love the Concealment of it and just being able to throw it in my bag and go to the range. I don't live in Rural america, so I think this gun would be great for me.

[@red_five1542]

Waited 60 days for mine to be in stock, but I got it for $599. I think the MSRP on it was $659, but my local dealer sells to be below list cause I deal with her exclusively for almost everything except ammo. Operation is smooth and easy and it's fun to shoot.

[@vyomps]

Excellent video! Were the magazines quite hard and rigid when new? I’m having a very tough time in loading the 9mm rounds and also dummy rounds in them.

[@Blankford777]

July 2023 these are down around $550. Nice unboxing, thanks.

[@Leonardokite]

When it comes to accuracy it is the part in front of the hinge. That's where the sighting systems are located and that's where it shoots. 😎 Awesome gun.

[@bigv467]

Hey Brian I was just checking out your unboxing of the FPC, and noticed the adjustable brace on the Saint just curious if if it came that way or you installed it, I have the same gun with a fixed brace

[@Rustebadge]

Mine has worked great. The buttstock you mentioned is not obstructive at all. Remember that the FPC is not a combat rifle. Its for holding off hoards of ravaging pinecones. Your Sint isn't a combat carbine either. I think S&W has "hit it out of the park" with the FPC. (And BTW, your Saint looks very COD compliant). And the bolt release is a compliance matter not a practical concern.

[@CTV_tactical]

Just picked one of these up today gonna take it to the range tomorrow an test it out 👍🏼

[@mike5seven]

@4:47 your the first person I see that figured out how to remove the mag using the same lever it’s located on. all the other reviews I’ve seen everyone complains about how you have to push the opposite button of the mag you’re trying to use, they make it seem like it’s such a big hassle

[@mtnride4930]

Did not have a problem in disassembly, what I hate is the mags in the stock, fiddling with a button to release a mag is stupid. Shoots great have added a red dot, iron sights, vertical grip, and a sling so far.

[@taemeister9302]

Oh god i wish i was you in this video. I can't order this until i know when i can return home. I'm an armed otr trucker who only runs texas ltc reciprical states 👍

[@romanm9862]

Try sighting it in using a steady rest on a bench vs. the Offhand position. I'm sure that it will give you better results on repeatability and accuracy . Semper Fi

[@williammoore6952]

Good video, Have you ran any steel case? Thanks William

[@billyphillips3746]

I saw another video with just iron sites good accuracy

[@JustinKingOffroad]

thats a sweet bang stick!

[@Myyt6908]

great review!

[@ethanmac639]

wish this and the metal m&p 2.0 came in .40 s&w

[@grizzlystiks]

Smith and Wesson plans are to make a .40, I think that they are waiting to see how well the 9 goes.

[@problemchild4132]

The present truck gun is a what? I just purchased the S&W M&P FPC for my truck.

[@VuhJJ]

Just picked one up locally for $575. Added an Sig Romeo5 and it's pretty darn accurate. Wondering if the 32 round ProMag would fit the gun and the stock. Be nice to carry 96 rounds on the gun.

[@stevetsataros6511]

I have two 32 round Pro Mags, They fit perfect.

[@FrettinTheBlues]

I want to like it enough to get one, but I’m concerned about all the polymer. The hinge, the rail, etc. It’s a lot of plastic. That being said, I love my Ruger PC. I know it’s a takedown, but it goes together quick and the connect point is steel and solid.

[@jacobbeaton6611]

It’s so light. And very sturdy, I’m amazed. I had all the same concerns as you. But well built and smart design. I do worry about the charge handle wearing out. So I try to pull it back to release and set it

[@300zxdriver]

Where do you buy your Romeo5s? I heard there are fake ones out there.

[@toolmakerbest1584]

We just bought a his & hers for $618.00 ea. 👍👍

[@williamestrada2410]

Howdy bud look up Tac comm llc they make after market parts4it later

[@buckcleveland9059]

F.Y.I CZ p10 f mags work in this . Also store in the stock.

[@NPUHarryKnuttz]

Anything shorter than 20″ is a carbine, and anything longer is a rifle.

[@1945tigers]

17 round mag here in Colorado your such a outlaw lol.

[@Skilpadjie1]

Version 2 will be alot better.

[@nojoy7238]

I really hope to get one of these unless they're made illegal.

[@Zippy-da-Chimp]

LMAO

[@mikealessi7761]

You would think that S & W would provide a better pack for it.

[@jacobbeaton6611]

Just got mine. Pack seems well made and a decent size. Like how it has no markings. Not threatening. Bag seems well built. Decent zipper. Lots of extra room for ammo, threaded add ons, optics. It’s perfect really.

[@anthonyguidas2012]

$700? I’ve seen it online for $575,

[@brianinthewildcolorado2778]

With tax and background check?

[@jefflayton5889]

@@brianinthewildcolorado2778 i got mine last week 525 out the door in idaho.

[@Rustebadge]

Paid $579 w/o tax. Have seen cheaters asking $1200. We need to ID and remember these dealers who are creating a false buying market.

[@NPUHarryKnuttz]

I can never watch another 1 of these videos..

[@stevestinnett6777]

Paid $579 for mine a week ago.

[@milonjano]

🤣

[@angelo_giachetti]

You dont need that. You shouldnt be able to have those. The gov will protect you. If you dont agree vote Republican or dont vote.

[@ethanmac639]

eww 9mm paraplegic🤢🤮