SRX Rings

[@dp5430]

Every spring I pull that cover off that power valve actuator motor. I pull on each cable gently with a pliers. You can feel each valve open and close smoothly if they are good.

[@jasonwulff8341]

I have a 2001 SRX 700 that I refuse to sell. Just love the sled that much. The scuzzy never fails to fail was pretty funny 😄

[@JohnnyKS2000]

I have a 02 SRX with 23,000 km. I still have the same rings. My power valves need to be cleaned every 1,000 km. Makes a big difference in power.

[@ryanbenbow-zx2sd]

Use amsoil that will clear it out. I use that in my IQ shift 600. Forget factory oil

[@tdubbs934]

I had a 00 srx. It was a great sled. Now I have a redhead triple.

[@dpaquin58]

The Best as usual Jeff. Thanks for the tips

[@matthewnelson5472]

I honed some nikasil liners a handful of times. Works ok. Just don’t over do it. Lots of oil, and only go up and down no more than 5 times. All you want to do is rough it up.

[@gordonliddy9418]

I have an srx600 that is hard to find pistons for. Are there any other options like the sx-r pistons?

[@kylepenner]

I have a 98 srx and and the compression on all three cylinders is between 100 - 110. Will I be okay to just change the rings or should I get all the pistons replaced? Thanks