SNOWSPORT® HD Utility Plow Install Video

Discover how easy it is to install your SNOWSPORT® HD Utility Plow by following these simple instructions. This home snow plow is designed with you in mind. The durable rubber cutting edge allows for fast and easy snow removal in less than half the time, while overcoming the most demanding conditions. No more hassling with shovels or snow blowers in the cold, unlock the full potential of your truck and conquer the elements with a SNOWSPORT® HD Utility Plow!
For SNOWSPORT® Snow Plow instructions, please visit our website:
www.agricover.com/snowsport/i...
For more information about SNOWSPORT® Snow Plows, please visit our website:
www.mysnowsport.com

[@Arfonfree]

My plow came today. Very fast service. Ordered Thursday, came the following Monday. Thanks. I found the written directions invaluable. My one bit of advice to anybody buying this unit is: READ THEM! I skipped a step and had to backtrack a bit. Probably cost me 10 minutes. Working alone, it took me about two hours (if possible, follow Snowsport's advice and have a helper) including collecting all the tools. Everything fit together perfectly and all the parts were there. I totally get why the assembler drills the holes after the parts are bolted together. It removes any difficulty fitting the parts together. I think the design is brilliant. It is great to have a well built product that is so easy on the budget. Now I need some snow...

[@rodneymutzabaugh6605]

Have used this first on my F 150 then installed on my F 250. Works fine for Macadam and stone. Only issue is dry Macadam causes rubber to vibrate snow blade excessively. Just go slower till you get to more snow or put in raised position. Just would like tell tail markers to be longer. Wish I would have bought this plow years ago. So much better than plowing with 4-wheeler. A second plus is using hitch to haul bicycles on front of truck.

[@sc29229]

Just assembled mine today. Pretty straightforward.

[@toddjenest3212]

If the rubber box-end is bending inwards when pushing snow, does the blade angle have to be changed?

[@maestroaxeman]

I'll be on season 2 this year with my plow. Two suggestions: 1. Be sure to check sheer bolts frequently after the first few uses. They WILL break off if NOT adjusted to final tolerance. I knew of this possibility, so I checked to be sure they didn't break. I only lost the head on ONE. 2.Make ABSOLUTELY SURE your mount to the vehicle's frame is SECURE. The bolts WILL strip out with frequent use & detatch the mount assembly from the vehicle's frame. I had my truck's frame retapped & the mount welded to keep it from happening again. The mount assembly, receiver & blade unit installs & uninstalls easily. My final bit of advice is to chain the blade unit & receiver guides to the mount on your frame because SOME dipstick rednecks think the plow is "easy pickin's tuh rip off'n yuh". The dumbasses DIDN'T get mine...but were bugged I chained it on. Overall: These are really nice plows. Mounting my winch as a plow lift soon.

[@LifeIsGood143]

Can you back drag plow with the winch installed

[@SNOWSPORTSnowPlows]

The motion activated design allows the SNOWSPORT to tilt backwards, the plow will glide over the surface instead of back dragging. Even with a winch installed you won't get back drag.

[@josephpainchaud7533]

Thats a lot of work should come pre assembled

[@Accesscovers]

Hi Joseph, The blade does not come preassembled to keep with cost of shipping down. Thanks.

[@dsimiketossett1753]

My 13 year son assembled ours in an hour.

[@TheIrishAmish]

Gee might be why it’s $300-$400 cheaper than the DR RediPlow.

[@thestcroixkid]

How in the world are you going to ship a 7.5 or 8' plow pre assembled on the plow frame...use your noggin...

[@LifeIsGood143]

What size drill bit 5/16 right

[@SNOWSPORTSnowPlows]

Yes, you are correct!

[@kbauermann]

Why doesn't it come pre drilled? Why make all your customers waste time and effort going through drilling when it could come just ready to be assembled?

[@Accesscovers]

Hi Kelvin, The plow assembly process is designed to give you the best product for the best price.

[@toddjenest3212]

I agree with Kevin. I'm already spending $2k on the plow and you can't predrill 4-6 holes within the price?

[@thestcroixkid]

Maybe you should just buy a shovel...see how much time you waste then...

[@roderick9018]

For $2k the holes should come pre drilled .

[@smjohn4640]

Jeeseee, I have to visit harbor freight and invest in a good $400 in tools before I buy this plow. No thanks!!!

[@thestcroixkid]

Typical internet overstatement...you need two wrenches, a drill and a drill bit...