So You Want to Own a Deuce part 6. Shift like you've never shifted before.

[@marinetech262]

I got my deuce and a half tag on my military license when I was in the Marines in the early 90's. I was the only guy in our platoon with experience driving a larger truck, thanks to driving an old International potato truck on my uncle's farm when I was in high school. I still remember the advice the motor pool chief gave me when we went on our check ride. "Don't baby the shift PFC. Drive 'er like an old 50's or 60's Mack. Slam your hand in the door and drive 'er angry." Used to love tooling around on base in that truck.

[@MsGorteck]

Gods honest truth!

[@Dr.Pepper001]

I drove the deuce and the 5 ton in the Corps from 1964 to 1968. When I was stationed on Okinawa we used to take the deuces to the beach and run them up and down the sand dunes. Hearing the sound of the truck in this video brought back lots of memories.

[@dandahermitseals5582]

I'm a 33yr retired lomg haul ( Florida to Yukon , Alaska to NYTs ---Yellow Knife) n I gotta say it was sweet hearing ur shifts in that lumbering old beauty. Wish it was mine.

[@kylecox5563]

quick way to get to 1st at a stop is throw it in third or second. it will stop the transmission and allow you to get it in alot easier.

[@richterman3962]

Kyle Cox yes

[@colbypride2268]

Thanks

[@MsGorteck]

Huh??

[@hummerguy]

I will try this next time I take the deuce out, because that wait or grinding it, is really annoying

[@steveskouson9620]

The way I've always done it. I STILL love that shift pattern. Third is down, so is fourth. Fifth is up from fourth. Oh, those BIG wingnuts on the windshield, will hold a M-16. Upside down, using the carrying handle. steve

[@wileydog420]

Wow, that sure takes me back! I was taught a trick by one of the guys in my company who'd spent a lot of time driving these trucks in tactical scenarios in Korea. I always wondered how he was able to get his truck up to speed so quickly inside the motor-pool yard in such short distance. He taught me to start out in low range but in 2nd gear; then shift from 2nd low to 2nd high, then the rest of the gears how you see fit. Starting out in 2nd low gets you rolling a little bit faster than starting in 1st high and then the shift to 2nd high can be done quite quickly. Thanks for the ride!

[@awkwarddude]

That's exactly what I learned quickly to do. Worked great!

[@hummerguy]

Hmm that's interesting, may have to try this

[@marqueswilsonn]

You hear that?? Sounds like freedom’s coming! And hell’s riding shotgun!

[@tylerbonser7686]

I'm coming and hell's coming with me!

[@Woody-nc1ru]

We had one of these for us to get around while on deployment. I loved driving it. You definitely had to have 6X etiquette when you had guys in the back. No slammi g on the breaks and no popping the clutch. You can get 15 guys angry real quick back there bouncing and sliding around. Oh and splinters. After about 6 mos driving that thing my g/f picked me up when I got back in her Mazda RX7 and it was a standard. I had a hell of a time driving it, lol I about pushed the clutch throu the firewall. And the gear shift only traveled about 5 inches. She was yelling at me like be careful, I laughed and said give me a break, ive been driving a monster for 6 mos. Not some little hoiti toiti sports car.

[@ChevyTrucks3500]

Sweet Deuce man! I love the sound of going through the gears and hearing the engine pur! And you made my father and I laugh so hard when you said "fast and the furious in a deuce". Also I have to say you've got the best quality and informational videos.

[@dwightstewart7181]

I drove these trucks for several years in the Army (in Germany) and, absent a significant load or significant upwards incline, I’m in the start with 2nd crowd. Small inclines or loads never posed a problem. If you drive it enough, you’ll quickly get the hang of what it can and can’t handle.

[@adamwest8256]

I can't wait to have a deuce of my own someday. I've always wanted one. Basic engineering and very easy to work on. Hearing you drive it reminds me of the old 85 Mack I used to haul water in. It was an eight speed thought, but it had straight pipes and lord how that thing bellowed. Man I miss it.

[@powderriver2424]

I haven't touched a deuce since the Army, 22 years ago, but I have seen a lot of recent surplus and old converted units from fire companies and municipalities. I've been around trucks and equipment my whole life so I know when I see worn out and abused trucks and yours appears to be a good runner. Growing up I drove a deuce dump truck off road laying stone for logging roads, I was 12, and years later when I was in basic training in the Army we were out in the field and one of the drill instructors couldn't start the truck one morning, so a wise ass me, I asked if I may assist and look into the reason. The drill Sargent said " what the hell do you know about deuce's " I replied maybe something or maybe nothing. The Sargent let me look into the problem it turned out to be the battery connections I fiddled with them and started the truck. So simple, however it made me look like a genius!

[@danielrickel8807]

140 horse is what my old Chevy 3/4 ton pickup made and it had no problem taking off in 2nd. It was a grandma gear first gear just like your Duce. The owners manual said to use low only when pulling heavy loads.

[@JimsEquipmentShed]

Thanks for the ride, I really miss driving those trucks. When I was in Panama I drove a mobile shelter version (It was a portable photo lab). The 1st and Reverse came in handy when I took a wrong turn and had to make a 400pt "K" turn at gun point..... Yea, good times.... B-)

[@DieselDahl]

I actually used to drive one of these in the Norwegian army about 26-27 years ago. Here it was called the m-621 and it had single wheels in stead of duals on the rear axel, and it had air operated lockers for the front and rear axels. You didn´t want to use the front locker if you were going any where but straight ahead though. I also remember using the high-low shifter together with the 5 speed. A bit "unsafe" some times as you actually had to reach down quite a bit to put it down into low our pull it from low to high and you would loose your view of the traffic ahead of you for a brief moment every time.

[@MitchRiedstra]

A quick tip on getting into first or reverse a little faster, either push the selector into a syncronized gear first, or apply _really light_ pressure on the selector in first or reverse to "feel" the gear, once they match it'll just slip right into gear.

[@brentreeve7554]

Despite that spring tension he mentioned?

[@patrickhorvath2684]

@@brentreeve7554 Yes, called floating gears. Going from 2nd down into 1st, Slow down to 5mph, blip the throttle, steady but light pressure down into first. When trans speed is synchronized briefly, it will drop right into gear. Goes fir all gears except reverse. A semi truck has zero synchronized gears. Only time clutch is used is starting from a dead stop

[@radaraacf]

I have to do 2 to 1 at a stop in my 1988 perentie GS it’s now second nature

[@pioneersurvivor8635]

If you are running with no load, or a light load and not pulling anything, just forget about 1st gear take off in 2nd and give her some throttle, you can drive that big girl like an overgrown pick up. I got thousands of miles in them to back that up. One important safety feature i want to really have people take notice of. Never, ever, put your arm, or your hand inside of the steering wheel of these old girls. The front wheels can catch, and that big old steel steering wheel will break your damn arm. Seen it happen to alot of GI's.

[@earlwyss520]

I always drove it like a 4 speed with a granny low.

[@prodaof2554]

Well said I was going to say the same about start 2nd 1st is granny I learned on an old 80 Mack

[@tylerbonser7686]

Yes you can easily start in 2nd but its much harder on the clutch. As you said "take off in 2nd and give her some throttle" well you need to give it more throttle because the clutch has to slip until your engine speed matches the intended rpm for that gear. Driving something like that is fine for something you don't own but bad advice for someone who wants their stuff to last.

[@MrSuperG]

Earl Wyss you got that and William

[@stevenking2980]

At stoplight you could put it into 2nd, to sync, then go to first. That's what I do.

[@francissullivan6400]

I'm watching videos about a TRUCK I can only dream about owning..LOVE the INFO.. God Bless!!!

[@aresler6085]

Regarding the U to 4, the original Reo gas engine revved to about 3k: to accommodate the slower Multifuel, an overdrive was needed. (Even so the gas deuce is still a faster truck.) So: 4th was re-geared from an underdrive to an overdrive, while 5 stayed direct. The rest of the ratios were changed as well, again to accommodate the narrower speed range of the Multifuel, making them marginally closer together, and to fill the gap left by the re-purposed 4th. (This is where the gas truck's granny 1st was lost as well; all 5 speeds are needed all the time.) Unlike Mack or others who made the same overdrive transmission conversion, Spicer did not add an internal lever to reverse the 4-5 shift: the direct shift is still back, moving the shift fork forward to tie the output shaft directly to the input shaft. Thus when you shift the next gear after 3 is the direct former 5th (back), followed by the overdrive former 4th gear (forward). Spicer did relabel the shift pattern: 4th became 5th and vice versa. And we've been shifting in a U ever since.

[@billbergen9169]

I would buy the gas version, and install a gassifier.

[@billbergen9169]

Or the diesel with a big turbo.

[@Lanninglongarmmowing]

That sound is music to my ears!

[@danielwoodhurst4339]

I like all of your programs.Just got my Duce.An education for me.Thank you.

[@v65dreamer]

I noticed you left out a tip that all experienced Deuce drivers would know but many first time drivers may learn the painful way. In the Deuce and the 5 ton I drove in The Army you had better have your hand in the correct position on the shift knob or you could crack your knuckles on the metal dash going into second gear.

[@poloblackstables]

I own M342a2 Dump and bought for move dirt around on the farm. I am military vehicle collector and also own ‘43 GPW and ‘64 M151a1 but wasn’t really familiar with large vehicle like Deuce so this is very helpful!

[@jamesmessmer7405]

Yea Sam you can start in second low then go to second high the just run out 3rd 4th 5th high. Won't hurt the truck and it shows people you realy know how to drive a truck.

[@hilmurleaf8146]

it sucks that you haven't got a ton of views on these vids, as they're pretty cool in my opinion. and most definitely useful to anyone who's going to or just bought a deuce and a half!

[@asandberg6]

Check out the 3 speed brownie from Spicer or Brown-Lipe. It would placed between the transmission and transfer case and connected with short drive lines.

[@SiliconBlake]

Love that little treat at the end where we go cruisin'! I live smack in the middle of Silicon Valley in a subdivision -no way I could park one of these on my street :(

[@speedstick77]

Your presentations are well thought out and organized. They are a big help. Thank you, Sir!

[@aaronjohnmaughan]

Slotting the gear lever into a synchronized gear prior to reaching for first will make first gear selection a grind free operation much more quickly than waiting for the shafts to spin down on their own. Essentially you're using the synchro, from second gear most likely, as a brake for the spinning shafts. Works great.

[@lewiemcneely9143]

I always split the 5-ton with the transfer case hi-lo and it was a very strange pattern. And I always pulled it till the governors got it. But I was hauling a D-7 but the old rig just hummed. You can look at the speed data plate on the dash and see where I went as far as shift points go. I always wanted a 10-speed Roadranger or an 8 Double-L but you drive what you've got. The old rig sounds sweet. I never drove a 2 1/2 with a blower. But this was in 70 to 73.

[@andrewwash8005]

I was a SeaBee Construction Mechanic and had a hell of a time getting the Equipment Operators to understand the truck well enough not to grind first.

[@highwatercircutrider]

Music to my ears (Sgt. Gary, Army 1970-1976)!

[@iamrichrocker]

the day of the third pedal is fast coming to an end..what a shame..i grew up with 3 on a tree and loved the feeling when i mastered the smooth shifts...but was nervous on a steep hill with a stop sign..lol..great video..

[@mageownx911]

sounds beautiful!

[@jldwolfe]

A trick for ANY vehicle (big or small) with unsynchronized transmissions for first gear. When you have been sitting in neutral with the clutch out, push the clutch in and go for second gear. The syncros in second with stop all of the gears in the trans. Then go strait to first or reverse and let the clutch out as normal. With some practice you can do this fast and smooth.

[@deuceandguns]

That's a good tip I'll give that a shot next time thanks.

[@BSKustomz]

i was just going to suggest that

[@samanthamonaghan7579]

I would so need a paper on windshield as down to four in a 5 speed is so odd. Used to a 10 speed split shift.

[@truckfreak1027]

Just watched all 6 vids! Great work! Love the truck I hope to get one sometime in the future. Keep up the great work!

[@kc7brj]

I never did drive one in the Marines but did extensively as a Converted Fire Dept. Brush/Tanker with a 2,000 gal. steel water tank in back. Plenty of power and could go anywhere, easy to drive just didn't turn corners very tight.

[@jakebrown4398]

Thanks for the vids I'm thinking about getting a deuce when I get my drivers license in like 2 yrs and these videos help me learn more so I will know more about them when I have one

[@blakebiermann4316]

The 4th and 5th gear holes are reversed because they are based on the design of a 5 speed direct drive transmission. The back right hole doesn't engage a gear, but links the input and output shafts together. The overdrive 5 speeds in deuces basically just turned the upper right hole into an overdrive and changed the 1-3 ratios for more even gaps between gears

[@AugustusTitus]

It's a Spicer H-pattern with reverse and low on the left side. If you think about it, it sounds just like a semi, except where you'd split the gears, the transmission stops.

[@pmurphy5948]

Hey BC, I've been watching all the videos thus far, and man oh man are these great! Everyone debating owning a large MV should watch these. This video was awesome for talking about the transmission and her "quirky" ways :D

[@dixiebushcraft]

Starting off in second is quite alright. I hardly ever use 1st gear, and that is with 80,000 pound trucks. 1st is a “pulling gear” for offroad and heavy load, and for starting off uphill. Most road driving you can use second. Before the self appointed experts jump on me, I have driven deuces, as well as most every other type truck that has been on the roads since 1970’s. 25 years trucking does actually mean something. At least when it comes to knowing how to shift and drive trucks.

[@nimbly1693]

Most large trucks, if you are coasting to a stop in neutral you can slip it into first at around 4 or 5 mph (without the clutch).

[@RickyCaughron]

I have always started out in second gear. I have never use first gear. I have started out in mud pulling a 105 howitzer with section equipment and crew in second gear. I have haul a 105 howitzer and section equipment while pulling a 105 howitzer and I started off in second gear. I had no problems doing it. I had plenty of power. I was in high range all the time doing this. You got to remember that transmission is gear down really low. That's the reason you can start out in second because the transmission is gear down low. The only time I used low range is when I am backing up. I have use low range in mud before. You don't have to start off in low range and then split gears to high range. They doing that just for fun. Well that's my two cents , for whats it worth. Go drive the truck the way you want to and have fun. That is part of the reason of driving the truck is to have fun. Enjoy.

[@tylerbonser7686]

Good advice and smooth shifting. The only thing I would add is dont push the clutch to the floor while shifting gears, it engages the clutch brake and you will wear it out much quicker and at some point you wont be able to get it into gear when you are stopped. Only push it to the floor when you are not moving at all.

[@deuceandguns]

No clutch brake in a Deuce.

[@trevorzzealley2670]

Great video , I did get to use one in Australia ( not many here , pity ) it had an allison .You could train a good chook to drive that one .

[@themisunderstoodgorilla7030]

This is a great video, well done, i've never seen one before, but i'd sure like to, thanks! from Australia.

[@igostupidfast3]

why not just put it in 2nd with the splitter in lo since it would be lower than 1st in hi?

[@joshmarkham8985]

It’s in all the technical manuals with most ww2 and post war vehicles select starting gear depending up conditions, rough and at an incline, 1st. Flat or downhill 2nd. Same for high and low. Or low direct, and overdrive.

[@shane4445]

Great videos DC! I am looking into buying a duce and you have helped me in so many ways. I know a few things to look at and I have a better understanding on how to operate one of these monsters. I am interested also in how to maintain and also just how and where to check the fluid levels at. Thanks for the great videos and hope to see more soon!

[@captainredneck0683]

That's why big rigs have a clutch brake. It makes getting into gear very simple and quick.

[@bgbuilder]

I just purchased my first one this week, I now understand why there is a rub mark in the OD green dash from a boot

[@jaygraham4095]

I've driven a lot of trucks and pickups. A good rule of thumb is with a granny gear 1st. If the truck go in 2nd when you let out the clutch with no throttle. You are good & not going to hurt anything. If you need throttle use 1st gear. International uses that same trans in a lot of their light trucks. Starting in 2nd gear is not a problem. I also have a question. Why don't you use the engine as a brake rolling up to a stop sign. You are wearing out your throw out bearing and your brakes unnecessarily. Like the videos. Am looking for a deuce to build a go anywhere camper

[@melanehme3661]

The idea of owning a deuce+0.5 excites me, but, manual shifting and clutching sicken me. This from a guy who learned to drive a manual from the get-go and even knows how to drive an 18-wheeler. I like automatic transmissions and I'm over manuals. I'm not sure if it's possible, but if I had a deuce+0.5 I'd convert it to AT. I'm wondering if there are AT versions or if someone's already done one. Great entertaining video, I've subscribed too!

[@beunbad]

I heard some say you can turn up the injectors on the multi fuel and make more power and top end to make highway driving a bit easier and no lag on the hills...

[@redsky8509]

the Duce I drove had a split rear end. We shifted the rear end as we shifted the gears up. Did they change? The one I was driving was made in the 1950's I think.

[@deborahchesser7375]

Red Sky 5 and 2

[@timesthree5757]

Yes in 1965 five they changed 2 the A2 version were you split shift at the transfer case.

[@dieselnutnaji6888]

Excellent vids man

[@jimmcdowell6000]

I love that truck. I live in the city so I need something a little smaller.

[@shedflips]

In my experience, I always figured shift points by the sound the deuce was making

[@Razorfish]

When I used to drive a truck we'd say starting off in an empty truck in 1st or 2nd depended on who was paying for repairs.

[@shannonjennings684]

I have watched all the videos. Just 1 more. Where to buy one

[@abergethirty]

I learned to shift driving a Deuce. I could never drive shift in smaller vehicles without stalling it for some reason. I just kept to automatics.

[@stevenking2980]

Me too... 2000 is a good shift number. Good video.

[@markvolker1145]

If it is taking along time for your clutch slow to get into 1st gear, your clutch break either needs adjusted or replaced. FYI to prevent your clutch break from wearing out quickly, never press the clutch all the way to floor unless you are trying to get going from 1st gear.

[@deuceandguns]

The M35a2 transmission doesn't have a clutch brake. These trucks are 40 years old using 70 year old technology and designed to be as simple as possible.

[@cabinfever7590]

All deuces with the 5th gear toward the dash are overdrive units. In a direct tranny (no overdrive) 5th gear is coupled to the input shaft, witch is the smallest gear on the top shafts ("normal" shift pattern). An overdrive tranny, the second gear back on the top shafts is the smallest, (this gear would be 4th on a direct), being smaller it turns faster than the input shaft, and you have overdrive. The stick being toward the dash is by no means for creature comfort, it is simply because Spicer used the same shift top on the direct and overdrive transmissions (this switches the last two shifts on most older truck 5 speeds, Spicer, Fuller, New Process, etc.). You have to remember the only ratios available for the Rockwell axles were 6.72, without overdrive you could only go as fast as you can now in 4th gear (direct). Great video, you did a fine job, keep 'em comin'.

[@deuceandguns]

Thanks for the info. Having 5th out of the way does help with cab comfort but when was the last time the military specifically designed anything with creature comforts in mind. :)

[@ClintsTractor]

say no to Democide Um, I'm not sure where you got that from, but no that's not correct...

[@ClintsTractor]

say no to Democide Ah, okay...

[@jessefarrington6029]

Sounds sweet! Love it.

[@wildcoyote34]

did you use a cummins diesel or a gas engine I love the sound of the engine in this guys truck real similar to a first gen cummins I don't own a deuce yet ,,but I do own a couple of other trucks namely an old airforce water truck ,used for watering cattle on the surrounding farms and a 1973 jeep J30 truck which I rebuilt from ground up ,, my J30 now has a 8V-92 Detroit diesel with dual turbos and a 13 speed transmission engine/trans came from a dumptruck

[@TheDreadedRearAdmiral]

Fast and furious in a Deuce; now there’s a sequel I would be interested in seeing.

[@the32712]

Nice country out there, reminds me of the foothills of Appalachia.

[@johnronkainen9445]

the32712 I was just going to say that it looked like Kentucky.

[@P7777-u7r]

Thats like my old 80s f150s first gear. On that truck youre actually supposed to take off in 2nd for normal operation and 1st gear is a "granny gear" used for taking off either up a hill or if you have a heavy load

[@TheSonofmydad]

FWIW I learned *much* of how to drive (in the 60s TYVM) in a '64 IHC Scout-80. That puppy's 3-on-the-floor Spicer had synchro only in 2 and 3. It was easier to stop the gears for another shot (at 1st or reverse) by hitting 3rd than by hitting 2nd. Anyone with an ear for pitch can learn to goose it for the right note to hit an unsynchronized Low-gear from 2nd at {some-road-speed} with no *crunch* w/ just a little practice. Best regards, all.

[@MrTiger310]

When I was as in. Air Force training was not to use first unless towing. Low range was for off road use only. Not trying to say your wrong by any means. It's just how I was trained.

[@Shane-Singleton]

Wow i'm surprised how little difference there is between 4th and 5th. I'd really like to drive one of these things some day.

[@rickmckown3214]

If you do need to go into first gear at a dead stop, try slipping it into second or third first.

[@danoneill2846]

I have found in OTHER trucks & tractors .. if you want 1st or R , hit 2nt gear first THEN try for 1st or R , seems to get the gears in a better spot for the shift >> ALL WITH THE CLUTCH IN , full stop . Less grind . Yes I have no problem with 1st gear start , If empty & down hill I would use 2nt .

[@jamesmessmer7405]

First gear in a deep reduction use to in very soft ground intill you have reached solid ground or to ford. The Deuce is fine to start in second gear low. That's the problem you read the TM's that were printed for dummys that never drove a truck. I did not say to run at the Govener but you need to shift at maybe 2500rpm every gear till you reach the speed you are looking for. Then cruse at 1850 to 1900 for best fuel milage.

[@eugeneslagle7935]

I wish I had one of those, simple, reliable & can do MOST anything that anyone would need but my wife says that we have no need for a truck like that since I have a 2005 GMC K2500HD EC/LB with Duramax & Allison so for the time being I'm working on converting it to a civilian version of a LSSV. Later when I can convince her I will be getting one of the A2's.

[@Flyboy207]

Thats a cool idea, I've had two of those trucks and they're hard workers.

[@ponkkaa]

Sweet sound. Very small pitch change between 4th and 5th.

[@deuceandguns]

Good ear! That's due to the very small gear ratio change.

[@TommyboyGTP]

***** Are there gears available if you want a taller 5th gear?

[@deuceandguns]

With enough money one could have custom gears cut for the trans but most will change the gearing in the transfer case. That's the equivalent to changing the differential gearing but you only have to change the one gear vs. all three. With that change a Deuce can run at 60 mph and keep the engine at a safe RPM.

[@TommyboyGTP]

***** Very informative info. Thanks for the reply!

[@forestlawrencegrading9154]

I wonder if there is a list of specs on the transmission as far as gear ratios usually in big trucks when high gear is forward like that it's usually a bit of an Overdrive but not always

[@JK-vr3vp]

Where us a good place to buy one ?

[@mmiller1188]

Technically, to shift any manual transmission, you only need to press it enough to disengage the clutch.

[@christopherhartleroad4776]

where can i buy a 6-x-6 army Deuce at/from what is agood price?

[@kylemanson6485]

Very cool. I want one!

[@iampapa318]

Well done, good information

[@djverhulst]

I love your video's about the Deuce ,,, do you have plans make video's how to do maintaine ?

[@johnpruittpruitt4677]

Thank you Brother

[@mrsmith2876]

It's just like an old 4 speed just with an extra gear

[@KevinGrumpyCuzz3243]

I had a 1958 GMC duce with a 302 straight 6 and an alison auto trans. great old girl, rip a house off its foundation low gearing. I miss the old girl, the fella I sold her to stripped her and scrapped her. been thinking about picking up another one, Kaiser or newer this time. what is your best suggestion as to year or make? just looking for a back woods truck to get to my claims.

[@R.Frayne]

Great video BC!

[@patr10t762]

As a pro driver i depress the clutch and 'touch' another gear that will sync most truck transmissions making the move to 1st or reverse clash free. Let me know if it works for you.

[@rustednbustedmopars6087]

Watching basically every video that has “deuce and a half” or “m35a2” since I just bought my first 1966 m35a2 today and didn’t get time to play with it much

[@deuceandguns]

Welcome aboard! I plan to put up more vids in the next few months.

[@rustednbustedmopars6087]

Definitely subscribing! I picked up a 1967 m35a2 I’ve always wanted one got it for $1800 everything perfect and works great 30k miles needs a bed and a canvas top if you know of any

[@deuceandguns]

memphisequipment.com is a good place to start. There are several small businesses that make new canvas tops/covers but be sure to read their reviews before ordering.

[@rustednbustedmopars6087]

Awesome thanks a lot

[@paladino444]

Nice video. I would have been very helpful if you could have given us some guidelines on stoppping distance. Of course the health of the brakes dictate that but ...for instance...does stopping a duce take twice the distance of a 1 ton pickup truck ....1.5 times the distance...basically same distance as a 1 ton pickup?

[@johnpierce8114]

No transfer case? The deuce-and-a-halfs I learned on all had transfer cases - all Studebaker-built, I believe. ("C" Motors, Service Battalion, 4th Marine Brigade, MCAS Kaneohe, 1963)

[@deuceandguns]

John Pierce It's got the two speed transfer case but I haven't done a video on it just yet. Interestingly, the M35 assigned to my dad in Saigon didn't have the two speed transfer case. My theory is that someone knew that he had learned to drive on Thunder road and thought it best for everyone to shift it into low speed then remove the handle. Thanks for watching and more importantly thank you for your service.

[@johnpierce8114]

***** Thanks for the response. Used to have contests in the motor pool to see who could get through the full pattern fastest. Usually wasn't a whole lot of room, so if you were too slow you didn't get all the way through before having to slow down. When shifting gears and transfer case simultaneously, it was faster to reach through the wheel with your left arm, rather than between the wheel and your body - made it easier to shift the case. I loved the things (except for the miserable camouflage nets). I hope you have a really good time with yours.

[@stevemace1493]

in the late 1970 & the early 1980 the military put out a MWO modified work order, on the multi fuel in the M35 series vehicles removing the compensator from the fuel pump ( injector pump ) not making the M35 series a multi fuel engine. the reason for the MWO is the military went to a single fuel source for all military wheeled vehicles & powered generator systems DISEL.

[@mccainjay]

two things: adjust the clutch brake and, when empty or light load, start off in second or third -no harm unless you try to gas on it too much

[@mkaa05]

LUV UR TITLE...LUV UR VIDS....AWESOME!!!!

[@josephiacuzio6361]

My pop was a Sargent Major in the Army and I learned to drive a stick in a Deuce and a 151.

[@deuceandguns]

They really threw him in the deep end.

[@MrBrockberg]

wonder how much work it is to pull out that motor and drop in a any mechicanal diesel motor? most truck nowadays are 8000 pounds empty throw in 4 ppl and stuff your at almost 9000 . that or maybe get some lower gear numbers.

[@danielkresha2228]

Hey BC! Have to tell you thanks for the great review of your deuce! Can't remember how long I've wanted one the time has come to go shopping Knowing what you know I need an opinion, I prefer the older multifuel like you have but interested in the central tire inflation on the A3's! Do the A3's have better highway gears? I'm in Colorado where a trip to the mountains would take a heck of a long time at 45 or 50. I've seen overdrive units installed but at serious cost. Really enjoyed your series!

[@eric3532]

I always just tached high and started in 2nd.