Soapstone 101 What is it where does it come from and where to use it SD

[@macym57]

Thanks for the info, good presentation.

[@soonersciencenerd383]

Is that the same thing you use to mark steel, or for sharpening blades?

[@martinbattilana4249]

Both soapstone, different grade and hardness.

[@martinbattilana4249]

9:37 What kind of water boils at 500 degrees?

[@navalfa7291]

Canadian ones.

[@sheilabrennan5543]

Can we get it in Ontario?

[@TheLinderword]

is it possible for soapstone to be white or light in color?

[@martinbattilana4249]

Light color soapstone has a higher talc content, and is thus softer. Probably too soft for a counter top.

[@tuforu4]

@@martinbattilana4249 is it same as PUMICE STONE TKS

[@martinbattilana4249]

@@tuforu4 Pumice stone is porous lava rock. Nothing to do with soapstone.

[@tuforu4]

@@martinbattilana4249 ok tks

[@samuelliao9216]

Longyi patented built-in 3 classifiers dry grinding machines already put into mass production. For limestone/dolomite/calcite The whole grinding system power is around 370Kw A.D97=4.8um (≦2um: 73.5%) Output: 1000kg/h Energy Consumption: 296Kw/Ton B.D97=6.3um (≦2um: 64%) Output: 1500kg/h Energy Consumption: 197.3Kw/Ton C.D97=7.1um (≦2um: 57%) Output: 1900kg/h Energy Consumption: 155.8Kw/Ton For Talc powder, Longyi powder grinding mill power is 250Kw, the real working power is around 200~225Kw, including classifying system. A. D90=10.5~10.7um output: 4 tons/hour B. D90=9.8~11um output: 3 tons/hour It is suitable for processing nonmetallic minerals such as calcium carbonate, calcite, Kaolin, clay, barite, talc, gypsum, limestone, calcium oxide, bentonite, dolomite etc. Samuel MP/Wechat/whatsapp: [phone]

[@alonzodesantis6989]

Can it be used for a basement just think a nice cube of soapstone no water infiltration just thinking

[@martinbattilana4249]

If you are rich enough.

[@samuelliao9216]

Longyi patented built-in 3 classifiers dry grinding machines already put into mass production. For limestone/dolomite/calcite The whole grinding system power is around 370Kw A.D97=4.8um (≦2um: 73.5%) Output: 1000kg/h Energy Consumption: 296Kw/Ton B.D97=6.3um (≦2um: 64%) Output: 1500kg/h Energy Consumption: 197.3Kw/Ton C.D97=7.1um (≦2um: 57%) Output: 1900kg/h Energy Consumption: 155.8Kw/Ton For Talc powder, Longyi powder grinding mill power is 250Kw, the real working power is around 200~225Kw, including classifying system. A. D90=10.5~10.7um output: 4 tons/hour B. D90=9.8~11um output: 3 tons/hour It is suitable for processing nonmetallic minerals such as calcium carbonate, calcite, Kaolin, clay, barite, talc, gypsum, limestone, calcium oxide, bentonite, dolomite etc. Samuel MP/Wechat/whatsapp: [phone]

[@hotsauce3700]

500 degree boiling water?! Water would vaporize at that temp. 212 is the temp water boils...

[@berealrelentless6237]

I thought the same thing, haha, maybe hes nervous doing the presentation.

[@norman_sage2528]

Add salt to increase boiling point

[@martinbattilana4249]

@@norman_sage2528 You can't add that much salt.

[@norman_sage2528]

@@martinbattilana4249 you are correct

[@ToddBlumer]

video and audio quality was poor

[@marieconstant6452]

PASTEUR SERME MASS CELLS = PLANTATION LA SEMENS ICI -BAS EST LA MOISSSON D'EN HAUT CELLON NO TRAVEAU BIEN OU MAL =??? QUESTION MARKED

[@marieconstant6452]

OUI DWIGHT CONSTANT WITH MR LE DEPUTY WILL KNOWS AGRICULTURE EN CREOL

[@marieconstant6452]

SIR NOT HAUT ON THE FIRE MELTED QUICK

[@KhanG-kb5ro]

If you want afghanistan soap stone, I can help you out. The quality is far better than what you are using.

[@samuelliao9216]

Longyi patented built-in 3 classifiers dry grinding machines already put into mass production. For limestone/dolomite/calcite The whole grinding system power is around 370Kw A.D97=4.8um (≦2um: 73.5%) Output: 1000kg/h Energy Consumption: 296Kw/Ton B.D97=6.3um (≦2um: 64%) Output: 1500kg/h Energy Consumption: 197.3Kw/Ton C.D97=7.1um (≦2um: 57%) Output: 1900kg/h Energy Consumption: 155.8Kw/Ton For Talc powder, Longyi powder grinding mill power is 250Kw, the real working power is around 200~225Kw, including classifying system. A. D90=10.5~10.7um output: 4 tons/hour B. D90=9.8~11um output: 3 tons/hour It is suitable for processing nonmetallic minerals such as calcium carbonate, calcite, Kaolin, clay, barite, talc, gypsum, limestone, calcium oxide, bentonite, dolomite etc. Samuel MP/Wechat/whatsapp: [phone]