Solar Panel Wiring Basics | Maximizing EcoFlow Delta Pro Solar Charging

[@everydaysolar]

Calculate Solar Cost For Your Home - geni.us/solar_reviews Ecoflow Delta Pro: geni.us/smzZiC Solar Wiring Parts Used: geni.us/oHnppd DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

[@garytrawinski1843]

It's kind of bogus. You have to give your phone number which opens you up to installers using auto-dialers to call you. I don't mind my address because I can toss the junk mail. I think you should make it very clear that people will be receiving calls...Maybe for years. I did like your video and I will subscribe to your channel.

[@docbrown6550]

One of the companies I priced for Solar panels was $65,000 for my home, It would take me 36 years to pay for that at the cost of what I pay for my light bill now.

[@jasonbroom7147]

This is one of the best explanations I have seen on the differences between series, parallel, and series/parallel solar panel connections. Your drawings and explanation were very clear and easy to understand. I do feel you left out a couple of important pieces of information for people to realize when they are determining how to wire their panels and what to expect from them. The first thing is a realistic expectation of how much power they will get from a given panel. Most panels will output somewhere between 80 and 90 percent of their rated capacity. So, your panels had a theoretical max of 1,440 watts, but when you multiply that by .85, to account for efficiency losses, you get 1,225 watts. That's about the most anyone should expect from those four panels, no matter how they are wired. The other very important consideration when deciding how to wire up your panels is shading. If your panels don't have bypass diodes to address shading issues, then wiring in parallel, or series/parallel, can ensure you get at least part of the output from your solar array, when the array is in partial shade.

[@everydaysolar]

Hey Jason, thanks so much for the feedback. Both additional points are very valid. I actually am planning on doing some testing (wired in series) with shading and talking about the bypass diodes which these panels have 3. I also have some power optimizers to compare if they make much difference since the panels already have the bypass diode capability.

[@max_tube]

+1

[@junkvista61]

@@everydaysolar Thanks for good video, I am attentively waiting for your next video that address these issues. Right now I have 4 panels that each has Voc is 37.1 and Isc is 8.58 Amp with Ecoflow DP. Currently I wire them in serial, 4 more panels waiting to be wired when I see your next video. Thanks again.

[@ksksmwbamqusuabwba2421]

​@everydaysolar I have an issue understanding and I'm sorry, but earlier the setup wouldn't work because it exceeded the voltage. But now with 4 it work because you're using amps? But shouldn't it still not work since the 4 panels still exceed voltage?

[@GreenEnergyGuyd]

​@everydaysolar did you ever do a comparison of these with optimisers on? Someone was asking about this for 2 strings and shading mitigation when charging an ecoflow. But others have reported interference in MPPT readings for the Ecoflow because the optimisers also have MPPT and cause mixed signals and errors.

[@majie1018]

To make it easy; panels in series the voltage adds up current remains the same. Panels in parallel, the current adds up voltage remains the same. Nice production. Also more sunlight equals to more output. But you have proven which method is efficient under the present condition.

[@bignastytrees]

Agree. But in the video, when the panels were in series, he added up both the voltage AND the current of the panels when only the voltage should have been x3. Is there something about solar panels that allows current to add even if the panels are wired in series (which adds the voltage of each panel that is wired in series)?

[@garywiseman5080]

This is the clearest explanation and example I’ve seen. For anyone teaching this subject, please take notes. This is how it’s done.

[@everydaysolar]

Thanks for the feedback 👍

[@santaclaracountycopwatch6824]

Dude, this video is the one ive been looking for for the past almost 2 years. Thank you so much for breakfast it down as simple as possible.

[@everydaysolar]

You bet, happy to help!

[@ВладимирПутин-е7м]

Excellent example. Love the simplicity you apply to this example. Many of us are not 'experienced electricians', so keeping it simple is GREAT. thank you for making this video.

[@KismetBP]

You are wonderful at explaining things. I actually understood this with zero experience with solar panels. Thanks! I blame KZbin for not suggesting me this channel earlier. ❤

[@georgetheavguy]

Yes indeed...You absolutely "ROCKED" this DIY Solar explanation. I watched all three videos and now have a very clear plan to install my own. Well done Scott!

[@BZackheim]

This is the best explanation I've heard for this solar generator's requirements. Thank you.

[@everydaysolar]

You bet!

[@loucinci3922]

Nice job. Helpful. Something to add at the end would have been solar panel tilt into the sun (beer can on panel leaves no shadow ) to see the max power you would get. Thanks for sharing

[@everydaysolar]

The old "Beer Can" trick. What project would be complete without at least 1 beer can 😂. Thanks for the feedback!

[@davef.2329]

Beer??? Where?!!!?!

[@danielkramer8586]

Great video. Thanks! You said in the beginning that you would talk about the disadvantages of parallel and series set-ups. What happened to that discussion? For example, aren't panels combined in series susceptible to shading problems where the no power is harnessed if even one panel is shaded?

[@chrisst.pierre8775]

Thanks for making this so easy to understand. Really appreciated.

[@everydaysolar]

Happy to help!

[@natehowe7975]

Great video. Something I was hoping you would mention is that in series, if even one panel is obstructed with shade, it reduces performance for the whole string. Parallel wiring allows each panel to fall into shade separately. But again, there are pros and cons to each approach. Also, a general statement, is that panels need to be kept clean to perform as rated. Hosing then off or even brushing them is good maintenance but hard to do on the roof. For this reason, I am very interested in mounting at ground level, or somewhere I am comfortable reaching on a ladder.

[@everydaysolar]

Good call on the shading issue when it comes to series. Thanks for the feedback!

[@sloanNYC]

Wouldn't you start using things like micro-controllers when getting to these sized systems anyway? Over 1000w feels like a tipping point...

[@natehowe7975]

@@sloanNYC The Ecoflow Delta Pro is expecting Direct Current (DC) power flow at its solar input. The power stored in it can then be output as Alternating Current (AC) by going through the inverter internal to the Ecoflow. It wouldn’t make sense to do micro inverters at the solar panels themselves because that would be creating AC power flow before reaching the Ecoflow box, which is only set up to receive DC at the solar port. For an Ecoflow, a traditional string of panels connected in series or parallel is really what it was meant to work with, whereas micro inverters would make more sense in a permanent home installation into your house wiring, which is also AC. The Ecoflow Delta Pro is intended for up to 1600 watts of solar input in DC, but it’s maximum volts specification makes that a bit difficult to reach. It’s more of a ‘portable’ setup that can serve a role in home backup, too. To your point, however, if solar panels were equipped with micro inverters and sent AC power to the Ecoflow, maybe that could feed into the regular AC charging plug just like when it is plugged into a household outlet to charge, and that charging rate would be faster than the solar input. Just not sure if the performance increase would be worth the extra hardware costs. Interesting concept, I will be thinking it through some more.

[@sloanNYC]

@@natehowe7975 Totally understand. I’m just thinking once you go so big on solar you really aren’t portable anymore and your needs may fall into a weird gap. LOL.

[@natehowe7975]

@@sloanNYC That’s the journey I have struggled with. After a long power outage I started thinking about options to prevent it happening again. My design goal for the project has been to keep everything portable enough that I could take it with me to a friend’s house if they were the one having the outage. I try to stop myself at very permanent installations that need to stay with the home, but I am also not trying to run the whole home, just critical loads. By limiting my consumption plans to a few things like refrigerator, furnace, and window AC, I can look at smaller generation. If I planned to keep central air conditioning online that would require an entirely different plan. I got an Ecoflow Delta to experiment with and loved what it can do, given that it is pretty small. Then I got into the Ecoflow Delta Pro which can flex between portable (trunk of SUV / RV) but can also be useful to a house. I do have some portable panels I can stand up in the yard in an emergency, but I am wrestling with the idea of permanently installing panels on the roof. Given that my project is more focused on redundant options than offsetting the electric bill, I haven’t gone forward with roof panels. In the meantime, I can run a lot from the EcoFlow Delta Pro through the first day of disruption, then I can refill with portable solar panels and/or a small Honda generator that I modified to natural gas / propane / gasoline.

[@williamlopez2896]

Congrats!!!. Tis is the most explicit video I ever seen regarding solar power connection.

[@everydaysolar]

Thanks!

[@lovenotcult]

I read the comment below that you agreed that these panels' specs aren't the optimum choice for the Ecoflow due to the Eco limitations. I just got the Pro and would like to know what specs to look for.... and avoid..... in four 400 watt panels to get the closest to 1600. And your drawing is the clearest wiring explanation yet - I haven't understood ANYONE else! Thank you!

[@everydaysolar]

What makes a setup easy is if you can just wire panels in series and get close to the maximum solar input wattage. For these panels I was maxing out on the voltage which meant I needed to start wiring in parallel. The challenge would be to find a panel with higher current output (closer to 15 Amps) and lower voltage output (closer to 35 V). Not sure those panels exist 🤷‍♂️

[@Mr.Excitement-gn4ev]

I just purchased an EcoFlow delta pro and four 415w bifacial Hyperion panels, they’re VOC is 37.45 and Amps are 14.02, in theory I could run these in series and my volts would be 149.8 , just shy of the delta pro’s limit of 150v. Is this a bad Idea get so close? Or am I better to run series-parallel and lower my volts to 79.9 and bring my amps up to 28.4? And if the delta only pulls 15A from that set-up wouldn’t I have to re-work the watt/law and calculate 15A X 79.9= and only get 1198.5watts??

[@vasyldudnyk8072]

@@Mr.Excitement-gn4evHi, I have the same issue). Have you fixed it already? How is looks your configuration? Thanks in advance

[@EnosLewis]

I finally found a video that breaks it down to where it makes sense! Thanks!

[@NAVY_NFO]

Great video! It really drives home the point that your system needs to be designed with the parameters of each piece of equipment in mind so that you can achieve maximum performance (i.e., efficiency and effectiveness). The PV panels you choose need to be well-matched to hybrid inverter/controller/charger or whatever load you choose. As I have found in my research and readings, there is a lot more to designing a solar system than immediately catches the eye., and this isn't even touching the NEC regulations for grid-tied solar systems. Regardless, great job...very informative at the pragmatic operational level. Thank you!

[@everydaysolar]

You bet and thanks for all the great feedback!

[@danielterry1000g]

Nice vid 👌 Could you explain why you can exceed the rated 15 amps of the delta pro? If you had a long term setup would there be any negative things associated? How would rate for inline fuse?

[@bblauter]

I was hopeful for this explanation as well.

[@kr8490]

Another waiter for such an explanation...

[@YouLookinAtMe-Bro]

Another waiter... now we need a waitress.

[@ConorLennon]

The short answer is amps are pulled, volts are pushed. So, if you push too many volts to the ecoflow, it won’t accept it. If you make too many amps available to the ecoflow, it doesn’t matter, it’ll just pull 15.

[@magnus5982]

@@ConorLennon Thanks. Do you know why they're recommending inline fuses for parallel set-ups to prevent exceeding the 15A rating?

[@Grandassets]

I am just now putting a small system together for some lights, a desktop and maybe tool charging, not big draw I went with Four 100W panels, into an 150/40 EPEver charge controller and Four 105 amp hour deep cycle batteries to kind of keep cost down, for a few days I was running them in 3P didnt bother with the last one it was just working, and even under load with clouds it was doing good, I can use everything for 6 to 8 hours with 1000W inverter and only draw down to 12.1v but if I can get a little better out of them on a little cloudy day, SWEET! I will try 2S2P next I will drop wown from 12 Ga to 10ga for even a little more percentage :)

[@offgridwshernb]

Great video explained so much I was wondering why it didn't work when did the series with 4 panels 😅

[@everydaysolar]

Yep, you can do 6 panels like this but would have to do 3S2P. You lose out on the overall power clipping but can really help in morning, late afternoon, and cloudy conditions.

[@garygeyer3861]

Thanks!

[@Netsavvy]

Very informative video I have 3 x 100w. Can I run series - parallel on them? 2 x 100 in series and the other one in parallel Thank you

[@DRBoyer-n1l]

Finally, intelligent life in the solar panel world! Thank you very much. Can anyone recommend panels for EccoFlow Delta Pro, best bang for the buck?

[@JosephZafra-dg7wy]

Is it safe to mix different brand and power panels ? I have a 160 watt ecoflow, can I combine a 200 Watt allpower? Would be charging some PS as yours

[@DaHaiZhu]

So. No matter how you configure those 4 specific solar panels, you're still never going to achieve their full power potential into the EcoFlo. Because either the total voltage (in series) is too high, or running them in parallel results in unused amperage. So, I'm assuming a better option would be to properly size your solar panels and battery power unit to avoid lost power.

[@everydaysolar]

That is exactly correct. These panels are for another project so I definitely didn't purchase them sized for the EcoFlow 👍

[@afos3462]

Well done it’s finally sunk in, regarding wiring types from solar panels. Very well explained sir. Now I will be able to understand how the systems work. Thanks Bud, much appreciated.

[@raygibson1295]

I enjoy the information given freely on this channel. It gives me confidence to tackle my own diy projects. Thanks!

[@chazb8948]

thanks for the video! You have giving me good info, just trying to keep a frig, gas stove, a small chest freezer. Would like to get a washer on it and some heat. But that may not work on a Burnham gas steam boiler. But would like to get an eco flow generator for the house to power just what I needed during a black out if it happens.

[@everydaysolar]

"Prime Day(s)" is tomorrow and the 12th. Keep an eye out as there might be some really good deals on EcoFlow, Bluetti, and some of the other larger brands in the portable power station / solar generator space.

[@dlbeers1]

I used a killawatt ez meter to plug in each appliance I wanted to know power usage over 24 hours. Best 30 bucks spent. Oh and tiny dorm fridges don’t reach take out food safety temp quick enough…..66 watts when cycling but for beer rather than food in shtf.

[@coolmanu55]

I have a sloped roof that faces east and west; in the morning, there is shade on the west, and after 12 p.m., there is shade on the east. So, if I plan 5 panels on the east and 9 panels on the west, do I need optimizers on all of them to achieve maximum efficiency or Its enough to put microinverters on the east side panels and string inverters on the west side and combine both? Another thing is - is it advisable to avoid the 5 on the east and connect all of the 9 on the west in series for higher efficiency? I'm wondering - - If I have 15 microinverters on all of the panels, will it be expensive and ineffective because we get sun mostly on the west side and no sun on the east side after 12 p.m., so what is the point of having one on the east? -i am confused.. Could you please answer? I appreciate it.

[@suzuki70]

Great video, thank you so much for spelling this all out in a way that makes sense. We’re just starting out with solar and an EcoFlow Delta, so this will definitely help.

[@Ryder-p3m]

Same here... just bought my new set up

[@chrisp1906]

I just wanted this is a great very clear, easy to understand video on setting up solar! Great stuff! Subbed!

[@everydaysolar]

Welcome to the channel, much more content to come 👊

[@markwhite6782]

I just bought my first solar generator. This helped me out a lot

[@everydaysolar]

Thanks is what we are here for and thanks for the feedback!

[@santiagopereira5969]

Hello friend, is it possible to place a delta pro 4 solar panels of 400 watts in the last way you showed in the video? In two parts of two in series panels?

[@cat1racer]

Excellent, but the math broke my brain. I want someone to do the math for me please. I have right now 4, 400w panels @ 37.5VOC on one DP and 2, 430w @ 37.5 + 2, 400w@37.10 also 37VOC on the othr Delta pro. But in the winter only getting about 850w @ 138v during peak sunlight. I have 2 more extra 430w/37.5v panels I can add. How do I do it ? Or what is best configuration ? Thanks

[@dougbarnes3602]

Thank you I’m finally starting to grasp sizing a solar panel array

[@everydaysolar]

Happy to help!

[@jiujitsuforall8627]

Thank you, sir! I've been subbed to your other channel for a long time and just recently discovered this channel! I'm in the process of building a "system" for my fridges and freezers in case the grid goes down and was procrastinating because I didn't even know WHERE to start!!! Well, now I've got great direction, thanks you, again!!!

[@ab4805]

Love your video, so clear with the diagram. Is there a limit of length for the cable between one solar panel like the 220W -Ecoflow and the Delta 2 Max and is 10AWG preferable to 12AWG? Thank you.

[@everydaysolar]

10 Gauge should have less line loss but I don't think there is a set limit on the length of wire. I picked up 10 gauge to make my own custom extension cables. Here is the one I picked up last week amzn.to/436SdE7

[@benkanobe7500]

Some folks use MPPT others Voc and Isc (I use the Voc/Isc for fear of hurting my equipment). Which is correct?

[@StaleCookies]

the trees in your yard are beautiful

[@Koi-sm3kt]

Great explanation! I got stock with my EchoFlow Solar panels, can’t find installer. Looking for licensed installer for my already acquired 8each 400 watts regid solar panels on my home.

[@everydaysolar]

Are you trying to tie into the grid or just into a Delta Pro?

[@magus269]

This is awesome information and a great video. I'm just getting into solar and this video was really helpful.

[@everydaysolar]

Awesome, happy to help. Best of luck on your DIY solar projects!

[@justineball9511]

You make it so easy to understand. Thanks

[@everydaysolar]

You bet!

[@Hollywood4Fun]

I'd like to see a small 220 volt stick welder hooked up to that ecoflow split phase outlet. Subscribed. Nice clear explainations. Thanks.

[@geod3589]

Looking at your drawings really helps me to understand whats going on.

[@babelfishdude]

Easiest would be just to use one panel. Qcells does make a 475 to 495 watt 78 cell. Which means 45 volt STC at MPP. It should also be ok for use at -30 celsius (Canada) as the open circuit should be just under 60V, which many all-in-ones do not exceed. 72 cell is ok, but I find that it does not match as well as 78. If always in hot USA, it actually makes more sense to use a 84 cell, if such a thing exists. There are many benefits to using just one ginormous panel, ease of connection, no extra wiring or fittings and no voltage insertion losses.

[@everydaysolar]

Nice, If I went that route I would probably grab 2 of the ginormous panels and just wire in series since the voltage will still be under the 150V max on the EcoFlow and no additional wiring needed. I want to place this setup in a off-grid shed where I have some outlets, lights, and battery chargers for the outdoor electric power tools.

[@bodazaphfa]

Your videos are very informative and easy for anyone to understand. You break everything down for the layman and I appreciate it. Liked, subbed, and I’m binge watching your content. Thank you for the work you’ve put in.🫡

[@everydaysolar]

Thanks so much for the feedback and support!

[@paulsoutbackgardenaustrali7674]

I just have a fridge that uses 200watt...can u make a video on getting the right system 4it?

[@Sentinel48]

Incredible video. You are doing some great work explaining all these different solar concepts. So glad I found your channel

[@Dave-xr9bc]

I always thought the current was the Imp if u connect in parallel .Thanks again, learned something

[@prosperityokechukwu1503]

This is the best explanation I've seen on wiring 😂

[@everydaysolar]

Thx!

[@ComicsandThings]

Great video. One question though. If your doing series and parallel. The top series connection has 3 solar panels with the 45V, and the second series only has 2 panels with the same 45V then how would you calculate the Volts?

[@highlanderes]

I am guessing the parallel comfiguration performs well in cloudy conditions

[@juniorwhite1671]

Thanks for your update, I have 3 265w solar panels and 2 190w solar panels how can I connect them

[@kuzushisakuraba2719]

What inline fuse do i get , 15 amp or 30 amps ?0r 40 amp. ? And hey can you tell he where you got the Helien 360 panels i cant find them anywhere, they are kool .

[@ngufra]

It would be nice to see the effect of shading on one panel in the case of series or parallel connections.

[@JenkinsUSA]

Exactly what I was thinking. ❤

[@justinsmith7931]

Hello. Thank you for the tutorial on this. It was perfect. How do I get around my scenario. I have an RV with 3-180W panels connected to a 40A solar charge controller charging 2-200AH Lithium batteries. How do i get the solar power to the Delta pro in this scenario?

[@everydaysolar]

Do you just want to charge the Delta Pro or are you trying to integrate it into your existing setup? Do you currently have an inverter connected to your 2 X 200AH batteries?

[@justinsmith7931]

@@everydaysolar There is a Xantrex 1000W inverter in the system that runs nothing but the residential fridge. I ultimately would like to incorporate it into the existing setup. Unless you think there is a better option or setup

[@workinghonlon]

Does going over over the max current or wattage damage the power station？ Sorry if this seem like a silly question.

[@teuton6167]

Going over the maximum voltage risks damaging the power station. Going over the maximum amps is ok because the power station will only use 15 amps and ignore the rest. Wattage is just volts x amps. The power station will limit watts input automatically.

[@workinghonlon]

@@teuton6167 thank you for your answer so does that mean I could parallel the solar panels as much as I like (since paralleling the add on the amps but not the voltage) are there any disadvantages to paralleling? If my understanding is sound, then I should try to maximize the voltage(without going over) and keep the amps over the maximum at all time to get the most wattage?

[@SteveJones172pilot]

What is the max distance I should expect to go between the panels and the ecoflow unit? I'd like to put the panels on a shed in the backyard rather than on the house itself, but that would give me a DC run of about 200' or maybe a bit more (House is still being built, and shed doesn't exist yet!) Is the resistance going to kill me on that? Also, in a different video I saw you using the ecoflow pro ultra unit and you mentioned charging the batteries through the smart panel, but didn't talk much about it. Is it true? I could get just the ecoflex pro ultra and the smart panel, and it would just stay charged to use in case of a power outage? Thanks for all your videos - I just stumbled upon your channels today and have learned a lot binge watching probably 2 hours worth already!!

[@Papa-bh6zq]

The 15 amps of solar limited by the Ecoflow Delta Pro would be ok on a 10awg USE-2 solar wire run 200' or more. Not the most efficient. Could you put your Ecoflow in the locked up shed? Then run the AC output to the house. DC loses power over distance, AC is greatly more efficient over distance Look up Nicola Tesla AC vs DC, the NY Worlds Fair 1893 😊

[@SteveJones172pilot]

@@Papa-bh6zq Yeah, that really is what I am thinking I am going to have to do.. and for those reasons. My issue is that at least at first, I may not have any solar, so I'm not sure how I'd charge it, especially if I'm going to have to have a main-cut off in the house panel to isolate the shed when it's not powering the house. If I put at line from the house to the shed, then another from the shed to the house (Same conduit, opposite current flow) maybe I could do that. I dont know.. I'm going to have to think about this for a bit. Maybe the answer is that the battery stays in the house as a battery charged from the grid, until/unless I get the solar on the shed, at which point I would move the battery to the shed and forego the ability to charge from the grid. I'd just run the shed from the battery all the time, and use it on the house generator input as needed.. Lots of options... none perfect, but fun to work through to find the best!

[@Papa-bh6zq]

@SteveJones172pilot Put the Ecoflow Delta/Ultra in the house with an Ecoflow Smart Panel and run the Solar DC wire 10awg from the shed. This way, it will charge/ discharge off the Smart Panel automatically in Hybrid mode. Size your solar for up to 150voc and 18 to 20 amps. The Ecoflow will only draw the 15 amps it needs, so voltage drop will not be an issue. The Ecoflow will provide battery backup, and solar charging can be added later. Have fun

[@Papa-bh6zq]

The underground 10awg wire must be THWN stranded wire, not the more expensive USE-2 Solar wire for UV protection

[@Papa-bh6zq]

You may look at the EG4 6000XP to be more economical.

[@maisyray]

Living in CA requires me to connect to the grid. But in a power outage i can't use my 6k solar array as it requires 120v to run. What do you recommend to be able to use my solar in a Power outage? I'm using micro enphase inverters

[@everydaysolar]

Yeah, that is a super common problem for a lot of grid-tied systems. The most common would be investing a significant amount of money and get the Enphase battery backup system with the needed hardware. I hope we get a better solution soon but right now that is it.

[@TX_Eric]

so am I to understand that in theory 3 panels in series would put out a total of 145.8V * 9.4A = 1,370.52W ?

[@everydaysolar]

That would be if you added up the Open Circuit (OC) voltage and used the Short Circuit (SC) amperage. In practice plugging these 3 panels into the EcoFlow delta pro it will adjust voltage to reach the Maximum Power Point (MPP) and this will result in the optimal power output. In my area on a nice sunny day each of these panels would adjust to around 40V and 8 Amps depending on intensity of the sun. So if we used those numbers we would get 120V at 8 Amps or 960 Watts which with a few losses from wires and connectors is close to the 890 Watts I was seeing. Sorry, this info would have been good to include in the video and good question.

[@TX_Eric]

@@everydaysolar Thanks, what is a good place to get decent panels online, the sites I have visited usually have a minimum and work with larger orders I would need only 4-5.

[@popatop75]

off topic a little, i have a ecoflow 1000 delta 2 can i charge my jackery 500 with it and what would i need to do that thank you

[@everydaysolar]

Sure, you would just use the 120V wall plug from the Jackery in the 120 20-Amp outlet from the Ecoflow.

[@mr.timjohnston546]

could this also be done the same way if you were using 2 100 watt and 2 150 watt panels together?? THX

[@shafiqqambrani4879]

For my 3 kw system I have installed 16 awg PV wire with 7 plates of 330w in series. Should I reduce the wire gauge or not

[@chrisd7579]

What was the orange tool you used to take apart the connectors?

[@everydaysolar]

Just a standard plastic MC4 tool.

[@drinks777]

During the parallel portion of the video you exceeded the 15A limit on the delta pro. Does this mean it doesn't matter how far you exceed the current because the delta pro unit will just bottle neck it anyway? I want to connect 400W panels to my delta pro but they are 14A each and I want to connect them in parallel since the will be facing different directions... Will I have problems with this?

[@isaacperalvillaverde1986]

Hey did you manage to wire those at the end? I am thinking of doing the same

[@drinks777]

@@isaacperalvillaverde1986 my panels are still collecting dust as it is the rainy season where I am. I'll probably get around to it in November

[@Hangoutwithcooper]

Thanks, clear explanation… I have 3 of 400 watts… can use 2 in series and last panel connected to rest of open wires? Thanks

[@everydaysolar]

What is the Open Circuit Voltage of your panels? You should see the Voc called out on the data sheet usually located on the back? Also, are you bringing your panels into an Ecoflow Delta Pro?

[@SeanOliver5981]

So my question about this is in regards to the panels. If i keep my panels below the 150VDC limit but am generating 2000 watts or more can I still connect to ecoflow without causing damage?

[@carlosantoniodeclet8005]

Hello. I have three flexsolar 360w foldable panels. I can't set them up in vertical position because being foldable they wouldn't hold up a 90 degree angle. My question is, if I set them up in horizontal position, would it be the same procedure to connect them in series? 🤔

[@errndog]

So I'm using First Solar, Inc Flextronics FS-6435A solar panel. Says 435 watts on the back of the panel. I guess I can only use 3 panels? I've got 435 watt panel, Voc 219.6 and Isc 2.55

[@everydaysolar]

Oh man, that is a high Open Circuit Voltage. I don't think that panel will work with the Delta Pro since the maximum voltage for the solar input is 150V. If the voltage is above 150V the Delta Pro will shut down the solar input.

[@noahortiz6165]

If I’m using the delta pro with 2 400 watt solar panels, How should I set them up? Series or Parallel?

[@kennethmartin7853]

That's what I'm trying to figure out too ? Seems like parallel would produce more watts but amps is still below 15 amp

[@Godfather44055]

Awesome video....what gauge wire did the electrician use to install the smart panel 12feet from the existing panel?......I would install mine about 25 feet from my existing panel.

[@ViKingOutLDR]

Great video and explanations. What is the orange tool used 6:25 into the video called and where can it be ordered ?. Didnt find it at the provided Amazon link. Please advice as I need it for my Ecoflow setup.

[@bryanbryan01]

I own two EcoFlow Delta Pros. Is it necessary to use individual XT60 cables for each unit, or is there a method to link both XT60 ports on each EcoFlow Delta Pro to a single cable?

[@everydaysolar]

Hmmm, I just use individual cables one for each unit.

[@neomatrix2722]

I love this video so much I have a question can you help me understand open circuit am I correct in visualizing like a complete circle like it's a complete circuit like a loop is that what you mean by open circuit

[@TKPAWARRIOR]

Outstanding job ! Lets talk cable gauge . . . Recently melted my 10 AWG gauge 2x50' line MC4 connector's where they meet for some unknown reason? At the time only one 430 watt solar panel was connected on a clear sunny day? So may I ask your opinion why this happened and what gauge do you run 8 or 10 AWG?

[@1Darkvictory]

Are there any "fail safes" in connection(s) between the panels and battery/power supply to prevent discharge of the battery when there is low to no illumination for the panels?

[@zenniz1992]

The charge controller connected inbetween the solar panel and battery will have protection features. You CANNOT, i repeat, CANNOT connect the panels directly to the battery.

[@xxkasperxx]

I have 4 100 watt renogy panels...can I use that brand to charge an ecoflow?

[@SeanOliver5981]

Would it be possible to have a 300 watt panel but at 12v? I myself wanna get close to 1600 watts on this as well.

[@A.C.71]

So just using the ecoflow wiring kit and the ecoflow delta pro will not be automatically optimized for lets say 2 400 watt portable panels?

[@newguy6935]

Wow! Very helpful. Was confused about this part and this vid really helped me to understand all this.

[@everydaysolar]

Happy to help!

[@BucolicAholic]

What if you have a metal thing that you need to put another thing on? Would I use one of those things from Home Depot or make it myself? I'm running a something or other thing for reference.

[@timdougall5415]

I have seven panels (to fit roof size max) does that mean that I have to wire up in series?

[@1unsafer]

Hello great video. I was wondering if you can combine 24v panels with 12v using series parallel? I have 4 12v panels and 2 24v. This is on a 48v system, controller can take 150v, 3.2k watts, 60amps. Question is more about the panel voltage than anything. Obviously the Voc and all need to work first. Thank you

[@shawncontreras]

How would I run 3 220w ecoflo high capacity panels to a delta pro 3 for the best option for a home back up pass through energy

[@tdg911]

What is the name of the connectors where you connected via parallel?

[@t-hex6876]

This is the video I needed! Thank you 🙏.

[@everydaysolar]

You bet!

[@carolmaplesden916]

So I am a rookie and know nothing I bought the Eco Delta pro and one of their 400 watt panels my question is if I get another 400 watt panel would it make more sense to run them in parel or series maybe I should clarify i am using this for my shorty motor home

[@everydaysolar]

You could run them in series as that will be below the 150V max for the Delta Pro and the easiest to wire up.

[@carolmaplesden916]

@@everydaysolar thank you 👍

[@mrgmrg9375]

may i ask what is the total current going into the ecoflow unit ? 13.3 a ?? thanks

[@WesleyL95]

wait... with his panels he is using wouldn't the series parallel total voltage still be over the 150volt limit of the Delta Pro thus risk damaging the Delta Pro Charge Controller?

[@adamsisernik4556]

I bought EcoFlow balcony solar power plant with 3.600W Delta Pro storage, 800W inverter and 2 x 480W Bluesun (37.1V) solar panels. When the power plant is connected throw inverter to the network, can I connect the third panel, which is not part of the solar plant ,with a power of 480W (37.1V) directly in the XT60 input to the Delta Pro for extra charging?

[@GMC-qo9xi]

I have a question. I bought the Delta 2 Max and it has 2 solar inputs that it says can take 500W each, so total 1000W, but then it says 60V max and 15Amps max. So my question is how many 100W solar panels can I connect if they are rated 20V max and 5A max and what is the proper configuration?

[@everydaysolar]

Nice, I am looking at the Delta 2 and Delta 2 Max now. I would probably shop around for a panel that would be a bit larger where I could simply string 2 or 3 panels in series into each of the 500W solar inputs. If you had to use 100W panels you probably would be looking at 2 panels in series and then bringing together 3 of the sets of panels in parallel for each solar input. Again not ideal but remember voltage is a hard limit but the Delta 2 Max will just throttle the current so your system can add up to more current as compared to the unit specs of 15 Amps Max. That would be a total of 6 panels for each solar input but the wiring will be a little more complex and don't forget to size some inline fuses.

[@GMC-qo9xi]

@@everydaysolar thank you very much for responding. I’ve been trying to get straight answers from Ecoflow and a couple other places (people) to understand how to size properly. (The example panel specs I’m using is from a company selling the Delta 2 Max with 10 of these panels... I called them to ask how they configure it, but to no avail, they said a tech support person would call me back.) To clarify, in your configuration choice it would have 40V @ 15A entering both inputs? (=30amps) Questions to help me understand solar wiring logic: 1. Would that mean 15amps is theoretically not being used? (Hence why you said not ideal? Or is it the 200W extra.) 2. Why not string them into 2 60V strings (series of 3) each, instead of 3 40V strings (in each input port). (Is it too close to maximum voltage for your comfort?) 3. Can you parallel a series of 3 with a series of 2? Like 60V series with a 40V series. 🙏🏼

[@GMC-qo9xi]

@@everydaysolar i gave Ecoflow the same example (100W) panel and asked if I could hookup 10 of them. This is what they just responded with: “We recommend you use 8 100 W solar panels to connect with Delta 2 Max. You can divide 8 solar panels into two groups. One group for one solar charging port on the Delta 2 Max. You can put the 4 panels as a group into 2 sets of 2 solar panels connected in series and then connect the 2 sets of solar panels in parallel.” So I still have one question: what would happen if you connect in parallel a series of 3 with a series of 2? (Would the voltage then drop somewhere between the ~40-60V? Or would something blow up? I’d love to know how this works!)

[@johngore8443]

Hi, really great explanation on the wiring setup, i have a question regards to the flexible solar panel to the solid structure panel, do know if they produce the same amount of of power ?

[@hanz2lk]

great breakdown, very easy to understand.

[@everydaysolar]

Thanks!

[@mattbishop7796]

It doesnt matter that the amps are over the rated limit? Ecoflow automatically reduces to 15 amps?

[@everydaysolar]

Yes the charge controller with throttle the current limiting to the maximum the unit can handle.

[@mattbishop7796]

@@everydaysolar does that go for the other parameters as well? Can I hook a 2000 watt solar array to it and it will only allow 1600 in?

[@lpsbbydb]

So it is ok to go over on amps with parallel connections?

[@todavidjensen]

How can I set up a consult with you guys? I have some equiptment but am not sure I have everything I need and dont want to be in trouble when they are needed.

[@wesleywebb3544]

I have two Ecoflow 100 watt rigid panels and a delta max. I want to be able to operate basics during an extended power outage or a tiny window AC. What else do I need to have? I’m going to get two more panels. Any advice would be helpful.

[@benkanobe7500]

Another question (please): Your EcoFlow handles over current, but not over voltage. I have cheap grid-tied inverters with limiters that have a max of 1000 watts output each. They have very low voltage maximum input so my 320 Watt panels can not be put in series. I have a number of them wired in parallel so that I can have at least three panels per inverter. I would like to put four panels per inverter but it would be over the max current input the inveters are rated for. Can I safely "over-current" my inverters by adding the fourth panel without fear of hurting the inverters as they will "current limit" and protect themselves? (Assume I have all the fuses, disconnects, ...... in place). Thank You!

[@mb345]

Great channel! Thanks for putting all this together. Super helpful.

[@everydaysolar]

You bet, thanks for the feedback!

[@stephenchasse5880]

Couldn't you use 6 panels? Two strings in parallel of 3 panels in series to get the max? The voltage should be good 48.6 x 3 = 145.8 and amps 9.4 x2 = 18.8?

[@jober112]

Are you using both inputs on the ecoflow unit or all panels into 1