Finally an Indian video on this! Happy to see this! Good going guys! Instead of fresnel lens, try mounting the engine + motor on a parabolic mirror with sun tracking system and you're set for free electricity!! Hurray! 👏👏
@anttumurikka87284 жыл бұрын
man, you need price for this
@kingdommusic54562 жыл бұрын
No one knows the exact day hour /But we can see the signs events all around us. And by the timeline, Israel is 80 years and 1 generation span according to bible text will be around 2027 , which israel was declared first in 1947 + 80 years = 2027 . so we know we dont have 10 years left as this is 2022 so the rapture, then the tribulation will be before 2030 for sure.The rapture will happen without a doubt and it will happen much sooner than many believe (less than 10 years according to all the environmental, weather,astronomical signs ,israel timelines etc showing ). It will happen without any warning , not one , in an instant , catching masses of people off guard just like God always does, ie the flood ~ a rude awakening . No one knows the exact day or hour the rapture will happen is a certainty . THE RAPTURE CAN HAPPEN NOW at ANY TIME make no mistake !! . Please awake to Christ Jesus which is the ONLY hope NOW and dont let it be found out it IS all true later when its too late & many have been left behind in the most terrible times the earth Has Ever experienced Before and ever will...for anyone who sees this and doesnt know what to do please If anyone hasnt given their life and heart to Christ Jesus will have REAL BIG problems way bigger than any problems Ever had If left here on earth after the Rapture . After the Rapture The USA , Worldwide , will face More evils , Inner city chaos, firearm wars etc etc ,power & water , food shortages , military invasions,mass executions (yes much blood will be required by antichrist ) etctec than it Has EVER been seen Before and you surely dont want to be Here then . We Have Time NOW to change , please seek Christ Jesus while there is still time to save ! no one knows the day or hour of the rapture it will start out just like any other day and it will Take Place In the day In Broad daylight/sunny day , In an Instant FLASH without ANY warning ,& there will be peoples Driver Ids, cell phones ,wallets found in various parking lots,Purses, bill folds Found at work etc etc with NO explanation , and People VANISHING so No One can refute it has taken place. .romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead thou shall be saved! please share with others =IMPORTANT raptureready.com Information for anyone who has come across those that refute the rapture and say that it was supposedly made up and say it was created by darby church in 1700s . This is real good to show it was way before darby , and its documented . also rapture pre trib proofs even in dead sea scrolls .15-1700s/ irenaeus 170ad/ 250 ad / /isidore 4th century sourced by intense search and study by ken johnson kzbin.info/www/bejne/m2Kxp2Cue86abqs
@graxav4 жыл бұрын
Heat the hot side with solar powered elements - and have a water drip feed to assist cooling on the cold side - should improve wattage. Off the shelf pneumatic cylinders would simplify construction too - good video well done for getting it done!
@punkinhaidmartin4 жыл бұрын
Nice engine. Make it do work. Melt a salt with the solar and immerse the hot end in the molten salt. Insulate the salt vessel to make the engine become the path of least resistance for the heat that is leaving the system. Pump water with the PTO. Use the pumped water as a coolant.
@abdulmohsin28874 жыл бұрын
Mark sir have your full knowledge about this project?
@punkinhaidmartin4 жыл бұрын
@@abdulmohsin2887 All I know about this project is what I can see in the video. It appears to be a gamma type Stirling engine using concentrated sunlight as a heat source. Much of the heat is being wasted, the temperature differential is not being optimized, and the torque is not being put toward any apparent use. Showing that a Stirling cycle can convert heat energy into mechanical energy was accomplished on a commercial scale in 1818, so why not at least try to improve a bit on that? The torque available from that engine might run a very small pump, so why not dump heat into the water that is being pumped? Why not pump a mol6tin salt or metal to bring heat to the engine?
@AshutoshSingh-to9vx4 жыл бұрын
Good suggestion Mr warlick. I might try this if I build a Stirling engine
@punkinhaidmartin4 жыл бұрын
Ashutosh Singh great! Let me know.
@anttumurikka87284 жыл бұрын
how long it last?
@TheParceo2 жыл бұрын
Excellent, always in these videos I have the same question. How much electrical energy or work in an hour is the equipment capable of producing? This aspect of the experience is always missing. Thanks for the video. Greetings
@rolandobasaca71674 жыл бұрын
You can spray water in the air to find the focal point much easier! This can be useful and important, especially when making a sterling engine.!
@punkinhaidmartin4 жыл бұрын
Smoke works too.
@Sachinkumar-hy3ti3 жыл бұрын
How can i know focal point by sparying the water???
@RustyInventions-wz6ir10 ай бұрын
Just found your channel and Subscribed. Really nice work.
@mehulshyam4045 жыл бұрын
Very innovative idea Making mechanical energy out of solar energy is a great thought Just 2 challenges... 1.Getting the focal point onto the cylinger when a vehicle is moving 2.controlling the rpm of the engine Great initiative...work on it dude...gud luck
@____Mdd5 жыл бұрын
Thanks for kind words. Challenges? Not just two! The Stirling Engines are low torque engines, if we want them to use in real applications we need to make many modifications and also need to utilise other form of energy and combine output of both (that was topic of our previous presentation 😉). For your questions, 1) For solar energy utilisation, this engines are best suitable for stationary applications. For non-stationary, we can utilise any form of heat energy like biogas is first priority for low cost and eco-friendly energy, we can also use heat of flue gas at exhausts. 2) as mentioned before this engine require development for increase in work output, we were working on combining two energies. This will help in increase in work output and we can add attachment like governor to control speed/torque.
@claybornlewis2765 жыл бұрын
It doesn't have enough power to push a pissant off of a stick
@dannybenhur61234 жыл бұрын
Mehul and Mehul...lol..quite a unique name and both mehul talkings to each other is also rare... Back to subject may be not for a moving car...but we can use it to generate electricity and charge electric car batteries...
@davey2k124 жыл бұрын
Needs a flat plate welded to that bit that catches sun lol we too power hungry for these things to be useful. Would have to scale this up and make like a rotary engine or something with like 10 of them but would need extensive upgrades including heat source
@rogueart77064 жыл бұрын
Totally awesome stuff!!! I been wanting to do this ever since I seen Greenpowerscience do it. That flywheel looks way too heavy for that engine....throw it on the lathe and cut at least half of that mass. Taller skinnier flywheels are much more effective than short fat ones. Thanks for the inspiration, I think I'll start cutting a crankshaft for an alpha engine today...yahoo
@asifhussain79594 жыл бұрын
put one owl down shape mirror on the floor which will redirect the light to the Stirling engine heat point which can avoid over heating on motor /land
@mytickets4 жыл бұрын
very nice, Hope to see it making power soon
@AshutoshSingh-to9vx4 жыл бұрын
Stirling engines are my favourite. And the one that runs on solar energy, even better Nice project
@dilasgrau64334 жыл бұрын
In theory Stirling engine must be derived from the stirling thermal power cycle which had been in studies for long but had not been developed due to its limitations to be of practical value. Nice demonstration.
@mandanitushar51524 жыл бұрын
Nice project Can you say wherever selling of Fresnel lens in india ?
@shivalokeshanupoju57174 жыл бұрын
Nice bro good to see such sweet invention proud to be an engineer
@Rish07164 жыл бұрын
That's cool..🤘..What about calculations and design part..??..It would have been great if u would explain the main engineering behind it..The calculation part 💯👍..
@vivekdarknight60244 жыл бұрын
Innovative... If you get better Effeciency than Solar pannel...You can Patent and market it...
@Aftabansari-12 жыл бұрын
This Stirling engine give me buy link please please please
@funny1048youtube4 жыл бұрын
impressive engine, especially since it's unpressurized, to raise the power of this engine for it's size without having to add pressure you could increase the compression ratio by either increasing bore size relative to piston stroke length or lower the phase angle lower than 90 degrees
@vedantkoparde97113 жыл бұрын
We really need this for our project
@guruprasad-mp5un4 жыл бұрын
You have to coat the material of cylinder with pitch black material to get more incident of solat radiation
@motoresesistemasautomatos.5 жыл бұрын
Very nice, self-sufficient Stilirng. Congratulations and registered.
@lawerancelanham5 жыл бұрын
Should do a test and see how much power it'd generate if you put an alternator with to it.
@LionelDucrue Жыл бұрын
Congratulations on the engine! What is the power of the motor and the dimensions of the lens? Could you send me some drawings? Thank you in advance.
@compostsfertilizers54712 жыл бұрын
What is the maximum power (WATTS) can it produce ?
@leoncillus3 жыл бұрын
Need oil protection? Thanks.
@RaviTrek4 жыл бұрын
Fantastic work, We suggestion will be use sun tracker for more effective result..Good Work..
@dannybenhur61234 жыл бұрын
Good work
@kishorekumar29524 жыл бұрын
Nice work guys, kindly sare the details of engine it is useful to understand the video
@ashirbadsahoo91384 жыл бұрын
My suggestion for this project will be jst do a fully setup having solar tracker, something to give the initial torque and sensors to adjust the position of the engine automatically.also instead of waiting for the cylinder to heat up to the point u can jst give the starting temperature to the system .once the system is heated enough u can turnoff the starting input and let the engine work using solar energy by maintaining the same temperature.
@rohanmude89964 жыл бұрын
Sir iska rpm kitna hai aur ye kitna dur tak pani fek sakta hai
@MrAllrounder8045 Жыл бұрын
You wanna sale this project?
@KAMLESHPATEL-mj9cp4 жыл бұрын
Good job 👍👌👏
@levettp4 жыл бұрын
How many watts can engine make with direct flame heat?
@romanfuller11824 жыл бұрын
Can this be used in conjunction with an inefficient but highly self recycling steam engine so that they become one highly efficient piece?
@sujitsinghrajput64264 жыл бұрын
Good job per kuchh aisa karo jisse subah se Sam tak sun light ko kisi v disha me ho per required area me consentrate ho kar mile. Jaise wind energy me hota h.
@aydaawadi2093 жыл бұрын
could you help me to find from where could i buy ready stirling motor like this
@raydan183 жыл бұрын
can you provide exact manufacturing schematics and parts? I can also purchase ready made model. How much?
@hrishikeshpingle4 жыл бұрын
What is the power output?
@UrgenthelpwithSubscriptionsHel4 жыл бұрын
Why you don't add chrome mirror stainless steel with insulation to trap the heat into a mini barell bellow the cylinder? And with a glass on top, you ll have constantly temperature.
@michaeld9543 жыл бұрын
What amount of torque does it produce
@منتظرحيدرصالح-خ1خ Жыл бұрын
How many watts can be generated?
@Poketrainer924 жыл бұрын
this is the Alpha type I think because it has two separate cylinders and two pistons. Gamma type has one displacer and one piston. I could be wrong but someone can confirm?
@marguenst4 жыл бұрын
Excellent project Where you get such a large Fresnel
@shubhammali62064 жыл бұрын
Best project Which gas is used as working medium ?
@pratapkumarmishra82974 жыл бұрын
Don't know about this engine but helium and argon are the best choice for maximum efficiency
@bharath54384 жыл бұрын
Nice wrk
@abhishekdrolia13853 жыл бұрын
Nice 👍
@pauloinventostube75334 жыл бұрын
Ótima idéia 👍
@dibolic10004 жыл бұрын
What out put of stirling engine and rpm in Watts or hp.
@anttumurikka87284 жыл бұрын
so you can put replace wheel magnetic rotor and build stator around it
@saivenkatreddy91434 жыл бұрын
Good work Guys..
@mahmoudbouafia78933 жыл бұрын
Where i can buy similar engine ? Pleaaaaase
@abhijitrashinkar4 жыл бұрын
Good work, I appreciate your efforts, keep it up.
@alecdsouza3544 жыл бұрын
What's the cost of whole setup Including solar concentrator?
@mohammadaweessanadi20444 жыл бұрын
Can you please provide the whole abstract for this project
@flyingfox80724 жыл бұрын
From where did you get the Fresnel lens.?
@chhabirai36834 жыл бұрын
i need like this engine how can i contact you
@calvinowens94044 жыл бұрын
Where did you guys get that giant Fresnel lens?
@jeric_synergy85813 жыл бұрын
Old projector tvs have Fresnel lenses as part of the screen.
@calvinowens94043 жыл бұрын
Thanks!
4 жыл бұрын
aslında bakırdan (Cu) geniş bir hava ısınma haznesi (air heat pool) yapılıp 40*40 büyüklüğünde şekilide arası hava ısınma haznesi o piston yeri ne monte edilebilir. o zaman güneş merceğinin yerini sık değiştirmeye gerek kalmaz.
@AnilKumar-lt4uk4 жыл бұрын
Heat absorbing point should be big enough to get better focal point
@satya-dj8ji4 жыл бұрын
Can be use another ges in chamber
@Countrysideboy2474 жыл бұрын
Nice work! Do try the beta version,which is a bit compact!
@rehaansatyagrahi97764 жыл бұрын
What's the power output of the engine bro?
@akb40764 жыл бұрын
next improvement, make water pump with auto solar tracking out of it we can convert our dry lands to greenery
@kanagantisunny64474 жыл бұрын
Its one of the Indian vedic science this experiment use in puspaka vimana
@pranavtv16153 жыл бұрын
This is alpha type right
@syedzaminhussainnaqvi4116 жыл бұрын
very nice bro
@____Mdd6 жыл бұрын
Thanks :)
@surendrabharati33674 жыл бұрын
How much it's brake power ?
@kenbk10002 жыл бұрын
Looks like fake news to me no contact info, no price, no plans to build it, just a neat video, what gives if its avaialble where is, how much is it, and how do i contact you for info. Guess it really doesn't work execpt in a video
@jaydevsingh30674 жыл бұрын
Free Energy Device But this time a real one
@vedantkoparde97113 жыл бұрын
Can i buy this from you
@Thunder-A-jay4 жыл бұрын
Yeh konsa material hai jis per sun light aa rahi hai
@Sachinkumar-hy3ti3 жыл бұрын
Fresnel
@LCMNUNES19624 жыл бұрын
VRRY GOOD MOTOR, BRASIL OK.
@jaydipvasani4 жыл бұрын
Amazing
@Lokesh_Anudeep4 жыл бұрын
Can you explain how this actually works,
@sanjayupdhyay71803 жыл бұрын
sir can you share design report?
@DeepakSharma-ls2ms3 жыл бұрын
Sir please share the parts size and design for make an another project for college project
@sajidkhan62433 жыл бұрын
Kr le copy
@sajidkhan62433 жыл бұрын
Haweli pe aa jana ..
@mantechvlogs59024 жыл бұрын
What if you boil water by solar energy and make steam.then use steam to generate power.
@gauravpardeshi55734 жыл бұрын
Is it still running?
@gustafromanov78605 жыл бұрын
I like your Fresnel's, how much did you get it?
@____Mdd5 жыл бұрын
Asking about temperature or cost ? anyway it cost 5500 INR / nearly 78 dollars, and it can heat 1200°C maximum at focal point.
@wadehutchinson19635 жыл бұрын
get them free out of old boxy big screen tv projection typei have 2 i melt brass
@Sachinkumar-hy3ti3 жыл бұрын
@@____Mdd how can i get these Fresnel in Vadodara, Gujarat??
@girishgohil95296 жыл бұрын
👍👏👏 keep it up
@____Mdd6 жыл бұрын
girish gohil thenkyu :D
@kishorechowdary76264 жыл бұрын
How it works ?
@mohammadwaleed40374 жыл бұрын
how to make this engine
@nelsondarwinpaktech39544 жыл бұрын
u can make stirling but before that u must make a simple syringe piston based steam engine...thats so simple and can consume around 1 hour...
@ashvanikumar97164 жыл бұрын
How to work and this concept
@RudraSolarEnergy5 жыл бұрын
Nice one
@numeric.alphabet2 жыл бұрын
Maksudnya bukan tutupnya coupling Dan persneling
@s.k.shouryamishra95544 жыл бұрын
Can u help for make this
@claybornlewis2765 жыл бұрын
That's all fine and dandy but now it doesn't have enough power to do anyting
@adcdo2 жыл бұрын
Solar Stirling Engine | GTU Mechanical Project😃
@milanajani27906 жыл бұрын
Good job 👍 bro...
@____Mdd6 жыл бұрын
Milan Ajani Thenkyu :D
@daviddavids28844 жыл бұрын
F Y I 1) it should be understood that this is an iteration of the 1st, ALPHA, stirling cycle heat engine configuration. it should be understood that The Distinguishing feature is the 90-degree offset, in the Orientation of the cylinders. 2) it should be understood that the low quality of this engine will Always lead to LOW levels of performance. at link, compare the rpms achieved, using soda cans. 3) of the three possible stirling cycle configurations, the Alpha (1st) is, mechanically, the simplest; as a result, it is also the Most efficient. 4) you boys Should consider the use of an asymmetrical parabolic reflector, in order to deliver heat more precisely and at the lower surface of the hot cylinder. see the shape of a satellite tv 'dish'. 5) the orientation of a reflector Should be such that the tendency of heat to be conducted into the engine frame/structure is Minimized. a shield could be utilized. 6 at link, engine performance was slightly attenuated, because the flywheel was (stoopidly) caused to be out of balance. googletranslate kzbin.info/www/bejne/o5fcp5drgM10Zs0
@numeric.alphabet2 жыл бұрын
Misalnya torque adalah berbanding lurus dengan jari2x
@madmuscle11855 жыл бұрын
I want to contact you... About this project
@Sachinkumar-hy3ti3 жыл бұрын
You guys are giving no reply to us. I have written three emails to you guys pls reply naa bro
@sandeepjain60275 жыл бұрын
how many kilowatt this engine
@____Mdd5 жыл бұрын
Stirling engines are low torque engine, we haven't checked by testing but as per our calculations it can give about 150 watts when heated at maximum temperature..
@abumujihaja69555 жыл бұрын
Need one reflecter bottom
@daviddavids28845 жыл бұрын
at 1:40, Huge and Massive pushrods equals WHY. all moving components SHOULD BE AS LIGHT AS PRACTICAL. THIS IS NOT A COMBUSTION ENGINE. low speed suggests this engine design is less-than optimal. and the flywheel is TOO massive. googletranslate
@____Mdd5 жыл бұрын
That is connecting rod made of aluminium and that does not weight that much. We know flywheel is big but thats for reason in our design..
@joeldsouza48605 жыл бұрын
@@____Mdd could you get in touch with me on 8147004445. I'm from Karnataka. I may have an interesting offer.
@claybornlewis2765 жыл бұрын
Doesn't matter how you build it doesn't have enough power to push a pissant
@rudyruiz95212 жыл бұрын
David, between this and your other comments I'd gather you are experienced in building them. Where are your examples?
@fayazdharwad59995 жыл бұрын
How to purchase it both products
@____Mdd5 жыл бұрын
We made it for our engineering final year project, if you want Stirling engine, then we can make one for you. That lense is available from manufacturers, we bought it from Ahmedabad (Gujarat, India). Contact me on m.d.dodiya.5@gmail.com
@saeedthabit82784 жыл бұрын
@@____Mdd some SE are used to run up to 25 KW, you made a good start, wish you luck in producing a powerful SE with generator as the market is huge. Waiting for the good news.
@mudassirkhan75905 жыл бұрын
Where can it be use?
@claybornlewis2765 жыл бұрын
Absolutely nowhere it doesn't have enough power to do shit you can stop it with your hand
@sivaboddu7724 жыл бұрын
I want this engine.How can i contact you.
@basilepannellas-mrmusic.80224 жыл бұрын
Καλη πατεντα,αλλα οταν η εστια μετακινηθει,πρεπει να μετακινηθει η κατασκευη.