SolarEpic EPEVER MT50 Remote Meter LCD Display

[@ChristianSchmid]

How long is the included cable? Can it be extended? What is the maximum cable length?

[@SolarEpic]

Attached cable length: 6 feet, we recommend you extend the length no more than 30 feet

[@SolarEpic]

Normal ethernet cable (8pin) cat 5 or 6 cable will be fine

[@mirriulahwaterdog]

Does equalisation work on the date input of is there a manual override.

[@SolarEpic]

Hi, the system time Settings are mentioned in this video.kzbin.info/www/bejne/iXaclKWjmsymmrM

[@muhmmadnaveed6734]

I can use with must pc1600 series 🤔

[@abdulahfranz2053]

Hallo, How i can Know which mt-50 model is possible to Connect with the epever Xtra 30a.... I wana buy a mt-50 But Here my country are Just thes Models where is writen,. For tracer, e-tracer But nothing written from the Xtra model Like you doing on your Hompage one in the Instruktion? Hope for answer! Thanks,

[@SolarEpic]

Hi, the latest batch of MT-50 supports the connection with the controller you need, if you need, it is suggested to contact our customer service in advance to obtain the latest batch of MT-50.

[@anto1414]

Hi, Is the battery icon on the main screen an accurate representation of battery percentage?

[@SolarEpic]

Hi, the MT50 doesn't represent accurate battery capacity, it's only for a reference. Not accurate.

[@BlackOut0321]

How do you set this up when you have 2 155 amp hr deep cycle dry cell batteries wired in parallel??

[@lioncurlew]

Set to 310 a/hrs

[@attylaracpa]

How to set MT50 for Battleborn Lifepo4 battery?

[@SaabAholic]

Set to “User” is what I was told.

[@djcamper6943]

The mt50 used to work normally, but now the word connecting appears on the screen and does not work. Is there a way to solve it?

[@SolarEpic]

Hi, could you please let me know your email address so I can reach you by email.

[@bridgebex7318]

I have the same problem. Doesn't work with my Tracer AN series.

[@olagunjubose2483]

I have similar issues . CONNECTING appears on the screen. and nothing else

[@onmusicandsound]

I plugged it in, it says Connecting...... but nothing happens, doesn't connect

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@farolilloschilloutvan9023]

Hola tengo un problema. Conecto y la pantalla me pone conecting...

[@SolarEpic]

Hi， please send your question to [e-mail] so that we can understand your question in detail.

[@abdulahfranz2053]

@@SolarEpic exist from this MT50 different types? Or is Just one? I have the epever Xtra herein france some Shops have the MT50 for sell but evrywhere is Just writen for tracer a, e-tracer ect....Know i am Not sure evry If is Same Model and i can youse or there was once an Upgrade for it....because in the epever Homepage in the Produkt list is the mt50 shown with Info die Xtra lifpo4 and so in!! Maybe you can Help pleace...need really to buy this 😁

[@SurendranAlhabariGroup]

Hello, how can I reset the password on MT50. I'd really appreciate your help. I bought 4 used MT50 units, and their passwords have been changed from the factory settings by the previous owner. I followed using option No. 7 "Device Password PSW." When I tried entering the original password "000000" and pressing 'Ok,' I got an "Error Code" and couldn't reset the password. Could you please help me with this? Thanks!

[@wisalahmad1867]

Not necessary wifi module is best epever pair app

[@renonavarro8797]

Backlight only no display

[@rinaldocaterino6543]

Salve mi sa dire perché il mio mt50 non si allinea con mppt triron 3210 mi dice sempre connecting ci sta un modo per allinerlo. La ringrazio anticipatamente