Soldering Iron Hack | Soldering tips

Рет қаралды 174,202

Жыл бұрын

🔰 In this video I'm going to show you Soldering tips
1) Find a high-quality soldering iron
2) Use the correct iron tip shape and size for the task
3) Use the right solder for the task
4) Tin and clean your iron tip
5) Apply heat properly
6) Let a solder joint cool on its own
7) Inspect your solder joints
8) Use proper ventilation / fans / PPE
9) Practice!
If you enjoyed this video, as a support to grow up my KZbin channel, don't forget to subscribe, like, share and comment to my channel
you can also get every upcoming update about my new creations on my social media platforms. so don't forget to like those.
✔️ Subscribe Us on KZbin
/ @easyproject4uofficial
WARNING:
Some ideas and experiment can be dangerous and for that you don't risk and damage you're self
⭕If you like My Channel:
✅Like
✅Share
✅Comment
SUBSCRIBE for more videos Also click on notification 🔔 icon. Thanks for watching...!
#Shorts #hacks #diy #tipsandtricks #tips #howtomake #hacks #hack

Пікірлер: 40

@easyproject4uofficial Жыл бұрын

Single transistor powerfull universal LED tester circuit - kzbin.info/www/bejne/eXW8o6aEjKqcqLc

@cauealves4713 Жыл бұрын

😂😂😂

@TeslaIsCool1150 11 ай бұрын

MUCH SAFER WAY: 1. Heat copper wire for around 1-5 seconds 2. Grab your tin and directly apply to the copper wire 3. After the tin sticks perfectly, stop adding more tin 4. Keep heating the tin for around 2 seconds 5. After 2 seconds, stop heating the copper wire 6. Don't blow! Wait the tin to cool naturally 7. Perfect tin applied!

@houseofpainINKS 7 ай бұрын

If he would have used flux before applying the solder then it would gave worked as it always has . But he didn't even wait fot the iron to heat up correctly and he didn't use flux . All for the sake of showing off his little tiny solder up , you see if he would have spoken and explained like if you have Lotz of wires u need to solder this is a faster way , but to show that wanna be fail . I say wanna be cause he dam well knows he left the flux out intentionally to trick the simple minded and in the process ha a made himself look like a copy Content and a fool

@justinspier3838 2 ай бұрын

@@houseofpainINKSthat's actually not true do better

@Augrills 2 ай бұрын

Or you could learn to solder properly. You’re supposed to heat the copper with the iron and apply the tin to the wire itself

@jesuscarreon4407 2 ай бұрын

Would be fine if the tip was clean

@toxicity6629 5 ай бұрын

I need to send this man a cordless dremel ain’t no way

@ElisaBarzaga-sc2qi Ай бұрын

bien dicho niño, si no sale bien vuelve a hacerlo hasta que funcione, lo importante es la creatividad, la experiencia se obtiene mediante el trabajo y se aprende por repetición. lo único q te crítico o no te sugiero es que lo hagas paso a paso y explicar el material y como hacerlo más despacio, porque tú sabes, pero muchas personas no. felicidades espero y nos enseñes más cosas. gracias

@superkip5920 Жыл бұрын

Als je het goed doet is de normale manier prima!

@easyproject4uofficial Жыл бұрын

Thanks for commenting

@duukn 2 ай бұрын

What a terrible day to be able to see

@DanielMiller-np4or 15 күн бұрын

So now you have one cut and exposed wire covered in solder at the tip. What exactly is that going to accomplish?

@Fahd.Y 3 күн бұрын

Its a demonstration

@CarlWinter-oy8uf Ай бұрын

NO FLUX --Is this real ?

@LilySanWT Жыл бұрын

1. apply solder directly to the part/wire, not the iron. 2. use flux to stop oxidation no need for this silly contraption that puts you in unecessary danger.

@toxicity6629 5 ай бұрын

Bro the tool was meant to put solder into it like those buckets they dip solder parts into I could immediately tell. If you put it on the wire you now have to put both the wire and the solder in just put a lot in to dip your wire. It’s meant for DIPPING

@Augrills 2 ай бұрын

@@toxicity6629 it just don’t seem like the best way of doing a wire. You get perfect coverage, but look how much oxidation is on the tin doing it this way. Coverage isn’t the same as quality. Just do it the right way

@vietphanthanh739 Жыл бұрын

Giỏi quá, quá giỏi, Không làm giỏi hơn nữa.

@easyproject4uofficial Жыл бұрын

Thanks for commenting

@danishkhatri17 21 күн бұрын

Wow

@antekelektronik8788 7 ай бұрын

It didnt work, because this is not the way that you solder. You should hear up the copper wire and apply it near the soldering iron, also, NEVER MODIFY YOUR SOLDERING IRON ON YOUR OWN

@houseofpainINKS 7 ай бұрын

And why not ? Cause I modify a whole lot of sht I own , hell I fixed my very dji mavic zoom after someone crashed it ,it wouldn't take off because of a part in the gimble so I ordered some parts and put it together myself a d it flew I modified a females hair straining iron to use it to press my buds and make my own dabs. And now I'm about to modify my soldering iron for tiny solutions of some big issues I encounted., as long as the person has some common sence then why not buy the majority don't have it

@user-fj3lg3pg5d Ай бұрын

why not modifying it? that's called tinkering buddy

@matveyshev7430 Жыл бұрын

Флюс

@easyproject4uofficial Жыл бұрын

Thanks for commenting

@Mangutkin Жыл бұрын

Покинул чат))

@lightbullet92 8 ай бұрын

Принял ислам

@roseoleal2551 25 күн бұрын

How’d they get a German Shepard?

@chetananam9141 22 күн бұрын

Stupidity. You need to clean the copper wire with a blade first (if it is dirty & dull) till it is shiny. Then twist the strands , dip it in good quality solder flux & then solder it with a good quality solder wire.