Soldering tips and tricks - Tip5 Don't try to solder a wire when flux from solder was evaporated

The tools and accessories we use:
Flux - amzn.to/49Co6Zh
Solder wire - amzn.to/49PZVX5
Solder paste - amzn.to/49PZXhF
Solder wick - amzn.to/3TcDC8p
Solder sucker - amzn.to/49vb2EV
Soldering Station - amzn.to/3P1wWYj
Solder iron tip 1: amzn.to/48u7524
Solder iron tip 2: amzn.to/48z7JeL
Solder iron tip 3: amzn.to/3IhdH9j
Tweezers - amzn.to/42VKY3g and amzn.to/42WYPq5
Extruder - amzn.to/4317OXA

[@shub802]

He wasted to much solder brooo !! Just a little bit of solder is enough and a little flux 😂

[@voltflake]

it's okay, he's not a factory or something...

[@shub802]

@@voltflake wtf do u mean ? U don't know English or what 🤣

[@ElaraArale]

​@@voltflakeexactly

[@alcyrgodhand]

Better safe than sorry...

[@elissaidjer1784]

he is pro with clean and cool work

[@becomematrix]

Do not solder on the wire, let it flow in

[@jorismk1]

Thats one way to do it. Surely not the best way, but the wire is stuck. Well done :)

[@infoaslam]

Thx for again remember that song afte 5 years

[@Fatpumpumlovah2]

R.I.P. circuit board pad. They give thru holes for a reason.

[@memebruh2024]

Why?? I don't know the use of hole at all. Allowing wires to get through and be soldered?

[@Fatpumpumlovah2]

@@memebruh2024 Yessss duhhhhh

[@jimmy3797]

@@memebruh2024yeah, but generally each hole has a purpose, otherwise i think it would just be a pad not a hole

[@bhoot1702]

​​​​​@@memebruh2024 greatest example of common failures are smd components that experience stress physically example smd micro USB charging port. You will see them lift from pcb alot in comparison to hybrid through hole micro USB ports and also those mini HDMI ports that are also smd and don't rely on through hole support. Through hole provides more strength and support than smd does for I/O ports

[@samuelmattio7585]

It's okay... It can be a "vias pad" for more heat dissipation on the joint

[@alphacentauri4155]

i'm alive... love this song 🎤🎵🎵

[@na-pozitiv]

Прям голливудский фильм начала 90-х посмотрел

[@russkorablidinax]

Создание терминатора

[@Big74Mike2012]

Lol Say it ain't so!! You've discovered that flux makes solder flow better!!! You're getting a Nobel Prize!!

[@Eckmuhl29]

Honestly I'm a beginner with soldering, and even more with smd. I heard about flux but I don't what it is why this so useful. Can you explain?

[@contytub]

​@@Eckmuhl29flux does multiple things ... cleans the weld surfaces from oxids and gunk and prevents further corosion when hot during process. Transfers heat better to welding surfaces/welded objects and helps against thermal shock by distributing heat to a bit more surrounding surface. It's corosive tho so it has to be removed clean after weld

[@Eckmuhl29]

@@contytub thanks!

[@JesseCuster]

Some people don't know this. So this video may be useful to them.

[@mariobv947]

​@@Eckmuhl29 I learned soldering when I was about 10. I didn't know the existence of flux other than the inner rosin core of tin wire. I developed a superb technique of soldering and i was creating strong and shiny joints. I certainly had soldering grease, but i just used it for cleaning the iron tip. When I was around 30 and years after an EE degree, i was told to use solder flux, specially for reworking with SMD. I throught that it wouldn't do any difference as my technique was already close to perfect. But once I watched a resin drop hanging from a branch of a pine. I was so intrigued the I dissolved such drop into a little bit of isopropyl Alcohol. Then I applied such mixture to some SMD pads and tried soldering some TSOPs.... Holly Sh*t!!!

[@TruTrust]

Thank you for this video

[@somethingaboutelectronics]

Thank you forfeedback!

[@CodedGamer972]

bro learned soldering for toco bells toilets

[@brake_4_cake]

The other thing you can do is dip the wire in solder paste, I find it easier than using flux and solder separately

[@Kirby7601]

me watching some soldering tips as i listen to I'm alive from stuart little 2

[@somethingaboutelectronics]

😆👍

[@griezboy4809]

I thought I was alone 😅😅😅

[@beatrizfreitas2942]

👏Good job!

[@givanildosilva2041]

Som top 😊 o vídeo top pelo profissionalismo

[@Panda.0038]

Im new to soldiering this helps thanks

[@somethingaboutelectronics]

Thanks for feedback! 😊

[@Panda.0038]

You are welcome

[@rodrigo6516]

Exelente soldadura 😊

[@dickdon2631]

What's this background music？sounds good

[@amroelmughrabi]

Look I understand the importance of the Flux but just buy a better quality solder wire that contains Flux already with good amount and also practice more

[@somethingaboutelectronics]

Yes, you are right. Depends on what materials you have

[@HECKAKYH-ADEKBATEH]

solder wire with flux is NOT better quality, it is type of wire for NOVICE. Pro solder has NO flux!!

[@adarshdjbasai3500]

Can you tell which flux you use and which company

[@antekelektronik8788]

Always use a shitton of flux and also apply the solder to the wire in advance (with also a lot of flux)

[@HECKAKYH-ADEKBATEH]

flux costs nothing. Colophonium - $5 per Kilo, isopropyl - $10 per Liter. For $15 you have Kilo of flux.. :)

[@CooLDEaFY4204Me]

Awesome. I subscribed cuz you make me leaen something better way to solder

[@DIYMachineYT]

Good idea for beginners

[@evansgate]

Thanks YT for removing the dislike counter... I copied him exactly. Just kidding even I knew it was bad and I've never soldered

[@muppetpaster]

😂😂😂 Golden tip.....gee wizzz , who would have known ....

[@commentfailedtopost]

Came for the music.

[@eladioalonso8906]

Buena canción, hace años no la escuchaba

[@AntzChannel02]

Woooww perfect❤❤

[@nickysnrrobjin9108]

What type gel or Flux is it you use with the lead soldering?

[@somethingaboutelectronics]

Flux SMD491 from CHIPQUIK

[@rudydaberry122]

Everytime I solder is just drips off the wire and doesn’t even coat the wire

[@Mr.Electronics9898]

I like video your❤❤

[@gabbar9358]

Slowly slowly aluminium is taking place of copper

[@andrebello4191]

Its either cheaper. Or it conducts more for its mass. Even though copper conducts more for cross section area. Maybe. Something like that. Or maybe aluminum is just more plentiful and easier to find or can be easier to obtain by recycling or something like that. Mass is especially important in hydro transmission lines and also in vehicles. Maybe aluminum also has better strength and corrosion resistance.

[@gabbar9358]

​@@andrebello4191it can't take the place of copper, peoples have been using copper from many decades and nothing happens till now but aluminium products doesn't last for more than 5 years

[@HECKAKYH-ADEKBATEH]

well spotted. it is huge problem. Aluminum is much worse in conductivity, it doesn't solder well too - and it destroys copper in direct contact due to different internal metal resistance.

[@user-bz1mh1pu8s]

Вау припаять провод к плате нужно снять видос.

[@user-bq5ch6kd7s]

Это тебе не Россия, где люди умеют работать руками и головой...

[@HECKAKYH-ADEKBATEH]

все рождаются де-билами, просто в России люди умнеют быстрее.

[@Jeff-tu8le]

HE CAME ON THE BOARD

[@vocemaisligado1337]

❤

[@KMAAGARIGAMER]

Hello sir ye soldering pest (Flux) kounsa he

[@enlinea777]

Alguien se dió cuenta que el ollo de la batería estaba bien marcado y no se utilizó 😮

[@mahootina52]

Never use a soldering iron to carry solder!!!

[@somethingaboutelectronics]

Yes, of course. This is what I shown. When you put solder on iron tip, all flux will be evaporated and you will not be able to solder it and I marked this part of the video with a big red X which means it is wrong.

[@Ben1551]

You did the same thing straight after though

[@HECKAKYH-ADEKBATEH]

if your soldering iron tip is pure CRAP, you can't do it. But if you KNOW how to keep it proper - it is possible and good!

[@mahootina52]

Condition of the tip has nothing to do with it, prolonging heat applied to solder causes it to start to crystallise which causes a substandard joint. And it doesn't take too long for it to start happening.

[@HECKAKYH-ADEKBATEH]

@@mahootina52 it has everything to do with tip. Solder does not crystalize and doesn't go bad - what you mean is that it oxidates. Thats what flux is for, it defeats oxidation. You can heat any metal to its melting point, it won't go bad. Flux should not be exposed to heat for a long time, as it evaporates and burns. Didn't I say that its a problem of NOVICE solder with flux core? You heat it up and it burns flux - and because you don't pre-flux, joints get too low flux and get brittle. Don't use flux core and use pure core with dedicated pre-fluxing. Or just add dedicated pre-fluxing to flux-core.

[@TDIMAXDIESEL]

Céline Dion sung music! 🙂🇨🇦

[@firefox8782]

Есть ещё вариант разделить многожильный провод на пучки по количеству отверстий и запоять

[@DrunkDron]

звучит геморно:\

[@HECKAKYH-ADEKBATEH]

для чего???

[@huck_vier]

Make them joinable before join them

[@ch3rry833]

Next time expose less wire! Still you did a good job

[@Talaxiong]

Perfect

[@dheofugado2117]

How many watts should i be using

[@imposterwala9896]

You can use moisturizing cream as Flux 😎

[@darwud]

Can you put the name of the flux you are using?

[@HoangLe-zu4uv]

That is pine resin?

[@johnjames8594]

lovely

[@santhalivillageofficiel1882]

Flux name please

[@Freeman666Gordon]

Untwist wire and split to 6 packs: ❌ Solder it to holes like to SMT pad: ✔️

[@somethingaboutelectronics]

Read the description of video

[@adama1294]

Inspection of the joint is impossible since too much solder was used. You need to see the fillet otherwise the blob might hide a cold solder joint.

[@user-jm1ts6yq6s]

ดีครับชอบครับ

[@BalakutakMotivation]

Nice

[@saeqe_ramin]

👏👏👏👍

[@Sherifone78]

Flux and Solder wire name?

[@juanbermudez964]

I been doing repairs and modifications for all kids of computers and video game consoles, and never ones I have to do anything similar do this! For what aplicación you think is a need to solder a large conductor to a bunch of through holes, like a say I do this for a living for the last 20 years, and never have to do anything like that!

[@nicelittleboy]

What's the white one you used, please?

[@somethingaboutelectronics]

Flux SMD491

[@hrithvajpraveen]

👍🏻👍🏻😄😄

[@kikissolano5645]

good soldering clip but omg the music was unbearable IMO

[@FantaBH]

just use high quality soldering wire and you will learn amassing thing , one of it is you going rarely to need soldering flux.

[@sonju.sonju.2345]

What is name? Thats liquid pest???

[@Warrior-Raz]

Says don't and then proceed to solder a wire hahah😅😂

[@learnartandcraftwithus]

What is that gel

[@somethingaboutelectronics]

Flux smd491

[@jugaad1]

Chemical name please what

[@amroelmughrabi]

Flux

[@jugaad1]

@@amroelmughrabi kaha sa mali ga

[@mdjahidhossain6622]

Mashallah Good Work 🎉❤

[@seangraves5981]

Too much solder on that the flux is to help the solder flow and adding more solder makes it bubble up and clump like you see here. The solder needs to flow down towards the pad. Too much solder bubbles and clumped up wouldn't pass ocia standards

[@HECKAKYH-ADEKBATEH]

A ton of morons in comments. This solder is CORRECT. This wire isn't copper, but aluminium, it does not solder well too, it does not soak solder well, it needs ton of flux to catch solder and of course, it does NOT go through the holes. And using MORE flux is CORRECT - better contact, MORE solder is also CORRECT - larger contact area from cable to board - less contact resistance, less heating.

[@thehardesttry]

Lmao what is with all the solder

[@PhastorDragon]

For when you need to solder a wire that's way too big for a job and bridge six vias, which will be never.

[@AkElectronicwork]

Parfect soldering skills

[@Zoxmby]

El truco es usar flux. Sino parecerá que estás soldando con mercurio.

[@eugeneastakhov250]

На плавить на провод остальную часть катушки? НЕТ!!! Набросать с верху "соплей"? ДА!!!

[@be_real_n_Original]

Overkill use of solder wire

[@scrummyvision]

why commect to 6 pads?

[@somethingaboutelectronics]

for more resistance

[@gt_anu]

Kaun sa paste use kr rhe h

[@somethingaboutelectronics]

Flux SMD491

[@CM-xr9oq]

Any flux will work better than no flux. I've actually stopped using the stuff in the syringe because it goes bad before i use it all.

[@wazileiyjh]

my flux cant do this 😞

[@jaroslavjesensky6360]

Zlatý časy když šlo použít pajku a udělat všechno a kalafinu použít jenom aby dyl vydržel hrot aby nepraskál často přehříváním 😉

[@mohremohre1117]

You don’t need to remove that much isolation , try a bit less maybe next time

[@akilalakshan6079]

What is use?

[@olamosa2262]

what is this liquid?

[@somethingaboutelectronics]

Flux SMD491

[@AptivaXP]

That's a lot of flux and solder involved here...

[@wesmcdaniel8686]

Excessive solder! Looks like someone doesn’t have the j-std-001 cert 😂

[@guinaldo29]

Com certeza esse não sabe trabalhar com solda eletrônica. Os dois métodos usados estão incorretos. afinal o próprio fio de estanho já possui o fluxo necessário para a soldagem.

[@user-ho5jr3gv2t]

song name please 🙏🙏🙏

[@johnnywelder4244]

А сварочный кабель слабо припааять так же?

[@Haters.GonnaHate]

Вот это дааа😮 Еще бы жало тебе нормальное на паяло😅

[@krzychol83]

👀😉

[@albeza_electronics]

Dostum peki neden taşıma lehim yapıyorsun?

[@user-bl4em1fz4l]

мудрий чоловік))) паяє припоєм з флюсом і додає флюс))))

[@zoranpaunovic4336]

I bet you don't know how to solder it without flux!

[@G5Hohn]

Way too much solder, but whatever works.

[@CM-xr9oq]

All wrong on the first attempt. Trying to solder to vias?. Didnt tin the wire. Didn't apply ANY flux to the base metal. Didn't add flux-core solder to the hot area.

[@ottonormalverbrauch3794]

No wonder you need flux if you use solder wire like this.

[@user-ko9pu7ei4h]

Не повторяйте действия этого инвалида!

[@HECKAKYH-ADEKBATEH]

он всё верно сделал.

[@tkrtech6373]

Super sir paste name

[@somethingaboutelectronics]

Flux SMD491

[@SweetJohnson-RIP]

Bro what that solud

[@neket_]

капитан очевидность

[@TEKTONby]

Что за флюс ?

[@Mukul_Adhikary]

All the Soldering wire will be gone in one day 🥴🥴

[@rahmanaira8621]

masih salah jugak cara nya bos.tapi boleh lah tuk pemul

[@endorx]

😂Die Musik dazu