Soldering Simple Joints | Band Director Basics in Repair

Hey everybody, sorry for such a long break. I'm back and kicking things off with a new series on the basic repairs that you should know how to complete as a band director. These can save your program and students time and money. Comment if you have any questions.
If you have a project in mind, and need a tech to build it for you, please reach out at the links below.
Facebook: / ezekielstrumpetcreations
Email: [e-mail]

[@ledgonius910]

By the way, thank you for fixing it, it’s also really interesting to see the process and all of the hard work that goes into repairing an instrument and the level of skill required, thank you. 👍🏻

[@josephstrange4406]

Great video, thank you. This should help me fix my sons trumpet

[@davidpaul286]

Like you said, no reason to use those wet rags. If anything it makes it more likely to burn because you're focusing more heat in a small area. Keep the torch moving and back it off once it gets hot enough for the solder to flow.

[@Tuca-Luthier.]

Good afternoon friend, could you give me a tip on soldering flux which is the best type to solder an instrument?

[@aaronlol4569]

First to like and comment Edit: hope ur doing good this is william

[@habibahayat7539]

Great video

[@ansumantmg76]

Wow nice

[@Gator1699]

Dude get a Lazy Susan and a bone stand short one glue it to the Susy and you can spin the bone around and use the Bernzomatic more heat and quicker. Mobile Woodwind Service Aus. 🐊

[@amirulislamtamim3290]

Awesome 😎

[@farmankhan6283]

Nice

[@annettetorres1568]

Can you please help! What is that you have in the vice that’s holding the brass pipe to solder???

[@gyanibaba8256]

It's osm

[@snrnsjd]

What kind of solder is that? 60/40?

[@matthewsaxman1028]

What kind of solder do you use?

[@alivlogz1]

Nivve

[@ralphcharlethtimbang3454]

Can i ask the diameter of a single trombone inner and outer slide? Many tnx

[@ezekielstrumpetcreations]

Are you talking about the bore size of slide? Many models use a .500 bore size for the inner diameter. The whole bell section tapers toward the bell flare, so there are many different sizes between those two points.

[@gingershorybena]

Trabajo de aprendiz

[@riponislam1048]

Great video

[@GamerDad1987]

What kind of solder do you use?