T12-BC1 tip is what I used as well. It’s really good!!!
@minecraftgman6942011 ай бұрын
amazing video! gonna download this incase it gets taken down again! keep up the good work!
@sthetixofficial11 ай бұрын
Much appreciated!
@boibudgetmeal26 күн бұрын
That is a mad microsoldering skills. you made it look easy! That is insane! Susbsribed!
@foxlance11 ай бұрын
My man, the gift that keeps on giving!
@grant53572 ай бұрын
Where can i find that ribbon cable for the lite? Cant seem to find it anywhere Love the vids cheers
@sthetixofficial2 ай бұрын
you can find it on ali
@monokrome11 ай бұрын
Hi! Thanks for the content. I was on your store an wondering if you would be able to do the Dialga and Palkia edition?
@sthetixofficial11 ай бұрын
It is out of stock BUT you can do the same mod for the Dialga Palkia
@TruSuCiO2311 ай бұрын
Looks like the ninjas were at it again! Great video otherwise, here giving it its view from the previous one!
@sthetixofficial11 ай бұрын
Thanks for the visit
@TruSuCiO2311 ай бұрын
The mod kit and fpc kits are nowhere to be found 😢. Any recommendations or if they will be in stock again?
@jayjayhooksch15 ай бұрын
I got a v6 pico chip that looks like this v6 instinct chip (cable goes over the ram, under the cpu shield and bends over to install). Should work the same right? Flash chip, solder components, install chip, cut shield, reassemble, install sd card with cfw? Thanks for the videos and work you do they have been very helpful so far.
@sthetixofficial5 ай бұрын
yes they are the same
@j.carlosrodriguez603013 күн бұрын
there it's some reason to cut the main metal shield? I never cut it, and never put kapton on chip, my console is working fine for a year
@sthetixofficial13 күн бұрын
it depends on your thoughts. my thoughts say the chip is pressing the cpu shield when the metal shield is not cut. when you say nothing happens doesn't mean it is safe. you can think logically
@j.carlosrodriguez603013 күн бұрын
@@sthetixofficial ok I check that, thanks!
@fisrtrepair11 ай бұрын
🔝
@george27819 ай бұрын
Hello sthetix I would like to install this mod kit on my lite, however I have absolutely no experience in soldering as a whole, let alone micro-soldering. Before I start doing anything to consoles I would first like to practice and learn soldering and micro-soldering, is there anything in particular that you recommend for this type of thing? Many thanks.
@sthetixofficial9 ай бұрын
You'll need to practice soldering for small repairs before installing the modchip. For example, repair the Xbox or the PS3 analog stick. You will be confident later.
@george27819 ай бұрын
@@sthetixofficialI'll be sure to give those a try, thanks for the suggestion!
@loganchapman22365 ай бұрын
I have no power to chip and system after installing the ribbon cables. Any idea as to what could be happening? It boots up normally if the chip is disconnected.
@sthetixofficial5 ай бұрын
maybe the ribbon cables is damaged? please check the soldering points for short.
@Chocolatething9 ай бұрын
My Switch Lite shows the Instinct NX screen but it is unable to go through the OFW. Whenever I try I always get a blue screen. I also get a black screen while I try to boot the console with the sdcard inside.
@sthetixofficial9 ай бұрын
Try to repair the nand withthe level1 guide.
@itzSamito11 ай бұрын
well done :)
@Zpheme122 ай бұрын
what type of soldering tip did you use at 5:15 to solder the cpu capacitors
@sthetixofficial2 ай бұрын
it is t12 bc1 tip
@thearchitecht212228 күн бұрын
Bro, did you watch the video on mute? they even stated which tip they are using
@nekuuu7 ай бұрын
Mr Sthetix, I installed a modchip following this tutorial and everything worked until the last step.. I extract the HATS pack into microSD card but when I put it back in the switch, it either fails to boot (modchip glows purple then green then shuts off with nothing displaying) or displays a message saying failed to boot init. Do you know anything about this? I tried formatting my microSD, I did this via Macbook, idk if that's an issue, any help would be appreciated.
@sthetixofficial7 ай бұрын
try using other sd card brands.
@OverLord-OvLd11 ай бұрын
What would you more recommend, the new v6 Instinct NX or Picofly?
@sthetixofficial11 ай бұрын
v6
@fatpandapop722111 ай бұрын
Is it the same process for picofly?
@nick_2k6 ай бұрын
how come the soldering iron doesnt damage the cable? sorry for the stupid question, i am a noob when it comes to soldering
@sthetixofficial6 ай бұрын
because it is heat proof.
@christopherfuentes808111 ай бұрын
Hi, I accidentally updated my switch to the latest firmware and now when I boot my switch the screen stays black, my emunand is working fine with the latest ams and hekate but sysnand is not!
@sthetixofficial11 ай бұрын
try using my latest hats pack, 1.6.2, run sysmmc, it should work.
@acenewgen26236 ай бұрын
@sthetix I completed the mod and it boot fine into OFW and Hekate. However, when I tried to back up EMMC the unit would froze and locked up. Any pointer on what to do next? thank you.
@sthetixofficial6 ай бұрын
try to replace the sdcard
@acenewgen26236 ай бұрын
@@sthetixofficial I got it fixed. I found one loose connection on the flex cable connector and maybe the cut off part on the heat shield is touching the usb port that might cause a short. Everything were corrected and now working like it should.
@troycrees739110 ай бұрын
What about the sp caps anchor gnd points 😮
@sthetixofficial10 ай бұрын
we dont need it, as it is included on the sp caps.
@Taco18711 ай бұрын
Where can I get the kit ? I tried looking for it but all I can find is the v1,v2 and v3
@sthetixofficial11 ай бұрын
you can dm me on X or twitter
@hussainjassim438611 ай бұрын
Can follow the same instructions for consoles v1 patched abd v2 ?
@sthetixofficial11 ай бұрын
the concept is still the same.
@ChicagoMel234 ай бұрын
Why hide the battery info? And the switch logo?
@CropDudia480pАй бұрын
ninjas
@jejak-penjajah_barat2 ай бұрын
Untuk nyolder dat0 hanya di versi oled ya gan?
@sthetixofficialАй бұрын
iya
@jejak-penjajah_baratАй бұрын
@@sthetixofficial satu lagi gan, kenapa harus memilih methode kamikaze daripada menggunakan dat0 adapter?
@GraphicAxe6 ай бұрын
is the process for the v6s on switch lite similar to this?
@sthetixofficial6 ай бұрын
yes it is the same.
@Jacobtgoat11 ай бұрын
Can you make a tutorial of modding new nintendo 3ds systems?
@sthetixofficial11 ай бұрын
it is there in my channel
@Jacobtgoat11 ай бұрын
Thank you sir
@falconmick11 ай бұрын
Did you miss a logo in the original upload?
@sthetixofficial11 ай бұрын
the logo is exposed in the original upload.
@JoachimPrestes10 ай бұрын
Your discord invite link doesn’t work anymore on your about page
@sthetixofficial10 ай бұрын
you can contact me directly.
@TheClariceyNad11 ай бұрын
Yoooooooo 🕺🕺🕺🕺🕺
@AlfarooqAlmenghawi11 ай бұрын
🎉
@Agz282811 ай бұрын
My switch never boots to hekate anymore after updating to 17! It only blinks Purple for a bit Then WHITE! Then straight to OFW Heelp! 😢😢😢
@sthetixofficial11 ай бұрын
there is something wrong with the installation.
@Agz282811 ай бұрын
oh. okay. that happened to me before .. i just waited then its fixed again. Then this happend again. 😭
@jonathana.180211 ай бұрын
I can't find any V6 any source/links?
@sthetixofficial11 ай бұрын
it is on ali.
@saulkkk9 ай бұрын
Hi, i need Contact to you, i have some problem with my nintendo switch lite after updating the instint v6 mod
@sthetixofficial9 ай бұрын
Yes?
@Veryrarebois3 ай бұрын
Hello after soldering I got blinking pattern 🔵…🟡🟡…🟡🟡…🟡🟡 what could be the issue pls