Solenoid BMW E46 n42 reinigen / CLEAN VANOS SOLENOID / MAGNETVENTIL REINIGEN

[@krh007]

You need to connect them to a 12v supply to test them whilst out of the car to make sure the soleloid is activating the moving valve freely and also whist activated & open to further clean inside with carby cleaner of MAF cleaner to get all the crud out of the inside. Also need to activate whilst applying fresh oil so it gets inside and then test the solenoid with rapid on-off 12v supply to make sure the valve is now moving freely & with ease (you can tell by the clicking sound that the valve is super responsive to 12v being switched & off). This is the proper way to clean & test the solenoid out before re-installing (replace o-rings if they are no longer soft & pliable)

[@e46shop12]

see my videos ,,,

[@RafaelQuizonvlog]

Bedank meneer

[@gudmundurjonasson1334]

a very good video, thanks

[@robster6868]

Surely you replace solenoid o ring’s ?

[@WayToManyAssassins]

I have a Rough idle after doing this? Any ideas? Everything is seated right

[@H-var]

Hi! I have "Output inlet-VANOS" error - do you think cleaning solenoids might fix it, or is this a completely different issue? Where should I look? Thank you!

[@e46shop12]

cleaning can help ,,,, Vanos can also be the problem,,,,

[@H-var]

@@e46shop12 I will replace the sensors, and clean solenoids, and I will reply to this comment to let you know, if it fix this error

[@e46shop12]

@@H-var you can test them also , see other video E46 SHOP

[@H-var]

I didn't replace anything - I only cleaned both sensors and solenoids and the "Output inlet-VANOS error has disappeared!

[@patrickluyt9724]

Maakt het nog uit welke solenoïd je in welk gat stopt?

[@e46shop12]

hallo, zijn het zelfde , echter houd ik ze wel altijd uit elkaar welke waar zat ,, groet , voor meer videos kijk hier. ; kzbin.info/door/dbm4z83tFvKcStjTD48SAA

[@yappk-h8s]

😊good video

[@FH24Bert]

Hallo, bij mijn E46 werkt de solenoid van de uitlaat niet naar behoren en moet deze worden vervangen. Welke van de twee is dit?

[@e46shop12]

die zit aan de kant waar je uitlaat aan de motor zit dmv uitlaat spruitstuk ,, als je met gezicht naar de auto staat links dus

[@kerrryc]

Do I need to release all the engine oil down the car before I take out and clean the vanos? Thanks

[@e46shop12]

no 👍

[@hiiamyu]

Hi there, do I have to do any Vanos adaptations via inpas?

[@e46shop12]

no sorry ,

[@H-var]

When I decided to clean solenoids, I noticed that one of them was completely disconnected (not connected properly by the previous owner). What does that mean for the car? One solenoid was disconnected probably for years before I bought the car and noticed it. How did it influence the engine? Could you please tell what one disconnected solenoid would do to the engine? Thank you!

[@e46shop12]

vanos problems

[@ramy317317]

Is deze voor diesel motors

[@e46shop12]

dit is een benzine n42 motor

[@БМВклабминусдвацилиндра]

Здравствуйте! А обязательно смазывать соленоиды маслом, после промывки, перед установкой?

[@e46shop12]

yes oil !!!

[@БМВклабминусдвацилиндра]

@@e46shop12 спасибо

[@LeonardoCostaUSA]

There are pig mechanics every where in the world even in Germany. Some one put glue on the o-rings and that's awful !! You din't clean it properly you should connect to a 12v to test them and open it to clean inside and you are reassembling with the old o-rings??! Man why are you posting your video?