Solid vs. Engineered Hardwood Floors. What's the Difference?

[@proofdude]

Well done Jordan. Watched this Oct. 2024. Just had our 1st house built at age 75 and we didn't know squat about flooring. Actually we doesn't know anything about building. Long story short we had Shaw LVP put on a slab and now Shaw has pulled this style because of unknown reasons and flaws. It's all buckled up and seam cracking. It's Luxury Junk. We came from a home with basement and solid red oak flooring installed in 1956. Refinished 10 years ago and looked great. Your video has helped me decide to get some real flooring and have it done right. Expensive but right. THANK YOU.

[@lorrilewis2178]

I've watched tons of solid vs. engineered wood flooring videos. Yours is the most comprehensive by far!

[@marchetta67]

Your ability to explain things in a way even a novice can understand is exceptional. Of all the home building KZbinrs I subscribe to, you are the most informative. It's almost like taking a class... we should just call you Professor Smith. Keep up the great work.

[@schappiness]

Totally agreed!

[@stephaniebrough7931]

Agreed

[@Innessofficial]

This is the best alternative to hardwood flooring for humid environments! We r building a house and I think we'll go with a tile in kitchen,bathrooms,and laundry room and engineered wood everywhere else. Thank you for such a detailed explanation!))

[@amiramark]

A+ on your presentation and knowledge of wood flooring. I like the fact you talk about inferior products and premium products without putting either product down. I have been wondering all your points and am glad you put out a first class training session.

[@michael-4k4000]

Floors are always on the ground......

[@EkoostikFrog]

Great info coming from an installer. Pretty much the same way I explain the differences in the structural parts. Although calling the veneer the "wearlayer" makes me cringe. Adding more info about finish qualities which reflect the warranty of the finish, which affects costs would help some people. Also reminding people that if their floor is textured, wire brushed, hand scraped, the veneer can only be sanded flat and usually can't be made as pretty as it came out of the factory. Yeah there are special people that can scrape the floor and make it pretty. But the to Rip it out and put new in with a factory finish would be cheaper. So the veneer thickness is kinda redundant and not important for some floors, because they will just be ripped out and something new will be put in. It's our "disposable society". You explained plywood with a veneer very well. The Bona product you discussed uses "staves" instead of plywood, which was pioneered by Lauzon. Also used by Mannington and many or manufacturers. Another peice of info to discuss. Again, very well explained overall!😀

[@anythingtech5711]

all the way Engineered, now I understand the differences between both, pros and cons, precise and concise explanation!

[@migueldominguez7162]

hi, great info. but what about the materials used to glue the flooring ? is it toxic to breath?

[@CynthiaB08]

The engineered floor I was shown was made of a sawdust base. I could not sand it and it was thin, like 1/4 thin. It looked like it was a laminate-type flooring. The company said no it was called an engineered flooring. If I was shown something that you just shared I totally would go for that type. Thanks for the info! It has been very helpful.

[@wildsaddle6000]

Very nice presentation and especially the explanation on the wear layers it was very informative, simply great. Thanks!

[@bamascubaman]

Having only been exposed to the cheap box store stuff, I definitely haven't been too keen on the idea of engineered flooring. You've definitely opened my eyes on this. I'll definitely be considering them in the future.

[@citygurl0105]

I get samples from the store and scratch the mess out of them with my keys 😁

[@michael-4k4000]

BRUCE hardwood floors are amazing

[@shipuden978]

Awesome video, extremely helpful for me. Just started working at a flooring store with no prior knowledge nor experience so these vids help out a ton

[@edeppel6710]

We have 3/4" oak in high traffic areas but used engineered cork in one bedroom and engineered bamboo in another (high quality, not builder grade). Our bamboo also looks just like new but a lot of that has to do with the quality of the finish. The cork has held up very well also and feels nice under foot. For bedrooms these are typically floating installations with click and lock boards, so no nailing required and no creaks in the floor down the road due to nails working loose. The floor wearing out after 7 years has to do with the quality of finish and the type of traffic. You can get poor quality finishes on solid wood flooring as well. My oak needs refinishing, but it's in a high traffic area where furniture also gets moved around, so that's normal. Dogs will also wear out the floor faster. 3 coat poly will not last long, but 5 or 7 coat poly will last many years, so do your research before purchasing. If working with a builder, consider upgrading to higher quality finishes for longer wear.

[@jl9678]

Jordan, your spec house was instrumental in my decision to go with a helical pile foundation with open crawlspace. Can you kindly share how you insulated the open crawl space? Thanks

[@travisburch4342]

What is superior about plywood (either underlaid, or as part of the engineered) that allows it to tolerate moisture from a slab?

[@dorhocyn3]

Every time I hear that intro music I pause my TV and go off looking for leg warmers that I used to have in the 80s. Then I realize I never had legwarmers, forget what I was doing, and realize that my A.D.D. is flaring up.

[@StacyMadden-t3b]

That was the best informational video on wood floor options! Thank you.

[@JordanSmithBuilds]

Glad it was helpful!

[@ScottyDMcom]

*Fuming Oak:* The "smoke" is ammonia, which chemically reacts with the tannins in oak and darkens the wood.

[@cdboniface]

I was waiting to see if somebody else knew what "fumed" really was

[@victorvek5227]

I don’t care what reviews come along with it - if you’re paying $18/sqft for a 5mm engineered hardwood before install or without an install system - you’re paying WAY too much.

[@Hgdhgfdssxvbbnjoo]

Do you know how expensive walnut is?

[@sfasr32t432tfg43etfg]

I put in bamboo five years ago and love it, it looks as good as when we installed it, super durable. We foster large dogs so I was not expecting it to still look like when it was installed five years later.

[@MrExitboon]

Do you know who manufactured the bamboo?

[@Phil_Melone]

Can I put bamboo on top of concrete flooring?

[@paschalayomideokanlawon4770]

⁠@@Phil_Meloneyes

[@hagar2167]

We had engineered hard wood floor put in and I really liked it. Now finding someone to resurface it is very hard. They all seem to say you can't. This video was very helpful/ Good job and thanks. I won't let someone talk down about my hard wood floor.

[@KJSvitko]

Moisture is always a problem everywhere. A lot of thought needs to go into any home build to keep the floors, walls and roof dry. Too many builders use poor construction techniques. Proper landscaping drainage is often over looked.

[@ilovesteveclark6084]

Do solid. It can be professionally covered with polyurethane or lacquer. I'm from New Orleans. Our floors were 50 years old. First, we had to get them professionally sanded, then stained. After they were coated with polyurethane, they stayed beautiful and looked brand new through 2 active toddlers, a boxer puppy, and toys being played with on the floors, etc....To clean, the professional told me to use a damp string mop, taking as much of the dampness out that I could. It cleaned wonderfully.

[@travisburch4342]

This has worked for you on a slab?

[@mattv5281]

A large national discount flooring chain sells engineered hardwood with a paper thin wear layer. I doubt you could even refinish it once. I went with solid wood (from the same chain), and it was somewhat of a mistake. The milling was flawed (boards vary in width by 1/16" or more, excessive snipe on the tongue side of a large number of boards), and it took 10x longer than it should have to piece together a floor without gaps. Since it's prefinished I couldn't just fix problem boards with my woodworking tools. Next time I'd go with quality engineered hardwood. The labor savings alone will be worth it even if it costs more.

[@robertlane5023]

Very nice explanation of the flooring differences. I have been in the home improvement business for a while and I am some times confused by all the different types and styles of wood products out there ! Thank you ! Bob Lane, Sterling Heights, MI

[@freedomofreligion3248]

THIS completely clears this up for me, thank you very much! One video, bingo, the right one.

[@CB-oc7nr]

I have been driving myself crazy trying to find something that mimics a white oak solid hardwood flooring... it’s hard to find without it looking cheap. This flooring looks beautiful and you explained it so nicely! Thank you!

[@fredsalfa]

Thanks for that you clarified and and cleared up a lot about the differences between the two.

[@xoxo2008oxox]

I always loved installing solid wood flooring. I found a mill in nearby state that sold old reclaimed wood flooring, as well as clear or "rustic" aka knots. I learned to install floors, and did my own (but not the finishing). With your video, you cleared up the notion that "engineered" is not only sandable, but you can get 2x the refinish out of them as much as solid flooring. (ofcourse the pre-finished, cheaper flooring is the one I saw the most, so I never knew there was a solid wood laminate over engineered. Thank you. Something now to consider now. What is the end resource of engineered when its done? Solid wood floors can be milled or recycled- what about engineered?

[@kenvng]

To my knowledge engineered is basically made out of wood too but instead of a solid piece it is being layered with cheap woods/plywood (spelling) under and so on.

[@superbee7115]

The only video that really helps understand hardwood floors thanks I learned all I need

[@shakejones]

great video+explanation+presentation mate! well done! thanks for sharing! new sub 🙏🏻

[@ArthurDentZaphodBeeb]

Can you get engineered sand-in-place floors? I hate seeing grooves ('eased edges') in floors - screams engineered flooring and collects dust/dirt.

[@JB-ex8kl]

Yes,! You’re right- dirt collectors! And yes, sand and finish in place engineered is a great way to go!!

[@DWESENTERPRISE]

Thank you for the video! I'm starting to clean hardwood floors and this was very informative... What really got me into hardwood types is I contracted out a hardwood sand and refinish job and I want to learn more about the floors! You definitely helped out. Appreciate you!

[@beebester4106]

There has to be some worry of delamination between the solid wood and the plywood on the engineered flooring. Why was this not brought up, is just never an issue?

[@svbakulin]

thanks, very good explanation of advantages of engineered timber. one'd think that solid is always better, but it is not the case here.

[@shahsmerdis]

Questions . What do you think of retrofit addition of insulation on a slab on grade foundation ? Say 1 inch of foam plus plywood plus engineered floor ? I was even thinking of a dimple Mat later too let the slab breath. Thoughts ?

[@elizab1028]

What about concerns over the out-gassing of the adhesives used in the engineered hardwood? Also, what happens if the plywood underside ever gets wet? I have seen what happens to plywood when it gets wet-not good!

[@MOAB-UT]

yes

[@KATHYFARRELL]

Who cares about flooring, when we have such a good looking man to watch!

[@michael-4k4000]

Hes married Kathy, keep your mind out of the gutter. Keep them legs closed, adultery is NO good. am I right?

[@eugenepark]

Ewww lust sinner

[@martinesavard1246]

Very, very informative! I will get engineered hardwood floor!

[@whoisradu]

Thank you so much! Never knew you could sand engineer flooring.

[@bobbray9666]

Here is zone 6, most new higher end homes use 3/4" solid hardwood for 1st and 2nd story floors and luxury vinyl for basements over concrete. The cost difference between solid and engineered hardwood isn't worth the limited times engineered could sanded for refinishing. It also isn't worth the extra cost to install engineered wood over concrete if a floating subfloor is required. If you want flush wood floor register vents, they all seem to be 3/4" thick, so good luck if installing 5/8" thick engineered hardwood or install 1/8" thick underlayment first, which drives up the cost.

[@mickael486]

I'm a little confused about the Fuming process. How does this allow us to "not worry about the finish chipping"? Thanks.

[@triumphrider9396]

Excellent explanation! Thanks for the video. I decided on Bella Cera engineered hardwood. Got the Villa Belize in Butera which is French Oak, 7.5" wide planks. I'm installing it now. I really dig the smoked look and they have 8 coats of Bona matte finish that really makes the grain pop. Only a 2mm wear layer, but I have no plans on refinishing. If the times comes for a change, I'll just replace it.

[@Festus2022]

what was that term you used for the wood with the natural nonshine look? ?? Bon al Natural???

[@jonathanmonroi]

It is not a term, it is an actual product. The brand is called BONA - and has an extensive range of products, the one that he is refering to is Bona Natural. - check out their website. Greetings from Australia! www.bona.com/Bona-Professional/Products/Coatings/Lacquers/Bona-Traffic-Natural/

[@shnuggumz]

@@jonathanmonroi thanks for sharing the name and link. I came to the comments on hopes of finding this! 💕

[@kilozap]

Thanks for this really detailed description! I am doing an attic remodel and the details matter! In the case we're looking at the downstairs is already a manufactured parquet hardwood tile, possibly trying to match it, but this give us choices to work with - cheers!

[@petecartwright9521]

Very interesting video. I would like to do the engineered flooring in my basement. Would you tell me what is required between this and the concrete slab?

[@goonies_never_say_die]

We have engineered hardwood flooring from Armstrong in our home and it is absolute garbage. It scratches, it delaminates and splinters. It's so bad that I don't see how or why we would ever consider engineered wood flooring in the future. I guess Armstrong has ruined the product for us.

[@Phil_Melone]

What would you do if you had it over to do? I ask because I'm looking into hardwood floors and didn't even know how many different types they had!

[@tombeegeeeye5765]

Thanks I always wondered about the sanding issue.

[@nataliesnyder695]

Do you recommend Hurst Hardwoods? I think I saw in another video that you’ve gotten flooring from them before. I’m considering using them for my new build.

[@leek9910]

Can you install engineered hardwood floor in my bedroom? I live in Pennsylvania. In the winter my heater would be on a lot and the air is very dry.

[@dimitriw887]

What flooring store are you doing this video from?

[@Innessofficial]

Can u recommend engineered floors above water piped floor heating installation system?

[@ocean374]

Can engineered be nailed and also is it waterproof I was thinking to use it in a kitchen if yes can I put cabinets on top of this style of flooring or it has to be around cabinets thanks

[@kaydiangel2445]

Thak you so much for your wisdom on wood flooring. I truly appreciate this video. 😊subbed

[@sophieknobloch2806]

Where can I get the wood planks that are shown on the wall? Those are beautiful.

[@Rose-re9tn]

How are spelling the name of the wood floors in you store? boen wood floors?

[@Kyle_almighty1]

Great video! I know nothing about floors but you made it easy to follow along👍

[@marianneunger7069]

I have concrete floor since our house is built on a slab. I want to put a dance floor in one of the rooms. It cannot be vinyl because our feet will hurt if we are dancing on concrete. This room I do not keep the temp of the rest of the house to save money. Thermostat is set at 50. In winter, on sunny days, the room will warm up to 60 on its own. We are ballroom and Latin dancers, so we cannot have even a microbevel. It needs to be installed flush. My husband likes the lighter oak look and thinner width planks that would be real hardwood. We were told we cannot put real hardwood in unless we put a subfloor in. What are our options? Thanks.

[@danmayich3046]

Nice video, I didn't realize about the same 'effective' wear layer.

[@T_157-40]

Excellent: Question- is their a thin insulated - moisture barrier pad that helps later with creaking of floors later to place between concrete and engineered wood floors?

[@joe-say-did-it6201]

No none, most flooring glues good ones anyway have a primer /sealer, then flooring.

[@JoniAntonio]

Just dropped some serious dough on Natural Select White Natural White Oak 5 inch wide... I wish i had seen this video prior to making the purchase :(

[@BrentDaughertyMe]

So for installing directly on concrete one needs to ask for what kind of plywood substrate for engineered floor? A water resistant glue or pressure treated or what do they call it?

[@j3rocketeer]

Great video. Thanks for the breakdown

[@abcdefghijklmnop514]

You can roll on a vapor barrier before you glue it down if your concerned about the moisture.

[@basharatullah1425]

Thank you very much for this video very good information

[@alanrcrews]

Consider the quality implications of "cheap" versus "inexpensive", especially given the stability of the laminates/plywood?

[@mohamedshahrul1750]

@3:53 why u say engineered wood? isn't it a hard wood?

[@michellemooresings]

It has am inside of several interlocking woods to keep it from warping

[@OhJanney]

Excellent video. Super easy to understand.

[@zekehu7701]

Thanks a million for this video. You explained it so well.

[@vickiecook2911]

Awesome information!! Thank you!!

[@lesterlim7693]

In hot abd humid environments do engineered wood have a higher tendency to warp as plywood and hardwood expand and respond differently to the same amount of moisture and heat?

[@kayBTR]

I had a home built in 1955 with oak parquet squares on concrete slab. When I bought the house in 1989 I had the floor sanded and 3 coats of polyurethane mopped on. Still looked beautiful when I sold in 2021, and the house is in the Deep South. It’s humid and hot outside but the ac keeps humidity from being a factor.

[@handymancam5787]

What about using a peel n stick underlayment and gluing the solid wood flooring to that? Has anyone tried that?

[@LubaLuba1]

I have a very large room about 500 SQ FT I like to put something that has weight because I don't have sub flooring I have a concrete I also have underlayment because initially was going to put veneer plank flooring but it was too hollow sounding and crackle when I stepped on it. So is there a product for my situation??

[@BB-sm8ey]

On the other hand: I'm still able to restore 130 year old solid wood (pine!) floors by sanding the upper few millimeters off. Others have been doing the same thing before us for generations, and there is still enough meat on the planks that they are stable. Engineered wood is just another environmentally disastrous industrial waste product. When I see what's already happening to engineered wood buildings in the UK I could cry. "Eco beams" falling apart, Gluelam beams delaminating... Horrible.

[@ToOpen6seven]

WOW, thank you for sharing!! Nothing like the real thing!!

[@gabrieljardin1611]

Very helpful! Thank you so much.

[@nikhilkattil]

@JordanSmith I'm planning to go for a DIY on our master bedroom suing engineered hardwood and my subfloor is the actual concrete slab. So I believe i could use glue to get it done. But do i need to have a moisture barrier put in? But then how the gluing works for the hardwood on top of the moisture barrier? Kindly provide your inputs on this.

[@michellemooresings]

I definitely would if you can afford it

[@jamesn7223]

This is very informative. Thank you!

[@thmbk1234]

How about protection against termite?

[@TheViking85]

Hah! I was talking to a coworker on this earlier today when he was saying he'd never get engineered hardwood floors again, because the cruddy builder grade stuff he had was worn out after 7 years. Only point I missed was flying directly to concrete, so I guess I did okay, lol!

[@edwardperez6729]

Just subscribed, you've earned it. Enlightening, I always thought solid was the gold standard. Most engineer offer click and lock for floating method, which can make instalation easier. What's your thought on this method?

[@lauratempestini5719]

Can you have cork as a subfloor ?

[@Lisa-ym1si]

I wish I could get hardwood floors, but was told you can’t put them down over cement slab.

[@ngarci8040]

Answered all my questions…!

[@markknight5836]

Hi Jordan I am in the uk with a pex/water underfloor heating system under liquid screed (75mm). What’s your thoughts on laying the long and wide white oak planks? Glueing etc

[@JordanSmithBuilds]

Make sure that the glue manufacturer allows for underfloor heating, but I would be comfortable putting an engineered floor down on a radiant heating system.

[@robertwoodward1682]

Very helpful. Thanks.

[@jayvidhun6988]

I don’t how the effective wear layer is same for both. My understanding is that hardwood can be sanded many times. Is the sanding limited to reaching the lip?

[@RoadieWingZZ]

Sanding to the point of reaching the tongue / groove is the point where the problem starts.

[@BryenGraver]

Wow, crazy helpful. Subbed!

[@craigshields8806]

Very informative!

[@scorpio6587]

Very informative. Thank you. Btw, condensate is a noun, condense is a verb.

[@JordanSmithBuilds]

Thanks, Scorpio. You've been following me long enough to know that, although English is my first language, I'm still not fluent. 😄

[@scorpio6587]

@@JordanSmithBuilds Yeah, I know you speak Texan, ha ha. I hope I come off as helpful, since you are on an international stage now. And I say hot water heater is right!

[@Asta-wl8jz]

Excellent video. I was wondering about engineered flooring.

[@Ed-jg3ud]

Can you expand on cost difference. Is a 6mm wear layer engineer floor more than a true hardwood? If so, and you are installing on wood subfloor up north, and you don’t want/need large format/wide planks then am I wrong to say true hardwood is still the best option? That’s how I see it anyway. But I agree if going on to slab or need those wide planks than engineer w thick wear layer is best

[@kazsera7502]

Thanks for your great video, you helped me decided on engineer hardwood floor on my concrete slab foundation. Cheers and keep up the great work!

[@Edgardocelectric007]

Building a timber frame home I was wondering why not use engineer hardwood floor in the ceilings can it be done?

[@jus2319]

Sure, it’s all tongue and groove

[@cjspaul9900]

I didn't watch but solid wood warps and engineering is more stable. Wear layers are mostly the same like 5mm although some cheaper variations have only 3mm.

[@Doyle-Nutbush]

Learned a lot, thanks !!

[@gavinperry7237]

Very informative video 👍👍

[@JordanSmithBuilds]

Thanks a lot!

[@kenvng]

I am a bit confused. On some youtube tutorials they are saying that engineer last up to 30 but solid last up from 30 to 100 years due to the fact that it is solid and also i can be sand more than engineer. Is that truth? You said that their are both as in sanding thickness. This is where I am so lost.

[@michellemooresings]

You can sand the same if its a good quality engineered with a thick wear layer. 6mm preferably. On solid hardwood there's about 6mm before you get to the tongue (the groove where you connect two pieces of wood). So he's saying this is basically the same. You have to get a 5 or 6mm wear layer though in order to do this. And...The core (the plywood core of the engineered hardwood) has to be a good quality wood still. Like Eucalyptus wood.

[@BobRooney290]

i went to home depot to check these out. there was very little price difference. it was a no brainer to choose the hardwood boards.

[@zakglove6536]

It's crazy to put wood on concrete unless it's a floating with vapor barrier. It's always best to accommodate your subfloor. Wood on wood and Tile on concrete. Or floating on either.

[@billfisher8647]

Great job