very accurate and straight to the point video, still holds up 5 years later!
@theapriler5 жыл бұрын
Thank you! I took your essentials class in 2015, and am now a full time SW user! It took a while to get to the point where I could utilize assemblies, and the flexible assembly has been so helpful!
@jacobames87683 жыл бұрын
Hi April, I remember you! I'm super happy to hear that! I hope SOLIDWORKS has been good to you over the years.
@user-ze1hz3bu9s6 ай бұрын
Thanks! Was searching for a while this feature
@Iceblade0655 жыл бұрын
You are a life saver! Thank you so much!
@user-vz5el6km5l27 күн бұрын
thank you for the video, helped me MUCH!
@AtomicSloth448 ай бұрын
Great video, straight instruction, no fluff. Thank you
@nttnhat19213 жыл бұрын
thanks a lot. I've been spending 2 hours to solve this problem. Dont think this could be such easy like that!
@sandhyaprabhu6996 Жыл бұрын
Your truck assembly model is fabulous sir 🙏
@navindrensundraraj86134 жыл бұрын
Thank you so much for the clear and concise explanation!
@Rico387er2 жыл бұрын
A gentleman and a scholar.
@rubendragan65146 ай бұрын
YOU SAVED ME! THANKS!
@roiz53912 жыл бұрын
thanks a lot... you saved my life and my project.
@muzhichkov3 жыл бұрын
Thanks a lot!!! I didi it all my life too complicated!
@gokulsmartofficial46466 жыл бұрын
Thanks
@ahmadteknosteel96622 жыл бұрын
Thank you
@harrymurray13977 ай бұрын
you sir are my hero
@vikhyaths68144 жыл бұрын
Really grateful to you 🙏
@danielkolchev20253 жыл бұрын
Very helpful. Thanks
@denyssmolych3614 Жыл бұрын
Thanks a LOT!!!
@danaishrathore26593 жыл бұрын
I was worried, you helped me thanks
@matteo98263 жыл бұрын
Oh my god thanks, you saved my life
@lileshpantawane52193 жыл бұрын
Huge help sir appreciate your efforts
@randyrobertson60933 ай бұрын
How did you make the tailgate swing? The tailgate appears to remain plumb, or vertical as the bed is articulated.
@jimh61892 жыл бұрын
Comment to myself: 1:38 Nice video
@TKO-11 Жыл бұрын
The video was incredibly helpful. Thanks a lot
@ilmisumitro12592 жыл бұрын
You really saved me there! Thank you!
@jeffersonfloreztoro99333 жыл бұрын
Awesome! Thanks man!
@ganangsatrio34463 жыл бұрын
thanks
@bustopgamer58022 жыл бұрын
You are life saver. great job
@bhanukaabeykoon3592 жыл бұрын
Thank you for making life much easier ! Additionally can you tell me what kind of mate you have used on back door to open it like in 0:52 ?
@hidetsu72494 жыл бұрын
thanks a lot, I didn't know that
@TRAVIBLASTER Жыл бұрын
Thank you, U saved a lot of time
@sergiojoseph11644 жыл бұрын
Thank you!!!
@ethanbarlow18044 жыл бұрын
THANK you!!!!!
@duartepires15155 жыл бұрын
thanks man
@Dj688toneo2 жыл бұрын
Thank you so much sir.
@nocknock48322 жыл бұрын
ty>>>>
@isuruthiwanka94484 жыл бұрын
Thanks..I got it..
@jerry.janik893 жыл бұрын
You just rocked my world :D
@pujiri57523 жыл бұрын
Thankyou. very helpful
@harshsharma73643 жыл бұрын
thank u so much ...
@matthewmerrick44522 жыл бұрын
What about a flexible sub-assembly within a sub-assembly within an assembly? I'm having trouble making this work.
@habibaulia32233 жыл бұрын
thanks, very helpful
@maikolnay Жыл бұрын
de mucha ayuda, gracias!
@faahym4 жыл бұрын
oh my god THANK YOU
@Scott_G5 жыл бұрын
Is it possible to have the part be rigid at the subassembly level for drawings so it always shows it the same way, but then flexible in a master assembly to show the motion? Like if you have a drawing with the cab, and you want to always show it with the doors closed, but you also want it to be able to be opened up with it's in the full truck assembly? So if you made a drawing of the truck when you had the door closed and then you opened the door and reloaded the drawing, is there a way to always show an assembly in a certain state in drawings?
@hawkridgesystems5 жыл бұрын
Hi Scott, thank you for your feedback! Could you fill out our form here: bit.ly/2DNqU9N and one of our engineers can reach out to you directly to go into more detail on the assembly.
@nourhanmahmoud3064 жыл бұрын
It didn't work for there is a massage that sub assembly with layout sketches must be kept rigid How can i fix that please
@hawkridgesystems4 жыл бұрын
If you are using Layout Sketches or In-context design, you may not be able to make that subassembly flexible. To represent motion for such designs one approach would be to build a new second subassembly with the other components inserted. Since they are not defined in the context of that new subassembly, it should allow the motion.
@nourhanmahmoud3064 жыл бұрын
@@hawkridgesystems thank you very much
@tuyen3586 Жыл бұрын
Thanks! kzbin.info/www/bejne/q5mzfKd_a9V5pc0
@ronaldchampagne3430 Жыл бұрын
This does not completely work ! If you have subassembly with multiple points of movement NOT ALL OF THEM ARE FLEXIBLE , ONLY SOME OF THEM . Thought I'd point out another fine example of the extreme difficulty in using this BS software .