Solidworks Tutorial # 155 How to Design a JET GAS TURBINE Assembly (Engine) in SW Easy Design

[@alizekazmi3129]

Timestamps: 1:11 Compressor Blade 5:52 Compressor H 17:47 part 2 Stator compressor 22:46 part 3 compressor runner turbine 31:20 coplepe (?) 40:21 drive turbine 48:24 shaft 48:45 gear housing 52:52 f housing 1:03:00 Assembly

[@liyahtoonah7833]

Thank you very much for this tutorial. You can't imagine at what extent you've helped me .... Thank you very much. Extremely detailed explanation..👍🏼👍🏼👍🏼

[@karlheinzkirmayr6843]

Hello, I am learning solidworks and I liked your design, at 11:18 there is a cut in the video where it does not show the dimensions or how that part was made, please could you give them to me to carry out the project. Thank you very much your tutorials are great. PS: Sorry my English is not very advanced

[@SOLIDWORKSEASYDESIGN]

Karl Heinz Kirmayr Right .....I will Upload today, maybe I forgot this lesson while recording. Thank you

[@SOLIDWORKSEASYDESIGN]

Karl Heinz Kirmayr part-2 kzbin.info/www/bejne/q2SQd5eCmJd5pc0

[@ahmadhussen2151]

@@SOLIDWORKSEASYDESIGN Really, thank you. This drawing is required in days and I was confused because of this piece💖💖

[@ardasutcuoglu1368]

@@SOLIDWORKSEASYDESIGN Your correction in this video and the object in the rest of the video are not the same shape.

[@hourcompany]

this was great content ....i have learned a lot

[@SuperChucknorrisguy]

at 44:23 there is a dimension missing for the filet of the outer ring

[@alyaalrayhi9630]

In 15:04, you didn’t show how to do the circle on the design ?

[@dogguyful]

Awesome 👍👍👌👌🙏🙏

[@ezequielbendayan7883]

Hi, im trying to do it but i dont understand what did you do with the smart dimension 5.5 in 2:44 minute.

[@2ndlife320]

Solutions: 1) At 39:44 If anyone is facing problem, 1rst - Apply Offset Surface , Value - 0.20 , click on the outtermost circle 2nd - than apply Thicken it will work

[@abnereliberganzahernandez6337]

is it me or having acces to design complexity and geoemtry makes you feel that is quite easy, I mean theres statics an dynamics and fluid and thermal analysis but thats it. and the coast of alll that is having s super powerfull component capable of doing its task

[@ahmedbenz420]

Thank you very much ❤

[@ivanchloesoriano6283]

What did you do on 54:53?

[@divyanshnony3767]

Cuted video

[@Samiullah_prodhan]

I've made a similar jet engine.you can check out in my channel.

[@danielhumbertoperezlopezpo3886]

at 11:05 you skip the revolution 2 operation

[@SOLIDWORKSEASYDESIGN]

Not a required this operation....only use the assembly

[@SOLIDWORKSEASYDESIGN]

Thank you

[@SOLIDWORKSEASYDESIGN]

DANIEL HUMBERTO PEREZ LOPEZ PORTILLO StonedCrackerofHell I will Upload today, maybe I forgot this lesson while recording.

[@SOLIDWORKSEASYDESIGN]

DANIEL HUMBERTO PEREZ LOPEZ PORTILLO kzbin.info/www/bejne/q2SQd5eCmJd5pc0 missing part 11:17

[@Vijay-re6bf]

In 44:42 fillet part is missing

[@elkharrabsouhail]

Thank you very❤

[@kailashsingh9737]

Very beautiful sweet sir hi ji

[@shivamagarwal9084]

BRO WHAT DID YOU DO AT 1105 ....HOW DO I GET THE DIMENSIONS FOR THE 2ND REVOLVE CUT

[@SOLIDWORKSEASYDESIGN]

Shivam Agarwal StonedCrackerofHell I will Upload today, maybe I forgot this lesson while recording.

[@SOLIDWORKSEASYDESIGN]

Shivam Agarwal kzbin.info/www/bejne/q2SQd5eCmJd5pc0 missing part 11:17

[@adrianpaez717]

Nice

[@SOLIDWORKSEASYDESIGN]

Thanks

[@kuaranir2440]

11:19 I didn' get how did this geometry on the right appear?

[@jatindalmotra1161]

kzbin.info/www/bejne/q2SQd5eCmJd5pc0

[@johnhoyle6390]

modeling a jet turbine engine solidworks.

[@omertop9772]

That is a great tutorial. However there are some significant mistakes especially dimension missings.

[@SOLIDWORKSEASYDESIGN]

I know....please check the second part.

[@SOLIDWORKSEASYDESIGN]

kzbin.info/www/bejne/q2SQd5eCmJd5pc0

[@VIVEKYADAV-sw3ig]

It's not completely covered & also the shaft inside can move...which does not happen in actual i hope... soo maybe assembly isn't fully finished in this ???

[@normanny7760]

when did you make the shaft

[@bramheins2795]

Thank you for doing this but why you forget so many dimansions????

[@joserodriguezcastro1629]

What kind of model is this turbine?

[@ClementWilfredweidle]

39:44. I'm not able to apply the thicken feature

[@2ndlife320]

Apply Offset Surface , than give value of 0.20 , than apply thicken

[@tunaycelep2582]

what does ''coplepe'' mean? Is that the name of the component?

[@jjelsultan9255]

Excelente me puedes compartir tus planos?

[@joeabraham56]

Great work brother.. Can u please let me know How to do working animation in this .?

[@wiser1147]

can you please send the link to this CAD drawing?

[@keremali9840]

In your grabcad account is there exist this design?

[@SOLIDWORKSEASYDESIGN]

I think no....

[@keremali9840]

@@SOLIDWORKSEASYDESIGN i found Thank you.

[@aditya-ml6km]

Rushed video. Skipped video several times while sketching or creating a part. This video was made for teaching 3D CAD or for showing off your skills?

[@amrizalds9108]

you dog, fuck you ass hole

[@jahnavisugganaboyina3893]

did you realize your design is under defined. Lot of missing dimension. If this is a tutorial please do update the housing dimensions.

[@ranheeshin3208]

may I ask what specific engine is this?

[@SOLIDWORKSEASYDESIGN]

Basic design

[@ranheeshin3208]

@@SOLIDWORKSEASYDESIGN I mean are the dimensions your own made? or did you follow a specific model?

[@gozdeaycan4570]

11:20

[@dorinxavier2230]

I tried to follow your model....but some parts you have skipped the making...i really request to to kindly go through the video if ur making to help students and not simply waste their time

[@newmedia6490]

😍

[@somyaprasadsahoo7073]

no dimension in 26:20

[@lindavalentinapinedaarenas7922]

Could you write the names of the parts here?

[@fal33]

do you have the name of the parts

[@SOLIDWORKSEASYDESIGN]

Turbine Engine

[@pmth9741]

PLZ GIVE THE FILE PLZZZZZZZZZZZZZZZZZZZZZZZZZZZ

[@baqer9927]

11:19 Can you know my what happened

[@SOLIDWORKSEASYDESIGN]

Please watch watch 2nd part .....

[@miguelangelbarraganpuentes4628]

@@SOLIDWORKSEASYDESIGN WHERE THE SECOND PART?

[@SOLIDWORKSEASYDESIGN]

@@miguelangelbarraganpuentes4628 kzbin.info/www/bejne/q2SQd5eCmJd5pc0

[@khawarali3924]

So many steps missing

[@MRDELL2448]

are you up for doubts? would you mind sending me the second part ?

[@SOLIDWORKSEASYDESIGN]

Mrinalini Poondla StonedCrackerofHell I will Upload today, maybe I forgot this lesson while recording.

[@SOLIDWORKSEASYDESIGN]

Mrinalini Poondla kzbin.info/www/bejne/q2SQd5eCmJd5pc0 missing part 11:17

[@alizekazmi3129]

1 09

[@MHadron]

Is the clicking REALLY fucking necessary!?

[@nishantduttmishra2903]

music is seriously annoying

[@SOLIDWORKSEASYDESIGN]

Mouse click ??.

[@nishantduttmishra2903]

@@SOLIDWORKSEASYDESIGN yeah, but it should be something which relaxes ears while workings on such a complex design

[@StonedCrackerofHell]

"How to design" my ass. Completely skips showing a step at 11:17

[@SOLIDWORKSEASYDESIGN]

StonedCrackerofHell right .....

[@StonedCrackerofHell]

SOLIDWORKS EASY DESIGN how’d you do the second revolve then man. I had to eyeball it from yours.

[@SOLIDWORKSEASYDESIGN]

StonedCrackerofHell I will Upload today, maybe I forgot this lesson while recording.

[@StonedCrackerofHell]

SOLIDWORKS EASY DESIGN appreciate it. No hard feelings. Love the video.

[@meenakshimunakhiya3333]

Nice

[@SOLIDWORKSEASYDESIGN]

Thanks