SolidWorks Tutorial

sw-tc.net/#181 SolidWorks Tutorial Cola Bottle
►Car Engine full tutorial:► • SolidWorks RE Tutorial...
►For more bottles : ► • Bottles
►SkateBoard:► • Project2: SkateBoard
►Helicopter:► • Project 1: RC Helicopter
►Bus:► • Project6: Mini Bus
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
----------------------------------------------------------------------------------
All dimensions are in mm/g/s/ISO - Based on true dimensioning!
---------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
---------------------------------------------------------------------------------
The average length of a tutorial is 10 min., if longer, it's divided!
--------------------------------------------------------------------------------
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful!
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketch
- SolidWorks Surface
- SolidWorks Motion
- SolidWorks Weldments
- SolidWorks Mold Design
- SolidWorks Simulation
And MORE
►►►SUBSCRIBE ◄◄◄
----------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
------------------------------------------------------------------------------------
----- ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ -----
------------------------------------------------------------------------------------
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►AutoDesk Inventor Tutorials:► • AutoDesk Inventor Tuto...
▬Facebook► / solidworks.tutorial.page
▬Google+:► plus.google.com/u/0/b/1027607...
▬Offer me coffee:► www.paypal.com/cgi-bin/webscr...

[@MythicGuitarCompany]

2 years ago, i would have been so lost. This would have been so far out of my reach. But thanks to videos like this one, 2 years later, i see this same video and think "oh, super easy! cool, i like how he did that, oh, that's a new move. ok he's going to shell it... yup..." etc. what i mean is....... thanks for the video. videos like this helped me to get a career in engineering for manufacturing.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@kenhgiaitri1145]

Học Solidworks Free tại: kzbin.info/www/bejne/gISxn2Z-frRsisU&list=PLXxTcphk-bsW68aWdJtr_FrR2gsV7swPg

[@scobius1]

Dan Lavoi's Lamborghini Galardo tutorial series is the go to for solid works learning!

[@quantumfreeze257]

I'll get back to this after I catch up on all those network engineering video's

[@zhongyisu3113]

No sounds but very clear. Thank you, I followed your steps and made the bottle in one hour!

[@2minutetech899]

you can see this video kzbin.info/www/bejne/qn6QdJawfbembsk

[@iamcomputerfixer]

Clever Annette. Thanks Derek & happy Christmas.

[@priyanshurai5939]

beauty of design reflexes through your art

[@christiancelis7832]

Muchas gracias por compartir tu conocimiento. Sin duda realizas excelentes tutoriales. Y para las personas que se quejan, es porque son tutoriales para personas que ya saben ubicar las herramientas y manejar el programa más allá de un conocimiento básico, uds deben de ver niveles básicos y aprender antes de querer realizar este tipo de modelado, en lugar de estar insultando al maestro. Me parece que no necesita explicación de forma hablada, la botella me salió a la perfección. ¡Gracias!

[@piotergaming6533]

You took the words right outta my mouth.

[@Leahguitar]

I am amazed! wonderful job and use of skills.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@karbanatek99]

Great job!

[@superfreshbiltz]

Now I feel like I have no clue how to use solidworks anymore.... after seeing this.

[@kushagraroy5081]

Checkout kzbin.info/aero/PLms4SjOtNO2OUZ8k_TF7wpBCPQJiwKYVy

[@CADCAMER]

Watch my video also of same topic uploaded today. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@leo-yw9ok]

I use SolidWorks to complete the modeling, the rendering effect in the video is really good, I hope to learn the skills of model rendering. I come from China, English is not good, with the help of automatic translation software to communicate with friends

[@danielasirianni1426]

My opinion again: wonderful for us! Again: wonderful!

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@OtodidakSolidWorks]

Wooow .. I tried to make the design, but I couldn't do it as well as you. Simply put, it would be excellent if your film included an explanation with sound and subtitles. In any case, it's a terrific practice for aspiring designers. Thank you for sharing, friends. I will be waiting for feedback from anyone who would like to, thank you.

[@Rasyonel_Pisces]

Very good tutorial! thanX bro

[@ossamahareedy562]

damn you dude XD i thought my speakers were out of power and i was f*** made then discover this

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@huanganda1128]

Thank you very much, I learned a lot of knowledge from your video, this video is very valuable, I fully recommend.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@rackball8487]

Awesome video and great skills! Thank you very much for the tutorial!

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@fizzybubblyify]

I need a coke after watching them skills nice job :)

[@kiubiz3942]

Thank u for being a great human being and taking ti to help all of us noobs out cheers

[@ctm8k45]

hi STC, pls guide me how to make the extrude block look sparkle like stainless steel (like the surface of the coca bottle that you are drawing)???

[@mosta7050]

you're awesome man keep goin'

[@usuariosolidworks4509]

Excellent video tutorial. Thank you so much for sharing it!

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@a.4ziz455]

sangat membantu utk yg msh pemula tapi saran saya alangkah baiknya gambarnya di perjernih lg sehingga text kecil bisa lebih jelas terbacanya... trimakasih

[@bambambooyaaj6239]

If you just play with 3DSolidWorks on a daily basis for like 1 hour a day then you would understand everything he does. Had to learn this software by myself and I can comprehend his steps well.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@boscocq8188]

Could somebody tell me what do you do to see the pieces shine like that? my pieces are always opaque, I want some pieces to shine but without rendering them

[@miz249whbbeo]

this is pretty cool! gonna try it out , hope it works! thank you

[@cebe-kv]

It works just perfect after your help. Thanks a lot

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@EduFeastFamily]

This is very good and thanks to you. This is a great skill and very good video. Awesome, again thank you.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@michaelzajac5284]

Dear Solidworks Tutorial Use to set the image display quality options: Click Options or Tools > Options > Document Properties > Image Quality. It made smooth circle.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@michaelzajac5284]

Dear@@CADCAMER , This is fascinating. I'm surprised you are here. I didn't hear music, I am deaf.

[@DanielAndradaCDI]

Excelente demostración!! Felicitaciones y muchas gracias!

[@solidlecciones]

nice i like it, thanks for sharing!!!!

[@samirtalab3424]

your perform are awesome ....

[@annaveselova]

Great tutorial! Thank you!

[@Sw-tcNet]

Anna Veselova Many thanks to you Anna!

[@spencerferguson6227]

***** you are mean

[@spencerferguson6227]

***** k

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@moisessosa8112]

Ayuda, ¿como puedo colocar la punta del arco en la tangente del circulo? Helpe please, How I can put the tip of the arc tangent of the circle?

[@mustafaalhusaini8342]

Impressive ! great work

[@nikon2704]

thanks for your precise lecture. You know this program very high. Admire you. Alex

[@karimgadelrab7027]

Work of art!!! very well done.

[@over-playyt9123]

sen fou

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@quangnhatle2512]

Even with no sound but a nice tutorial, I learned a lot. Thanks

[@the-tribe5921]

Great tutorial. Thank you

[@FrenchieYang12]

At 14:55 when you created a plane for the bottom cut of the bottle... for some reason every time I created that same plans... the coordinate system flipped and isn't set the same as yours? I'm a little confuse... yes I can find ways to flip the extrude cut other direction but just to be precise on the same step as yours... please give feedback

[@iTHeo1]

Same problem... and I can't change the directions of axis

[@luisbolanos954]

Excelente tutorial, gracias

[@nazikmohamed]

Hello sir,This video very helpful for our Design Study.Thank yo

[@user-pk3ov7hp9c]

Thank you for built and shared this video, I wandering that when you build a multiple parts assembly, which model display card is suitable. I'M about to update my computers equipment.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@semihaksoy8182]

Sir, What is the differences between solid modeling, surface modeling and sheet modeling? Please answer. Thanks in advance

[@kentaro1340]

Nice work. Thanks a lot

[@Sw-tcNet]

Bảo Nguyễn Thanks Bao!

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@skskvlog]

Excellent tutorial sir. How your model image quality is so high and glossy? How to change the model image quality setting?

[@SuperdaMachine]

Perfect design

[@HaseebGlobalTV]

very good, this is amazing creation

[@pateldevang6198]

Great work.

[@darkopecanac1807]

Sine hvala puno, olaksao si mi.

[@Electronics-Tutorial]

Nice tutorial, thank you

[@over-playyt9123]

prout

[@micanicaadel9511]

je te remerci sur la qualité du travail, moi aussi j'ai une chaine youtube pour debutant sur solidworks, merci encore une fois. I thank you on the quality of work, I also have a youtube channel for beginners on solidworks, thank you again. أشكركم على جودة العمل ، ولدي أيضًا قناة youtube للمبتدئين في Solidworks ، شكرًا لك مرة أخرى

[@2minutetech899]

see this videos kzbin.info/www/bejne/gn6nqGWCh6x4gpo kzbin.info/www/bejne/qn6QdJawfbembsk

[@marcus32291975]

Hey nice work

[@cd2012rom]

Why it is silent????

[@demetreyoung8044]

This may be later down the road, but could we do some plastic tests with the bottle? Or something similar if you have the mold flow part.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@gurujayaramegowda656]

Nice work

[@victortung7286]

Great Video!!!!!!!

[@oliverallison3028]

great job

[@mrs.marys.travelers5962]

Thanks for showing.

[@adicohen1763]

what was the function of the split line at minute 8-9? could someone please explain. very helpful video thanks

[@tomwebb3016]

I know this is late, but it might help other people too. This is used to trace the circle drawn at the top over the uneven surface of the cut underneath.

[@SohilShah_Melodyman]

Nice one!!

[@cadcamworld494]

great job thank you

[@erikponce2829]

haces simulacion de flujo de aire? Si conoces a alguien, recomiendalo, me urge.

[@PieroStuff]

Are you following some sort of blueprint? If yes, where can I find it? It would help to give more sense to some of your moves. Thanks :)

[@Hirudin]

Wow, nice! Thanks!

[@unodernier]

Hirudin

[@silanthoverho5823]

精彩表演，看完冲动

[@usuariosolidworks4509]

Nice job!

[@thaprawee9178]

Wooo! very good.

[@papabur503]

Thank you!!!

[@pedrosantamaria4182]

Musica celestial. Tanto la cancion, como la del manantial !

[@troquelarte439]

aspero good man

[@kopo9499]

Awesome video thanks

[@danielasirianni1426]

Sensacional! Imagine um trabalho sem defeitos!!! Wonderful!!!!! Can you imagine one work without problems and without strakes? It's this work. Perfect. Thanks to show me another development of the best technology of the world: a technology of the UNITES STATES OF AMERICA!!!!! With no problems and only success.

[@mxozone]

KKKKK mamador de americano

[@BeWithWasif101]

Congratulations for 300k subscribers sir

[@AbdurRahim-ol6vv]

Plz sir give a tutorial of ICU medical bed tutorial as soon as possible

[@haftir]

Hi, I was wondering ; how do make the surface always shine like that. In my solidworks, every extruded part is dull, not shiny like yours.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@islamicchanneltv1088]

bro i your work is awesome but ur add is so awesome i watched your full add

[@halgreen2546]

This is cool.

[@leangengaleadsit7299]

Thank you!

[@silasgoma1686]

My geometry does not twist all the way around the helix like yours does @24:00

[@user-cy7so3ot9q]

That's bc the starting point for the helix curve is not same as the trapezoid he drew on 22:57, you can try write the degree to 0 or 90 at 22:36(when you are creating the helix curve)

[@rollformer5660]

Good design

[@Suit_and_Sandals]

kzbin.info/www/bejne/eqSTlmWhoJakfrc Another interesting model

[@al-aminislam7854]

the fillet at 18:30 is not working, if u have any explanation or solution plz

[@atakanugur1780]

How did you make polish surface ?

[@Qwerty_c]

Esto seria nivel DIOS 😎 impresionante manejo de SW cuantas horas le dedicas para manerjarlo asi?

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@cokedupnormies2651]

Can you make an assembly where there is a bottle.cap that can be rotated off?

[@Sw-tcNet]

exactly what you want is here: kzbin.info/www/bejne/mWKvkHauZcypjpI

[@user-bp8yb4kb5b]

Очень круто, спасибо за переданный опыт

[@Li-it8rw]

so good!

[@user-qw6co2io6j]

很棒的教學.感謝教學

[@rubocadete]

Can you sketch a gimbal for mobiles?

[@dualmassflywheeldmfrepair5370]

Congratulations already subscribed here.

[@cadcaetutorial2039]

this tutorial is very nice sir

[@12345LUU]

Nice video! Thank

[@WahidFayumzadah]

How to do the chamfer when you make a swept cut ?

[@EatmaKnuts]

I know after 4 years it’s irrelevant to you, but to anyone looking for the answer like I was, do not forget about the angle that is at 10 degrees. Mine was default 45

[@cadcaetutorial2039]

cola bottle explain very nice sir

[@juanespinosa9657]

Cool!

[@antoniolunardini1486]

soddisfatto per l'acquisto di Dymo Label

[@GadderInd]

your are The Best

[@shijurajan7]

excelent..

[@jon4571]

why i can't fillet like in 25:10 ? Error Fillet33 Failed to create fillet. Please check the input geometry and radius values or try using the "Face fillet" option.

[@piessika]

+dani ren Me too mate, in my case, it's possible though. But I get this thread around neck empty from side faces (yes, it sounds funny).

[@piessika]

+Majkelson Small solution! Decrease the radius of fillet to 6 mm.