Solidworks tutorial | Design of Two Cylinder Engine in Solidworks

[@gerardinearmstrong2899]

0:50 Part 1 Engine block 40:08 Part 2 Piston 47:27 Part 3 Pin 48:23 Part 4 Connecting rod 54:20 Part 5 Pushrod 1:00:14 Part 6 Crankshaft 1:05:58 Part 7 Rocker Arm 1:17:54 Part 8 Crankshaft sprocket 1:30:06 Part 9 Camshaft Sprocket 1:41:15 Part 10 Arbor 1:44:32 Part 11 Valve

[@gstrdms]

You taught me more in 2 hours than 40+ hours of SolidWorks classes at a technical school. Real comment.

[@parthpatel3729]

Sir , u rocks !! after completing this assembly , I learnt lot new things !! All credits goes to ur stuffs !! Thank u...Plz keep posting sir !!

[@-m7k0z7-9]

He's doing it as if it was a piece of cake. Amazing!

[@glendcruz6456]

I did this drawing of yours on Inventor and it runs perfectly. The only problem I had was with the twisted gear, as older versions of inventor does not have this tool. However I improvised and got it right at least in appearance. Thanks for your tutorial, you are a very generous man and an excellent tutor. How about drawing a six cylider or V8 engine. That will be much appreciated.and will keep me going in my retirement.

[@Brandon_2878]

Great tutorial. At 10:10 I think you should have created a new plane offset 12.5 mm from the front plane. Then mirrored the revolve1 feature using this new plane instead of using linear pattern. The results seem much better this way. I have only completed the engine block so far so I apologize if you have fixed this later in the video.

[@CADCAMTUTORIALBYMAHTABALAM]

Brandon its true i should create a offset plan instead of linear pattern, i will take care in coming videos Thanks,

[@marcinpaskaphd]

Another impressive tutorial, thank you!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks Bro,

[@marvinborlagdatan8947]

Thank you CAD CAM TUTORIAL I learn a lot from you...

[@patdayclan4190]

i learned a lot from you

[@adityagomte9265]

Nice video for solidworks user thanks you sir

[@autojando7223]

Beautiful! I love your laptop graphics and your speed too.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks bro i am using Dell Precision M4800 laptop,

[@autojando7223]

I am using a HP envy M6 laptop with Core i5 processor, 6GB RAM and 2.5GB AMD Radeon 7670M graphics but its just to shitty for SolidWorks. In fact I am scared of frying my processor so I avoid heavy graphics tasking such as photorealistic view. I'll move on to something higher soon though. Good job you're doing, keep it up!

[@vishaldubey1169]

I learn so much from your vids man keep up the great work!

[@doyouknowthisstuff8349]

Best designer in solidworks. Can you make eccentric crank shaft assembly?please

[@mehmetberkkaracam2434]

well done. thanks for your time 👍

[@CADCAMTUTORIALBYMAHTABALAM]

Mehmet Berk Karaçam Thanks & you are the most welcome.

[@mateoberardo5898]

Nice explaining. Thanks for your job

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks you so much:)

[@new-uu2lv]

Thanks sir this video really helped me to learn new commands and many things this video really helped me thank you so much sir , keep posting such videos ☺️☺️

[@berkeaydin8746]

hello your drawings are beautiful

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@alifarokhisarijloo6589]

Well done. Thanks. Can you please share the dimensions of the engine? I want it for my students as a project.

[@harshitdhiman8131]

it's a nice video ...

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@akm5368]

What an engine it is

[@ricardovazquez2324]

did u find out? I need to know it too!

[@yazanalzakout1706]

, thank you sir, I love your videos Can you tell me how the appearance and reflections appear on your screen and what settings you use to show that beauty I want you to upload videos, how to make animations, and convert them to high resolution video. All respect for you and your wonderful channel

[@yazanalzakout1706]

11

[@NarutoFan4188]

You're very good and the videos have been a big help. Can I ask if you've already done a Cantilever screw press with rotary nut ? Or if you can do it soon ? I hope I'm not asking too much

[@CADCAMTUTORIALBYMAHTABALAM]

let me study if possible sure i will do in future tutorials,

[@fariduzzamanpapon398]

Sir, i have a request. can u upload 2D sketch photo. if u upload photo we will try self study ..please upload photo from next tutorial ..advance thanks

[@MostafaTawfeek--]

i do appreciate your magnificent work ,but i have a question; every piston cylinder should have two valves am i right or something wrong with that ?? thanks in advance ,bro.

[@kasiviswanadh7526]

sir pls upload hvac design tutorials in solidworks

[@CADCAMTUTORIALBYMAHTABALAM]

ok fiend i will try,

[@kasiviswanadh7526]

sir hvac design tutorials cheyara solidworks base

[@JRichard1973]

I look very much on your very tutoring tutorials.I learned a lot from you, thank you I'm sorry for my criticism, but this engine would never work. The crankshaft must have a smaller toothed wheel, cam big wheel

[@CADCAMTUTORIALBYMAHTABALAM]

this is not the real engine or image, just a working model for beginners for sketch , thanks for suggestion i will try to close my projects with realism,

[@JRichard1973]

Yes of course. Your work is great, I know it's just a sketch, but it was a lot of work. If there was no technical error, it would be top! I'm looking forward to your next tutorials Richard

[@jaferhussain4928]

Nice tutorial, I appreciate your skills and presentation.But sorry to say you that, each cylinder must have two valves ( suction and exhaust ), hence in two cylinder engine, you should have kept 4 valves and related structure. Also number of teeth on cam and crank shaft gears must be reversed in your design.

[@army8756]

Thank you Teacher

[@diplomatutorial3256]

Thank you so much sir

[@jaytalreja6149]

can you make mud pump? Or can you give me some guidance how to make it?

[@CADCAMTUTORIALBYMAHTABALAM]

mud pump, let me study,

[@jaytalreja6149]

CAD CAM TUTORIAL thank you

[@mdmahmudulhasan5473]

Can you please upload solidworks motion tutorial?This is rare in youtube

[@CADCAMTUTORIALBYMAHTABALAM]

Ok i noted i will do some tutorial videos on Solidworks motion,

[@corkonings2232]

is it possible to make a tutorial about tube and pipe routing start from the beginning

[@CADCAMTUTORIALBYMAHTABALAM]

ok i will try,

[@berkeaydin8746]

when can you do the scissor lift project ?

[@CADCAMTUTORIALBYMAHTABALAM]

scissor lift also in my list soon you will be able to watch,

[@berkeaydin8746]

Motion view Will it happen?

[@berkeaydin8746]

Would movement screen also there? I would be appreciate if you could make this in one week.

[@CADCAMTUTORIALBYMAHTABALAM]

ok

[@berkeaydin8746]

Thank you 😊😊😊😊😊

[@solaceterran2549]

Could you PLEASE attach the BLUEPRINT of this Assembly. Thank You

[@irannahanjagi6584]

Which software ur using for designing

[@nikhilakalia9692]

SolidWorks 2017

[@avulashandilya9884]

could you please make a video on carburetor and its parts

[@corkonings2232]

thank You cad cam

[@ricardozayas2174]

How can I use toolbox in this assembly? Is for a project ✔️

[@CADCAMTUTORIALBYMAHTABALAM]

both the gears you can import from toolbox,

[@ricardozayas2174]

Thanks, you should to make a video of this project but without interferences

[@reazuddin6577]

Hallo' sir I watched every viodes. I have a problem. when I draw and objects after all eand I use matrile but it's not looking like shine also not look real view . it's look dark after attached materials from approaches tools. I can solve it? plz sir slove it means.

[@CADCAMTUTORIALBYMAHTABALAM]

Dear Reaz i am using Nvidia Quadro graphics cards ,For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.

[@rudesback5013]

thank you sir

[@nagarajkolur2332]

sir please add some videos on GD & T. how we use GD& T symbols in solidwoks. suppose we did a assembly model then how we apply the GD & T symbols and values to the model. we know modeling assembly but domt no how to useGD & T symbols on models. few days back i attend an interview they asked question on GD & T. I feel my mind completely blocked so plese if you add some videos on GD & T and how to apply them on models it will be a helpful to all the leaners. THANK YOU

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks Nagaraj its very important topic i will cover it soon,

[@nagarajkolur2332]

thanks a lot sir

[@railgun1935]

thank you so much

[@santhoshs-zu7ji]

can we print in 3d printer

[@CADCAMTUTORIALBYMAHTABALAM]

santhosh s yes you can print in 3D printer.

[@01obedrajgladwin77]

You can use patter to make fins @10 min

[@anwarzadjali412]

hello sir why when i copy some sketch from top plan to plan 1 its being its direction be other side 180 deg thank

[@CADCAMTUTORIALBYMAHTABALAM]

please mention time ??

[@anwarzadjali412]

what you mean by time of

[@ayushsahu8986]

The two valves are opening and closing at same time.they should be alternate

[@fasiuddin4800]

Is this 2 stroke 2 cylinder engine

[@mehzadirani3160]

Do you teach in any cadd centre

[@CADCAMTUTORIALBYMAHTABALAM]

i am working actually in saudiarab, in production unit,

[@akm5368]

How much does one cost?

[@alinurinur4642]

I need this solids drawing for my lesson. İf you send this drawing to me, I woluld be grateful you

[@mehzadirani3160]

From where u see the question try to corelate between question and answers

[@mhamadnazar1985]

he is giving me some problems in mate despite i did all the steps like you

[@CADCAMTUTORIALBYMAHTABALAM]

what kind of problem & where you found ? mention time.

[@mhamadnazar1985]

the problem is that i cant attach a picture here, otherwise i would show you. the problems are most in mates(coincidence ones) for example between the two crank parts, the error appears after i start the motion analysis i think so

[@brianwesonga8077]

could you kindly do a motorbike

[@CADCAMTUTORIALBYMAHTABALAM]

motor bike is too big project but it is also in my list you see in future tutorials,

[@BalwinderSingh-kn3ug]

pls design car knuckle

[@CADCAMTUTORIALBYMAHTABALAM]

sure i will try,

[@anviator4434]

There's some video in your Ads. Nice tutorial tho Thanks

[@bachbach7789]

Where do you get the parameter ? do you can help me???

[@khushwanths9935]

hi sir,can u send the parts of this assembly

[@ngocthupham1035]

Can u help me ''ROBOT SCARA MITSUBISHI'',PLZ

[@CADCAMTUTORIALBYMAHTABALAM]

let me study first,

[@ngocthupham1035]

Thank you,hope you do it soon.

[@namnguyenphuong7305]

may you send my about draw, and i would like to practice , thanks you so much

[@romlef526]

top

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@venkatakrishnareddymoram1019]

Please provide 2D drawings sir

[@bhuvi91]

engine block dimensions who

[@InventionFort]

learn learn learn about solidworks

[@Harshgupta-bu6jl]

Sir please provide the drawing with it

[@derschutze7715]

👍🇹🇷🇹🇷🇹🇷

[@kashan_solidworks7021]

آموزش سالیدورک از صفر تا صد لطفا به پیج ما سر بزنید

[@aaronwaskow1746]

This is so incredibly inefficient. You can achieve the same results in far fewer steps than shown: The redundancy is ridiculous

[@jimitprajapati1722]

Why can't you upload drawing sheet for dimensions for all parts?

[@ankitpanchal7701]

2d drawing

[@venkatasuryanarayana-]

sir u first speak loudly

[@ankitkumarrana6251]

1726486

[@aslanrg6169]

berbat

[@prolifers5038]

This is not good

[@lekhrajdewangan8491]

Thank you sir