Solidworks tutorial | Mold Design in Solidworks | Cavity and Core in Solidworks

[@indulahemachandra6460]

Very easy to understand and remember every point. I learned SW because of you sir. Respect from Sri Lanka. ❤️

[@chamikanadeeshan7251]

Same bro. This guy is a life saver.

[@kandasamyrajan]

Thank you very much for the tutorial. I have been expecting a tutorial like this. It is a new perspective in mold design.

[@engsaadka]

Thanks so much for your help. We want to see more complex molds that's required to surface tools to close the open faces. We appreciate your efforts.

[@CADCAMTUTORIALBYMAHTABALAM]

sure i will try some complicated molds,

[@fernandoflores3161]

@@CADCAMTUTORIALBYMAHTABALAM yes please

[@AnoopYadav-s8e]

So nice of you sir, i appreciating your content delivery method.

[@SONUPRAJAPATI-vj8cj]

Thank you so very much sir.. Really i learnt a new module about molding from this video..

[@polarmsm8352]

You are doing a really good job.Keep up the good work.

[@CADCAMTUTORIALBYMAHTABALAM]

Carlos junior Thanks,

[@darshankapadia7881]

Excellent videos by you. Sir, please add drawings in a description so that we can practice by our own.

[@CADCAMTUTORIALBYMAHTABALAM]

i will try to add 2d drawings in my future tutorials,

[@ravichandranjothiraj6628]

really very informative, thank you

[@dishankshah5080]

You are doing great job.plzz make videos on car desigb.it will give us so much help.

[@ridvanrizvanoglu5800]

Sir at 8:20 why didnt you used draft expert to fix draft problem(as in 1st video of this playlist(about button mold) ) but made it manually instead? Is there any necessary reason?

[@rezaheidary3241]

thank you for your simple and useful help.

[@md.rakibulhasan8475]

thanks for your nice works. your tutorial is very helpful. please, make CAM tutorial.

[@hienaz723]

THANK YOU FOR YOUR TUTORIAL . IT HELP ME CAN MANUAL DESIGN CAVITY AND CORE FOR MY MOLD DESIGN THANK

[@kevinortiznunez5804]

Great video. What book could I use to learn how to make these types of molds un solidworks????

[@origami_canoe1952]

This was very educational! Thank you so much

[@polarmsm8352]

Good job!I really admire your videos.

[@amarjitsingh7457]

Te sir ki ap ek complete video injector plate , core,gates etc jo vi ek proper mould design naal related operations a ohdi complete video vi upload karo

[@dreamerseas5973]

Awesome, exactly what I needed! Thanks so much

[@rodrigodossantos3536]

Thank you, absolutely useful!

[@amineblogs137]

THANKS LOT BRO ITS SO GOOD MOLD

[@kandasamyrajan]

It is highly appreciated if you can show how to use Mold tool to same part. You showed before but that was a part with symmetry.

[@КошараВіктор]

Thank you.Дякую Вам.

[@adwaibowlekar3943]

Great video

[@amiraskari4783]

Thanks so much for your help

[@CADCAMTUTORIALBYMAHTABALAM]

:)

[@amoghmangalam3130]

Please upload Gating system design also . It will help to understand the Gating system .

[@ucthanghoang8413]

thank so much from your help.

[@rashidusman3417]

Sir ek video mold flow ka bhi bano.. Solidworks me sir

[@manikkammn]

Thank you so much for guidance please make a tutorial for all mold tools and surface (one by one explain)

[@prathamshah2013]

Thank you so much sir 🙏

[@mangeshdeshmukh2140]

very well explained

[@shubhamsharmavit]

Can we make cavity in ASM... Without draft and use mold tools.. any difference blw them ..

[@Clinton19831]

Great Stuff ! Much appreciated.

[@abuumarabdulloh3393]

Thank you very much for the video

[@Dumdaar_motivation]

is this an injection moulding or blow moulding?

[@amarjitsingh7457]

Sir jado vi mould ta component tyaar karna a ta ki draft har bar bar operation Jo vi component nu tyaar karn lyi karna a sub CH dena painda a te ohde naal har bar draft out ward ja inward vi dena painda a eh DSO ap

[@prathapthirumal1618]

thanks so much for your help. We want to see more complex molds that's required to surface tools to close the open faces kindly post more videos on molding..... thanks in advance....

[@HafizMWaqasBadar]

hi, thanks for ur good tutorial, everything was fine but I want to know why u created the draft outward. because if we pull our core and cavity out it will be stuck due to outward draft. kindly explain this

[@Hayppyness]

Sir, in the previous video you did cavity creation with parting line and tooling split and here, you didn't do it . Why is that ?

[@rahuljangid9143]

Very well! I would like to skill up myself in the moulding in solidwork. Please share some examples by mail.

[@ranjithr8830]

Hi, I have a small question, If I receive a part in STP or IGS format then how can we suppose to do Draft analysis modifications that you did in this assembly?

[@smalik314]

Sir i want to learn mould desit perfectly please give tips.

[@ss2824]

try using cross sections. cant really see whats going on inside. Or try making making your outer components transparent.

[@MrTjmk]

This couldn't have come at a better time for me. I'm presently working on an injection mold in Solidworks 10. I'm self-taught in Solidworks so it takes me a long time to figure out this kind of design on my own. I wanted to ask; the mold you've designed in this video appears to be a mold used to stamp the form of your part. If this were an injection mold, how would you go about placing the injection holes? Does the Solidworks software understand the placement of these holes or is their placement based solely at the disgression of the designer? In my case I will be using polyurethane as my molding agent and in my mind I figure there has to be an optimum placement of such holes in order to get a proper fill. Any insight you could offer would be helpful. Many thanks. Keep up the good work.

[@CADCAMTUTORIALBYMAHTABALAM]

i will try to cover maximum number of topics in mold designs, wait for future tutorials,

[@linasan9582]

very interesting thank you

[@harshadkondalkar1502]

Is it the most preferrable method used by the designer are using in companies?

[@mohammadzarei3494]

great

[@babarsayyed4292]

Plz tell about difficult shape cavity

[@xmenxwk]

good tutorial and actual tutorial starts at 10:00

[@ankit_ki_baat]

Why not using parting line and split tools

[@santoshponnu4142]

Please make video multiple side core with mold assembly in soildworks thanks in advance

[@harshdhiman7924]

sir when to use this method and tooling split method?

[@jeromesekar7594]

sir if i have cavity and core is it possible to bring the middle part?

[@TheDEVANROBERTS]

Great video, I'm having an issue though, when I try and delete the cavity body to just keep the core - I select convert entities and extruded cut, i make sure 'through all' is selected but when i click okay it does not give me the option to keep bodies instead it extrude cuts the cavity and the rest of the cavity still remains. Am i missing a step?

[@muhamadhaslam8848]

yeah bro...I also face the same problem

[@smalik314]

Thanku so much sir

[@vdope1520]

How to make a casing of the pump..?? Plz make it..!!

[@CADCAMTUTORIALBYMAHTABALAM]

i will try,

[@siddaroodk]

who to make directly in mould construct and parting

[@shahidraza2777]

Hello sir.... Just i want to know , the completion of mold i want to compare between original component and molding component. Can you help me

[@SANTOSHKUMAR-ft6be]

thanks sir

[@arunrajV00]

Hello sir...can you explain how to approach the 2d drawing to draw in 3d modeling...??

[@darshanp498]

Sir, Please do this model using parting line and parting surface method.

[@ppugalia6492]

Where is the injection hole , vents etc ?

[@mas-j262]

i need the inter lock sir and guided pin

[@kumarpritampyare]

What’s name of this course ?

[@simatmakina2963]

thankyou Bro.

[@ravindermahato7919]

How gates and runner is cut

[@jaishantkumar6373]

Dear sir when i going with draft analysis part doesn't saw the colore let me know how it is working

[@bahadursinghrajput2207]

Sir can you provide cad model of 4 flute ball end mill tool

[@vijaykumar-qp4zw]

can help how to get during extrude bodies to keep option not showing in my system

[@amarjitsingh7457]

Sir pls its urgent eh ta Jo ap ne video paayi a starting steps a mould design CH

[@xiaoyouliang9068]

This mold looks unrealistic to me. How do you expect the fluid to be injected into the cavity?

[@bhaskarbr671]

Hi sir i want to learn solidworks electrical please help me sir.

[@technew7900]

can you make mobile back cover mold,,

[@Aravindjk2012]

Bro please explain pattern this drawing after separate in core and cavity ...

[@jalalpilathara6053]

Bro I want to know how to draw runner gate in solid works 2015

[@karthikbj116]

Sir in this video iam not getting body to keep option

[@birudeosalagar3419]

Dear sir I want same explanation in Catia V5, plz sir

[@basantkumar2993]

I didn't found body to keep option

[@mandipdhaduk4335]

How to fix stradle faces??

[@harshadkondalkar1502]

This process is very complicated, Is it possible to make an easier one to get the thing done in less time

[@varunvarundm673]

How to get this software sir

[@KandarpAdroja129]

Its "1 degree" draft bro not 1 mm You kept messing degrees with mm all the time 🤷🏼‍♀️

[@CADCAMTUTORIALBYMAHTABALAM]

Kandarp Adroja Thanks i will take care for future tutorials,

[@KandarpAdroja129]

CAD CAM TUTORIAL your videos are helpful, appreciate it 🙏🏻

[@entertainmentmedia5299]

Sir what is your Facebook page name..?

[@CADCAMTUTORIALBYMAHTABALAM]

CAD CAM Tutorial facebook.com/cadcamtutorial?ref=bookmarks

[@shashinandan3113]

agar fitting line se out of country ka jagah ho to mujhe bhi inform Kari jaega kyunki mujhe bhi mein jaane ka ichuk hun mera contact number hai 83 18 79 24 49

[@matheworman6308]

Can you put it in English... :-)

[@vijaykumar-qp4zw]

doubt at 13.50 minutes

[@mateorengifo]

aprendé inglish bobo ajaja

[@freelectron2029]

you dont slow down and explain what your doing. you just talk as fast as you can and move the mouse around as fast as you can. i cant follow it. your accent is so thick that makes it even harder to understand. just speak slower, explain what you are doing and why and slow down!

[@user-dlekdpf]

all indians are assembled here.

[@sukumarshiva8669]

Thank u sir