Solidworks tutorial | sketch Shock absorber in Solidworks

[@sandhyaprabhu6996]

sir thank you. The way you created spring and female threads of gear in minutes effortlessly is just awesome.

[@ketsune23]

Loved it! I made it and I'm learning so much with you brother. India has many gifted people

[@rih128]

Well presented with very nice verbal audio enhances tutorial. Thank you for not ruining it with music. I like all your presentations as you very carefully elucidate and don't go too fast. Your disclaimer at end is important (as you cannot really make the rods thru machining, and the threads would never work in the real world as no tolerance would bind and lock). Outstanding presentation on how to model.

[@HauNguyen-jr3wy]

Never know this software before, the way you teaching very easy to understand, you are the best teacher,,, thanks👍👍👍👍

[@grahamengley4079]

This worked for me when creating the Helical and Fillet.(Ben Taylor)"I increased the pitch of the thread to 3.25mm instead of 3mm. I was then able to use the 0.75mm fillet. No matter what size fillet I used (even went as low as 0.1mm) It still kept showing the same error message".

[@TrendingCarsChannel]

THX this is what I was looking for.

[@KrishnaPanangipalli]

I've got same error and your suggestion worked, thanks a lot

[@ranjithdsouza8488]

Tenkx

[@Ghost-ro2oy]

I had the same problem and your suggestion solved it. Thank you !

[@NishadAras]

Thank you, as a beginner I was wondering where i kept going wrong even after following the tutorial perfectly.

[@pipinosymmetric]

A true legend in solidworks tutoring.

[@smitititecnosoft]

One of the best solid work tutorial channel on KZbin. Sir million thanks. You are doing great job. 👏👏👏👏

[@ar9iem]

I have seen in the comments that, lot of you have faced issue while constructing the fillet for the thread. You can resolve it by choosing the "face fillet" option instead of " corner fillet ".

[@CADCAMTUTORIALBYMAHTABALAM]

Arnab Mukherjee Thanks :)

[@namandco.3d882]

still failed.. I have tried to put the size of the fillet to 0.1 mm,, still doesnt work. is there anything i did wrong? thank you

[@fawaz8850]

Thanks a ton man

[@codycummings639]

Thank you so much!

[@iam_shashank14]

Thank you sir Very helpful tutorial for me and I am learning to much

[@neildsouza6101]

Keep up the great work. Very well explained! You are the best teacher for solidworks!

[@jaykim3829]

if you don't have 'twist along path' you should find a 'specify twist value' in Profile twist and 'Revolutions' in twist control. I'm using the solidworks 2019

[@lekhrajdewangan8491]

Thank you

[@lekhrajdewangan8491]

Same problem with me b'coz I'm using 2021

[@shinde4426]

Success Design of shock absorber completed 👍

[@user-rc4vm7hj7z]

Thanks for this tutorial with every detail step,good man ，may good luck be with you!

[@noelnakka7901]

ur videos are veryyyyyyyyyyyyy informative of every detailed product.good luck and keep posting new product design.

[@CADCAMTUTORIALBYMAHTABALAM]

thanks

[@bennn1907]

i could not do also the second fillet.i resolved the issue by selecting the fillet type:face fillet, and after that selecting the 2 faces between the edge that must be filleted

[@CADCAMTUTORIALBYMAHTABALAM]

Dan Staver Thanks,

[@designbureau4294]

Thanks man!

[@krushikaneria5541]

Sir can you please make a video on how to make the spring in shock absorber compress and expand .... Learning from your videos is always awesome thanks sir

[@CADCAMTUTORIALBYMAHTABALAM]

sure krushi Kaneria i will try for compression & tension for spring.

[@tubedawg14]

Great Video ! Very instructive in a completely understandable way. Thank you for taking the time to explain this assembly so well.

[@Gameplay_with_Hannes]

best tutorials ever. thank you

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks, & you are the most welcome.

[@yawash77]

Dear Sir, Once again thank you very much for your effort and your time in helping us, please keep up, God bless you! Best wishes to you With Regards

[@CADCAMTUTORIALBYMAHTABALAM]

welcome, please share our videos which is help us to do more and more in Solidworks thanks,

[@MnoobGamer47]

Sir your teaching way is very good👍

[@Pac0Master]

Is there any way to "crush" or fold the spring? or any other object? And I don't mean the stress simulation, I really mean a way to animate objects like a spring to fold or something.

[@engineerdrawing6039]

liked it, i prepare to design it on my channel

[@manuboker1]

Thanks! wonderful SOLIDWORKS instructing videos!

[@siphilipe]

Angle 60 degrees not 60mm. Beside a little speeding, it's just a great video. Thanks!

[@pedroanastasio4996]

I made this project. It was wonderful. I have a question Do you have any tutorial to learn HSMworks or CAMworks? Finally Congratulations, You make nice tutorials.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks soon i will upload CAM works.

[@durgasichandrasekhar6762]

Dear sir I want to document on your project ...Can you share this pdf

[@dionisiobumbaagostinho7275]

Wow, these drawing makes my mouth to watering...

[@MrMetalDrummer96]

i feel you 🤤

[@sunojeevaalo4346]

Hello, sir, you are doing great but there is a problem why are you not providing views of model means if you make any component please provide their dimensions so we can also practise by own.

[@OpenFOAMbasic]

It's the perfect educational material.

[@MrJuniorallano]

SENSACIONAL! MUITO OBRIGADO PROFESSOR.

[@kandasamyrajan]

Thank you for your tutorial. There is a problem. With Under Defined sketch, it is going to features.

[@CADCAMTUTORIALBYMAHTABALAM]

yes its can be features, but better to define all the geometry.

[@sanket3189]

100 likes form my side.....grt work sir

[@CADCAMTUTORIALBYMAHTABALAM]

thanks.

[@AJtheAutomobileEngineer]

Yes

[@pateldevang6198]

Very amazing tutorial sir i really like your tutorial..great work

[@R_Dx_]

I am unable to fillet both the edges because it's saying there's an error in the loop, or it is intersecting. I've checked several time there's no error i made ecactly by following your steps. Still i'm unable to fillet. Help.

[@sudhirkundurthi5150]

Change the pitch as 4mm you will get it 😀

[@attilatoth700]

If you and your PC's pull themselves together then it seems the quite nice work! :) Thanks for uploading! GRT!!!

[@sumitrankhamb4835]

sir plz provide all dimesions of a part at a time so that we can practice well.

[@mbelkadi7936]

i wish i could give you 1 million likes

[@user-pv5yh4de6f]

기계원리가 대단하십니다

[@songsreview2258]

Sir please upload in drawing pdf in your description box, it's very useful for other

[@harshpatel-vo7zd]

can you please show the animation of this shock absorber too?

[@gauravlodaya9479]

Thank you sir for teaching us I Am in sixth standard

[@latsismotorsport9700]

your videos are so helpfull please make more car parts if you can like steering knukle or control arm!!!

[@utkumattaktas7994]

When I apply helix and click normal to there is a little protrusion but yours has no that one . I realize that when I try to place my triangle . It is placed little bit outside of pipe

[@raghavendrasingh2585]

Yes same problem

[@milesmoore5422]

Professor, you need to limit the travel of the shaft and fix the position of the upper and lower shock mounts. The spring should be able to compress.

[@sthephaniavillalongayusti1229]

How can I do that? I need it

[@balkirsimsekkan4412]

good project 👍done it

[@user-qu8gp3gh6c]

Loved it ! but how did u rotate the part using mouse .. please help me on how to rotate parts

[@InventionFort]

really cool 😎, i have already make this but tips i like. you know many ways you can use one commands

[@BillDownhill]

If Solidworks crashes each time you apply the fillet to the thread, you need to increase your Windows GDI limit.

[@kntedge9288]

Great video. Thanks

[@angeldark221]

wow wow wow you're the best

[@MrCaripoio]

pure magic, like it

[@sidduvathar4746]

Thanku very much it is helpful to me

[@hieutran-ex2yt]

very good

[@CADCAMTUTORIALBYMAHTABALAM]

thanks,

[@ivaylokosev8230]

good job sir thanks

[@stephenjackson2663]

Well done. Thanks.

[@pokedexgo]

Great video. thanks alot sir. 🙏❤️

[@thamaraichelvan4590]

Spring Swept not working for 2017 version, what can I do sir??

[@taylorelliott4464]

did u figure it out

[@saw76]

Спасибо за видео, товарищ!

[@NuSEVreaAStie]

U the best bro

[@vanminhtrip]

Very important video thank you,Sir.

[@joeabraham56]

Sir please reply how to do animation for this just now I finished assembly it came very well ✌ thanks a lot for u sir please say how to do animation for this. Waiting for your reply sir 🙏🙏🙏

[@Wyndu777]

Good tutorial.

[@abdul-raufahmed6492]

Can't thank you enough..

[@TanmayM.63]

Many people face the issue of not being able to fillet at 13.48 as a certain pop up message appears not executing the command.. Solution to it is: Edit the feature of helix/spiral and change the pitch to 4mm

[@arkabratadas8640]

thanks a lot

[@VictorBorah-Invincible]

Thank you, it helped me..

[@danielmoreira204]

great info

[@Intuchruk]

Thank a lot. 😂

[@iulianmoga9410]

Good job man ! Thank you sir !!!!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks.

[@arsi_fathur]

Nice. can you make some machine that use diesel as a driver? that can help my education here. thanks

[@rahulupadhyay3570]

we can make machine using petrol. can that help your education?

[@durgasichandrasekhar6762]

Sir can u post video on this component by using Siemens na 10 software

[@pavanpardeep6988]

Sir the dimensions u selected are standard dimensions or not..?

[@wisdom_wellness365]

Very nice!

[@higorsezimbra8443]

amazing

[@user-dq8sl9pe2e]

很不错，学习了。

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@DesainCAD]

Nice ! Good jobs

[@as.g.1655]

Good Work pal!

[@dudsonu44]

awesome

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks.

[@mydreams299]

Great, thank you.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks.

[@lambsauce5445]

Can you please create and model that is proper and working within Solidworks?

[@vishvajeetmohite8162]

thanks a lot❤️

[@Advantages-of-everythings]

thanks

[@kalyaninadipalli1]

Sir for any spring damper design firstly what we will fix damper dimensions or spring dimensions?

[@AJtheAutomobileEngineer]

Nice

[@jaishantkumar6373]

Hello sir i trying to pierce in part 2 for triangle for swept cut... in pierce mid point not pierce .... please help me for learning that

[@tomsellout9576]

jaishant kumar same issue here

[@gasgoldfx]

Sir, how to combine triangle into helix/spiral? I'm very confused help me please, i use solidwork 2017

[@KumarHemjeet]

use pierce option.

[@zedlepplin9450]

great tutorial, thank you sir!

[@easycadtutorial990]

nice i like it i am create this in PTC Creo 3.0

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks, All the best,

[@easycadtutorial990]

I am complete part you see in my Instagram page instagram.com/easycad772/

[@easycadtutorial990]

sir plz subscribe my channel kzbin.info/door/vpsRjojFyRR8jbG5RGLv3w

[@Malim295]

Please how can I make the metal shiny

[@glorytojesus1606]

Sir your tutorial is best but I'm not getting that polished aluminum view it's only showing tree that it's applied is there any command to see applied metal view like catia has shading with material view

[@khaledsaad2602]

Thank you.good jobb

[@Leo-fg9uq]

great work, your videos are fantastic, greetings from Argentina!

[@harsha4589]

when cutting the top edge of the spring using extruded cut (18:00), how did you select the reference geometry or which point did u take as the reference point . When I select the top plane it appears at the center whereas in your tutorial I can see that it appears at the top . Would be really helpful if you could guide me thnks

[@blblblblblblblblbl1287]

how did u fix it? same shit

[@karunar4325]

Sakthi Engineering karunakaran Chennai Nazarathpet

[@CADTUTORIALmax]

good tutorial

[@owahidulislam9255]

Thank you sir..

[@EnricoDellaVolpeTechnology]

great tutorial, thanks bro

[@ecotools3301]

many thanks

[@ravisaxena7024]

❤️amazing

[@codycummings639]

Its giving me an error when I try to fillet the top side of the thread on the top rod. Any ideas? bottom line works fine, top one says it is self-intersecting

[@Newbport849]

Thanks big homie.

[@trienbui9582]

thanks you sir, professor.

[@akhtars4346]

u r great..

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks.

[@ainguyen7350]

excuse me,sir. is that this absorber the same as absorber which used in washing machine (Washing Machine Shock Absorber)?

[@yersonherrera1210]

y como se pondría tope ala tuerca para q no siga subiendo ?