SOLIDWORKS: Using Knit Feature for Surface Modeling

  Рет қаралды 20,668

Hawk Ridge Systems

Hawk Ridge Systems

Күн бұрын

Пікірлер: 12
@usmanakmal4267
@usmanakmal4267 3 жыл бұрын
Thank you for sharing knowledge I always wait for your videos
@jacobames8768
@jacobames8768 3 жыл бұрын
Thanks Ejaz, I appreciate it! If you have any requests for specific videos I'd love to hear them!
@Auday365
@Auday365 3 жыл бұрын
Great video, thank you. - Knit solid body to generate a surface body is helpful to quickly generate a surface out of a solid. - Radiate then knit is also another nice approach to have a surface body.
@kemizehabib-mohammed8791
@kemizehabib-mohammed8791 2 жыл бұрын
This was great, and very helpful.
@kandasamyrajan
@kandasamyrajan 3 жыл бұрын
Thanks for the excellent video. I wish to know whether it is possible to upload the part file. Just to practice because I have many issues in gap control.
@jacobames8768
@jacobames8768 3 жыл бұрын
Hi Rajan, I've uploaded the original surface model of the Shifter Handle to Google Drive so that you can download and work with it: drive.google.com/file/d/1Dbhl4WBdefz7vhub6hEQymnPxU3ojxiB/view?usp=sharing This is the very beginning version with the gaps, so you'll want to follow the steps I've outlined in the video to get it to work properly. I hope this helps!
@kandasamyrajan
@kandasamyrajan 3 жыл бұрын
@@jacobames8768 Thanks for uploading the file and following guidance.
@alexandrosbasios1096
@alexandrosbasios1096 7 ай бұрын
hi! great video ! may i ask ,when you knit is it a problem to see many small blue triangles ,when you press the body?
@alializadeh8195
@alializadeh8195 3 жыл бұрын
Thanx
@artempeshkov7489
@artempeshkov7489 3 жыл бұрын
What you’d say if compare offset from the surface with zero vs knit surface tool?
@jacobames8768
@jacobames8768 3 жыл бұрын
Hi Artem, that's a great question. There's a considerable amount of overlap between those two tools in the context you're describing, and in many cases they can accomplish the same thing. The main difference in your situation is that Offset Surface can be used on individual faces of surface bodies to offset/copy them, while Knit Surface must be used on entire bodies and cannot be used on individual faces. Keep in mind that what you're describing is a different use case for the Knit command and isn't something that is shown in this video. I hope this helps!
@betinhocr
@betinhocr Жыл бұрын
pena que a maioria é tudo em ingles. hihi
SOLIDWORKS Tutorial - Surfacing for SolidModeling
40:16
GoEngineer
Рет қаралды 44 М.
Complex Table Desing in SolidWorks - (Step-by-Step)
18:08
SolidWorks With Aryan Fallahi
Рет қаралды 46 М.
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН
24 Часа в БОУЛИНГЕ !
27:03
A4
Рет қаралды 7 МЛН
pixel art only
6:54
mark playz
Рет қаралды 3
Solidworks: Rundown on the Boundary Surface Feature
19:30
Andrew Jackson | AJ Design Studio LTD
Рет қаралды 10 М.
Advanced Surface Modeling - SolidWorks
21:21
3D World
Рет қаралды 47 М.
Weird Faces: A beginner's guide to surface modeling in SolidWorks
15:10
Forge Product Development LLC
Рет қаралды 33 М.
Designing Consumer Products Using SolidWorks
35:14
Cadtek Systems - SolidWorks Elite Training and Support
Рет қаралды 333 М.
Solidworks Tutorial: Surface modelling a nose cone/domed surface
14:25
Andrew Jackson | AJ Design Studio LTD
Рет қаралды 46 М.
blending surfaces in solidworks
22:23
John Ford
Рет қаралды 62 М.
10 tips for Fusion 360 that I wish someone told me sooner.
12:32
Austin Shaner
Рет қаралды 432 М.
Hard Surface Modeling in Blender is EASY Once You Learn THIS!
27:32
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН