Solve Intricate Die Cutting Mysteries you are Experiencing

[@Csoery]

Massive thanks for this vid from 2021! I was literally on the brink of returning my new BigShot. I've been using it without an issue with frame dies for a few days, but when I got these intricate corner dies (very simialr to what you show in the video) they just wouldn't cut through in the middle of the design. I thought either the machine or the die was faulty! I even tried various quality papers, no luck. A bit of extra cardstock layer on top solved the problem perfectly - the shapes just pop out of the dies without effort. Cannot thank you enough. This vide should be on top of every cardmaking search list!!!!

[@naplesvacation6116]

Wower, game changer. I am a new crafter and really struggled with an intricate die that did not work. I was very frustrated. Thank yo so much.

[@heartfeltcreations]

Yay, so happy this helped you! Thank you for being part of our crafting family!

[@gailhastings7090]

I saw recently a Lady used bubble wrap under her paper, then put through machine, honestly you will be amazed... it will cut out everytime!.. Love your helpful hints everytime!, Thank you for sharing...Gail Hastings Sydney Australia..xx

[@cmhorton]

I try everything you mentioned with similar success. I have one tip that I found that works, too. After the die is almost cut all the way through, I turn it over and add the rubber embossing mat without any shims, and run it through. I almost always finishes the job.

[@heartfeltcreations]

Thank you for that tip Carol:)

[@marionward5958]

I have loads of dies but have had problems with them not cutting properly. Will definitely try the paper shims. Many thanks

[@almalmaish9757]

Thank you for using the elegant ovals and the companion dies. i wasn't sure how to use them together and now I have some inspirations to create more beautiful cards. Love HFC!

[@bridget22868]

Awesome video, this is very helpful. Most people don't realize that they can add a paper shim on top of the die to help the die cutting machine add more pressure. That they don't NEED to have the metal shim. I just love watching your videos they are so helpful when using your stamps and dies. What I like mostly is that you show us how to manipulate the paper when making the flowers to make them look more real. I get more compliments than ever before on my cards, now that Ive adopted your techniques when making my flowers etc.. My friend Sue and I got to meet and take a picture with you at the convention this April in Collinsville IL. And you showed us how you make your poppy flowers. It was great to see first hand your technique on making them. You told us that your home store was about 5 1/2 hours from there, and I think we are going to take a road trip and come visit your store this summer sometime. Keep the awesome products coming. I can't wait to see what's new for next year!!!!

[@tanyawilliams4978]

Thank you for this video. My dies were not cutting out properly and as a newbie I thought it was me. I did not know about shims. Problem solved.

[@imacraftysoul]

Thanks for this video Emma Lou. I've always used shims and waxed paper with my intricate dies but have struggled with those small areas that just don't quite seem to make it. I never thought about using just a small shim in the trouble area to help with that. Appreciate the tips! That oval die is so gorgeous!

[@heartfeltcreations]

+Patricia Bowman So glad this was helpful for you Patricia:) Take care~Emma Lou

[@cathyperry660]

I never thought to add a shim in the area that is not cutting well. Thank you! I’m just getting back to manuel die cutting after using the Cricut for so long. Your hints were very helpful!

[@seamlesscreations]

thank you so much! I was just about to throw this die out of the window! Worked a treat. Why on earth didn't I think of this?! xx

[@charlawillson5654]

Love your hair!!! Love your helpful tips. Thank you

[@mostlyautum]

I've just begun my die cutting/crafting journey and within days came across the problems you discussed. To say I was ready to chuck it all in would be an understatement. Watched your video and an raring to give it another go. Thanks for your great content and easy explanation.

[@patcontant9284]

Thank you for the tips! Im so happy I found you. I was becoming quite agitated by dies that weren't working. TFS!🤗

[@heartfeltcreations]

Hi pat, yay, that can be so frustrating, so happy this is working for you:) Happy Crafting!

[@patsymilne7667]

thank you so much I have a beautiful intricate die that just won't cut very well so now with your help I can keep using it instead of throwing it out thanks for your help again.

[@paulafrancis6404]

Just want to let you know that this video is so informative. I’ve tried this method with my Sizzix machine and it worked perfectly. I was about to give the die cut a negative review but this video saved me from doing it. Lol. Thank you!!!! Thank you!!!

[@dbkejonz339]

This is a fab idea I have throwed so much diecutting away due to this problem will definitely use this idea now thanks

[@bridget22868]

Thanks for sharing this video with us. I love ❤️ Heartflet Creations products. And the molds you’ve come out with for shaping the flowers act,, are fantastic. It really helps make my flowers more beautiful. Thanks so much.

[@5555GranD]

I love this new die! The "stitched" detail isn't visible until the last closeup of the oval option. I am a seamstress as well as a scrapbooker, so I love the opportunity to "merge" these skills!

[@heartfeltcreations]

+Darlene Bruehl Hi Darlene, Thanks for your feedback:) The stitched detail is adorable isn't it! Take care~Emma Lou

[@spiderals1]

Darlene Bruehl same here, I'm an avid embroider and the stitched borders just pop and make me happy. I never thought about the fact that I love all things sewing and can't get enough of that effect in my paper crafts

[@christinewesthead3260]

Thank you so much for this. I was putting my shim in the wrong place but after watching your video, I tried it again and it works!

[@heartfeltcreations]

Yay, so happy this works for you....have fun die cutting again:)

[@antm64]

I so appreciate all the suggestions and tips you have given us in this video. I have a doily die that looks beautiful, but I can't get the center to cut. I'll be giving it another try later today. it's so nice to have 2 different die sets that are designed to coordinate together, each a compliment to the other. More creative opportunities! Thanks for taking the time to make these instructional videos. Much appreciated!

[@heartfeltcreations]

+Martie Rollin Thank you Martie, So glad this was helpful for you and hopefully that helps with the die you're having issues with. Take Care~Emma Lou

[@babskara3911]

Your videos are very interesting and knowledgeable. I found also if you slightly spritz the card stock before putting thru machine it always cuts first time!

[@dorothymutafopulos7460]

Thanks for coming up with the oval die it truly complements the 1st one you came out with. I also turn my dies in the machine this helps with cutting those detailed dies. Thanks!!!!!

[@heartfeltcreations]

+Dorothy Mutafopulos Hi Dorothy, Thanks for the additional tip....totally missed mentioning that:) Have fun with the new oval die...releasing in 1 day:) Take care~Emma Lou

[@avrilcrisp5725]

I find using my EK powder tool over the die really helps with releasing the paper from the die, and it's cheaper than wax paper. It works really well on intricate dies.

[@heartfeltcreations]

That is a great tip, thank you for sharing!

[@carolinejones7273]

Thank you so much for making this video I've been trying to make a gate fold card for my friends wedding with one of my intricate dies but have been having trouble getting the middle to cut properly after watching your video I tried your layering you showed and it worked thanks so much again

[@prettyblimp]

thanks Emma Lou, having exactly those problems you described..I'm a beginner die cutter although have been making cards for some years now. I was given an electric cut n boss last Christmas and tonight have been attempting die cutting! I am good to go now! cheers

[@heartfeltcreations]

Yay, so happy those tips helped you! Have fun with your diecutting:) ~Emma Lou

[@gavin05100]

Thank you because i have the same corner die and I don't use it much because it's so hard to cut. I did use a shim but on the outside of the plate. I'll try the shim on the inside right above the die and see how that works for me. Thank you so much for sharing!

[@lisaduggin8433]

Great tips. One thing I do if I have just a small area of the die that did not cut is to put a piece of tape right over that part of the die. It helps a lot.

[@heartfeltcreations]

+Lisa Duggin Thanks for the extra tip Lise, so helpful:) Take care~Emma Lou

[@RobertaSharpe]

Thanks for the video on using intricate dies. I knew about the pressure points of certain die cut machines, but didn't realize that such a thin sheet of paper would be so helpful. Looking forward to that die release. Thanks again.

[@heartfeltcreations]

+Roberta Sharpe Hi Roberta, You're very welcome:) Have fun using these techniques! Take care~Emma Lou

[@fluffyspit]

Thank you so much! We were having so much trouble with this exact problem...we were definately bad workmen blaming our tools...now...woohoo...nice clean cuts...thank you.

[@ChatsburyGirl]

Thanks for posting this video. I had this very problem this week with one of the dies in the Raindrops on Roses set. I tried it several times, but it just wouldn't work. I tried the other die in the set, and it worked beautifully. I have gone back tonight after watching your video, and after experimenting with shims, I finally got it to work. I'm waiting patiently for the craft shop to get your new oval die in, can't wait to have a play with it. Thank you Penny (Canberra Australia)

[@karenbrauneis4290]

Thanks for this video. You explained the problem perfectly and showed excellent solutions for making our dies work better. It always frustrates me when I see a beautiful die being bashed by a reviewer that just doesn't know how to make these intricate dies work. I have also seen reviews by people that are trying to use very old die cutting machines that were simply not designed to work with these intricate dies. Sometimes it's time to purchase a new machine. Thanks for thinking ahead and making a companion oval die set. I can't wait for it to hit the market.

[@heartfeltcreations]

+Karen Brauneis Hi Karen, You are very welcome! Thank you for watching~Emma Lou

[@nancyculhanehoag7936]

I haven't worked with my wafer die again sense that last two days with them! Your u-tube suggestion i think will do the trick. It's just what you said it doesn't cut the center so I'm going to try your shims! Thanks so much for getting back with me! I'll give you an update when the wafer dies and I are up for a workout! Lol. Have a great day! Thanks again for helping! Nancy

[@heartfeltcreations]

Yay, happy dance, you are one persistent gal....so happy these tips worked for you:) ~Emma Lou

[@donnahelzer8381]

Oh my! I just found you! Thank you and I will be back!

[@leidyortiz8417]

Thank you for your help.I have this butterfly die cut that's make me crazy

[@nancyculhanehoag7936]

Yesterday I had a whole day with a problem with a new die! I now have 3 bruised toes because my magnetic platform fell on my toes! Damaged a metal shim, went threw many stacks of papers, non I might say was any good! I was determined that it wasn't going to win! Love the die but It gave me so much trouble! It would cut threw the edges but not the center, it cut all the way threw, and thing that could happen did! Thank you for your input, I'm off to give it a try. I will WIN!!! lol Thanks for your suggestions!

[@heartfeltcreations]

Hey Nancy, So sorry you were having issues with diecutting! How did these techniques work for you? ~Emma Lou

[@almacasiano]

Emma Lou you always have such wonderful tips and hints I'm not sure how I'd be doing with your help !! thanks so much !!!

[@heartfeltcreations]

+Alma Casiano Hi Alma, You are so very welcome! What tip was helpful for you on this video? ~Emma Lou

[@CarolHeld]

EmmaLou Your clothing choices are amazing.....cards too...hahaha Wow, I really watch for what you are wearing to set my pace for the day.....huge smiles Fashionable clothes make fashionable cards....teehee

[@heartfeltcreations]

+Carol Held Thank you Carol! ~Emma Lou

[@victoriaciolek9585]

Thank you Emma Lou for the advice and showing such beautiful cards. I find (this is just my opinion) that using a Metal Adaptor Plate helps me immensely when cutting out intricate dies. I have all the die cut machines except the Vagabond and a few others, but I have the New Spellbinders Platinum, The Big Shot, Cuttlebug, The Grand Calibur and 2 more... I guess it is time to get rid of all of them but 2 huh? lol but anyway, the metal adaptor die works perfect at least for me. I have seen many video's that tell us that wax paper will ruin our dies, so I don't do that anymore...but this is just my opinion...THANK YOU Emma Lou...

[@brendawoodcock2622]

If you run a tumbler dryer sheet through your machine with your dies in embossing mode before using them the paper then comes away easily when you do. You may need to repeat this after a few uses because paper dust builds up on the dies again. You can keep re-using the dryer sheets over and over..it gives a thin layer of silicone to your dies. No need for wax sheets etc.

[@heartfeltcreations]

Thank you Brenda, this is a wonderful tip:) ~Emma Lou

[@nancyculhanehoag7936]

Thanks for asking how I have progressed with my wafer die cut outs! I haven't conquered them yet, but I don't plan on giving up either! Your suggestion were very helpful! I'm still having problems with the die cutting out the lines around the square and not in the center. Maybe it would help if I told you that I'm working on the wave die. It's such a pretty die. I finally ended up cutting the centers out by hand. The card turned out pretty! I have a whole lot of pieces that I actually used for sea weed on another card! Lol. You know the old saying! Some of your best work comes from mistakes that you found useful while covering up your bobo's! ! So in answer to your question, no I haven't conquered my problem, but I set a side the problem, till I'm ready to dive in again!!! I must say you have really been a big help understanding why there was a problem in the first place! Thanks for very much!!! Nancy

[@heartfeltcreations]

Hi Nancy, You're awesome:) I love how you persist and don't give up:) Hey, if it would be helpful, snap some photos of the problem areas and email them to [e-mail] and we can help troubleshoot. ~Emma Lou

[@nancyculhanehoag7936]

Just wanted to give you an update! I DID IT!!!! I mastered the die, thanks to you! There was something in you u-tube that kept me grinding at me, every time I messed up! I have no clue what it was, maybe the whole u-tube!!! I kept repeating what you had said and I kept on cutting, changing my steps every time it didn't work out! Finally everything came together, and I cut a good one! I now have two successes thanks to you!!! I will be forever grateful for your soft spoken voice and kind words that kept me going! Thank you from the bottom of my heart! Have a great day! Nancy

[@heartfeltcreations]

Yay, happy dance, you are one persistent gal....so happy these tips worked for you:) ~Emma Lou

[@melanier7598]

Your videos are always so informative! I especially appreciate that they are well thought out and everything is clearly explained. Thank you for these great tips on die cutting.

[@heartfeltcreations]

+Melanie R You are so kind Melanie, thank you! Take care~Emma Lou

[@angelahartley3212]

Cindy was so helpful and sweet to forward this video to me! I also think what it really comes down to is I am NOT a big fan of the weight and feel of Kraft cardstock.i would LOVE to see it a smooth cardstock like the white or the black! Just sayin........thank you!

[@lindaanderson7375]

Great suggestions, will give it a try with the die I usually pass over because it frustrates me when it doesn't cut cleanly.

[@dvcrztb]

I want to get the oval dies. So pretty! I find that using waxed paper leaves a waxy film that comes off on your paper. I got the metal shim for intricate dies and it works beautifully.

[@candacekieper4354]

Doris Cote do you use it in pllace of thin die adapter?

[@chrismayer5000]

Thank you SO much for this tip. I have been very frustrated with some of my dies and I know that my crafting time will be more satisfying now. Blessings!

[@joycealcorn5175]

I really enjoyed these tips. I had almost quit using my dies. Now, I will try again. THANKS!!

[@chasejefferson2022]

instablaster.

[@carolynrohrmann1387]

A PS to Doris regarding wax paper making her dies waxed........I saw a video by a man on KZbin to use a plastic bags from the newspaper or grocery store.............hope this helps......from Coye in Arizona

[@djtipton50]

Thank you for helping me understand how to gently shim the problem areas.I guess you've seen that we're no longer encouraged to use waxed paper with dies.

[@evaramirez3809]

Thank you so much!!! I just bought some and was frustrated that I could not get it cut out well.

[@audvinsand]

I have had some difficoulties with some dies, aspecialy if the die(s) have a lot of details.. I have actually bout a metalplate, (from Scrappiness, in Norway), that helps with that. With that metalplate i don’t have to use more shimmer to it, like ever. I love my metalplate😁❤️ Thanks so much for this video anyway🥰

[@DonnaJo3452]

Thanks for the tips. I've used them n they worked great. I too give my dies a little turn n that helps. I love the Tool n One n it does a great job removing the bits.

[@carolyncormier8402]

Thank you for the tips on intricate dies. I will give them a try.

[@lescridland]

very informative and you explained carefully and slowly. thank you.

[@heartfeltcreations]

Thank you Les - Happy Diecutting:) ~Emma Lou

[@ruthjohnston1162]

Thank you. I’m off to “shim” my troublesome die! Ruth

[@nancywaligorski1015]

Thank you so much because I was about to give up on one of my dies. I love these products and now instructions too. Woo hoo.

[@myrnahartley8710]

it helped to know what to do with those middle problems, thanks. I use some foam as a shim and it helps too.

[@carolynrohrmann1387]

I am new to die cutting and the oval will be my first purchase. You did an excellent demo for me a new comer.The items on the back wall are wonderful! How can I learn about the violin and the gazebo? I have about $400.00 dollars in my shopping cart, so you can tell I am excited too learn fron people like you.I don't know enough to to even open my Circut or die cutter. Thank you so much.Coye

[@heartfeltcreations]

+Carolyn Rohrmann Hi Carolyn, You are awesome and I'm so excited for you to learn new things. Here is a link to the gazebo project: www.heartfeltcreations.us/gallery/?project=7414&view=alteredart&section=&search=&page=5&totalRecords=1286 and the violin: www.heartfeltcreations.us/gallery/?project=7389&view=alteredart&section=&search=&page=5&totalRecords=1286 if you click on the link and have more specifc questions, you can click on the designer name in the project instructions and that will take you to their blogs where you can ask them more detailed questions and they will be happy to help you!

[@sharon94503]

For smaller dies, I use the SIZZIX SIDEKICK 2.5" x 5" cutting plates in my Big Kick...the BEST $3.99 @ Hobby Lobby I have spent yet!

[@countrysilkwormers28]

Thank you for sharing these techniques, it was very helpful

[@asp9990]

Thank you for the advice on detailed dies. My die wouldn't cut in the middle and took several attempts even with your advice, it nearly got flung across the room. I'm still struggling but will fight on lol👩

[@heartfeltcreations]

Ah, it's no fun to be in a fight with a die! Crafting is supposed to be fun and stress free. You are so persistant, love it....if you need additional help, we would love to help you figure it out, you can connect with us at [phone]. ~Emma Lou

[@marlajowens]

Thank you for sharing those techniques Emma Lou. May I also suggest rotating your die in your machine. Rotating it 90 degrees helps to get a better cut.. The Precision Base Plate by Sizzix is a must have for all of those intricate dies. It is made for the Sizzix Big Shot, Big Shot Plus and your Vagabond. They are pretty inexpensive. Have a blessed day!

[@heartfeltcreations]

+Marla Owens Thanks for that suggestion Marla, very helpful! Take Care~Emma Lou

[@chrisarlington1792]

I don't like the precision plate because it damages your dies. This video gives a healthier method. Iam happy about the thinnness of the shims

[@godsblessings1073]

Have you tried using the Precision Base Plate? I find it really helps with die cutting. By the way I really love how beautiful your dies are!!! They are so intricate. Your styles are just what I love. A little out of my price range, but I try to buy one at a time because they are soooo pretty and almost alive.

[@elsieblakley2381]

I thought that was very delicate and beautiful!

[@msfran3]

Thanks for this video. I am pretty new to die cutting and your clear explanation will guide me when I am playing with some of my more intricate dies. Hugz, Anne

[@heartfeltcreations]

+Anne Elder Hi Anne, So glad this was helpful for you and please let me know if you have any questions. ~Emma Lou

[@GWest5068]

Thank you so much for sharing this with us...I do have some small intricate dies and I just don't use them because of the problems...will be trying this for sure...love your dies too...I also share this video on my FB....

[@heartfeltcreations]

+Gloria Westerman Yay, so glad this was helpful for you Gloria. Take care~Emma Lou

[@jilliandickson680]

thank you so much. I have been having these problems, now I can go and give your way a go!!!

[@heartfeltcreations]

+Jillian Dickson Yay, so glad this was helpful for you Jillian. Take care~Emma Lou

[@joycepierson5616]

Happy Thanksgiving to you and your beautiful family. Thank you so much for this video with the Decorative Oval and the Eyelet Oval dies. They are so gorgeous!

[@heartfeltcreations]

+Joyce Pierson Thank you Joyce! Happy Thanksgiving to you and your family:) ~Emma Lou

[@DeborahAdamsCreativeLife]

great tutorial Emma. I use the same techniques that you showed. looking forward to the new Oval die that coordinates with the Decorative Oval. :D

[@heartfeltcreations]

+Deborah Adams Hi Deborah, yay! I too can't wait for that new oval die:) Take Care~Emma Lou

[@joycegillepie9707]

Thank you for all your information on dies. I have had many troubles with some of my dies Joyce

[@heartfeltcreations]

+Joyce Gillepie So glad this was helpful for you. Take care~Emma Lou

[@erniehenderson562]

Thank you. I am new to die cutting. You helped explain my problem.

[@dorothycotie108]

I found your video to be very helpful! Thanks so much for sharing!

[@jonieisenberg7296]

When I have a problem with intricate dies, I use a Bounty paper towel usually folded in half. That seems to give the proper cushion. I have inserted a dryer sheet also to catch the small bits. Some of my friend were using text wt paper instead of the paper towels. That did not work. I normally use my Cuttlebug, even though I have an Evolution and Grand Calibur. I also have the Cricut and am probably the only person in the world who does not enjoy it. I would very much like someone to have it that would love it. I have crafted all my life, but of course could not afford the best products until several years ago. I started with Anna Griffin and I still love her products. I feel I need to branch out and get a less expensive line. When I saw HEARTFELT CREATIONS I was sold. Not a less expensive choice. Maybe I'm a crafting tool Snob, but I want the best and try not to settle for less. I will continue to watch your tutorials. Please tell me when you are exhausted from my posts, as I am a passionate crafter who thinks things should be done properly. I am also alone all day, so sometimes my brain kicks into creative overdrive and I tend to share too much. Thanks for your great tutorials and I will be starting my Christmas flower making with you about Wednesday if all items arrive in a timely manner. Thanks again for sharing your knowledge. Jonie

[@annsurtees6011]

thank you for solving the problem I had with my dies,

[@SnelSan]

Please make a video on the gorgeous things that are behind you on the shelves! I love the lanterns! Are they in your collection?

[@heartfeltcreations]

Hi Sandra, Thank you for your suggestion! The cream lantern was a painted thrift store find and the one with the poppies was cut from a SVG file.

[@ccrusannoble]

Very helpful. And I love the new companion die. Can't wait to get it in my hot little hands. :)have a blessed day.

[@heartfeltcreations]

+Cynthia Crusan-Noble Thank you Cynthia! I like the phrase hot little hands:) Take care~Emma Lou

[@tommieelliott2194]

Really liked the information. Thanks

[@aprilsodoski4696]

using the precision base plate from sizzix works great for intricate dies with my big shot plus

[@sheilaj6713]

This has been a great learning tool for me. Really enjoy all of your youtubes. Sheila

[@heartfeltcreations]

+Sheila J Thank you for watching Sheila and have fun using your intricate dies! Take care~Emma Lou

[@jeannieherrer9323]

Thank you...love your designs. So beautiful. The tips are really good to know. Thanks for sharing.❤

[@dorisbrennan4559]

Thanks for the help to solve some of my frustrations.

[@chrisarlington1792]

I really like your video and wish there were more like this. I notice you like your dies face down cutting side. I think it's more efficient. Do you emboss your dies too after die cut?

[@heartfeltcreations]

Sometimes, it depends on the die design.

[@brendaduval3403]

Thank you for the tips! I was beginning to ask the same questions this was very helpful!

[@sewpink3998]

Thank you so much. I am new to this and this tutorial was a great help.

[@lindazabel5925]

Very helpful!! I am one of the "flingers"...lol you saved me!!

[@jjohnson1655]

Wow! Very helpful!

[@chrisarlington1792]

I use a Crossover machine it is 20 years old. I rarely have an issue. I like to put my dies face down so I can see where on the paper I'm using but the instructions say die, then paper. I don't want to cut my base plate. Would the die get hurt if I put the metal plate under the cutting side?

[@heartfeltcreations]

Hey Chris, if it's a metal plate for precision die cutting, it won't hurt the die.

[@lyndaW73]

Thank you for the extra help with the die cutting.

[@junedavidson2442]

I think all you done was very helpful as I am only start out

[@fernladeroute3675]

Love your products and tutorials

[@jonieisenberg7296]

I have enjoyed watching your tutorials for the past few weeks/months. I have had a cast on my leg so maybe that what a sign for me to learn something new. I decided last night that I deserved the HEARTFELT CREATIONS STARTER KIT and I chose the Poinsettia stamps and dies. (2 sets...couldn't decide) I am so excited to get the supplies so I can sit and make my Christmas flowers. I am almost old enough to be retired but my back decided it was time for me to stop work and do the crafts that I really love. Even at work I was a graphic designer but I would like to create for me and not someone else. I notice you have the Vagabond. I have thought about purchase for a while. Since the new Vagabond came out I pretty much made up my mind. Do you enjoy your Vagabond?

[@robynjacobson7760]

Wondering why people spritz with water the paper before die cutting😅 my card stock gets warped.

[@vanbridge7232]

Lovely be the calm presentation

[@ericlauretscraptendance]

I bought the decorative blossom corner some years ago and I was upset because the dies didn't work well... I threw it and now I regret seeing how we can work with it... 😭😱😭

[@yvonnewey]

Very helpful thank you👍❣️

[@inawhelan4565]

Thank you that is very interesting, I certainly will do that in future.

[@pooch5539]

I sure did like all your ideas very nice.

[@lindamarker9534]

Thank you. The video helped me. You mentioned using wax paper but I was not sure how. That would be helpful.

[@heartfeltcreations]

Hey Linda, i add the wax paper in between the die blade and the cardstock, you can also see that demoed on this video: kzbin.info/www/bejne/kKbYmXqdo8ameqM. Thank you for being part of our crafting family. ~Emma Lou

[@candacekieper4354]

Linda Marker you can use plastic bag from grocery store and it doesnt rub off on die or cardstock

[@fernladeroute3675]

I have a sizzle machine and they have come out with a precision plate for intricate dies,

[@sylviatilley7324]

Just found you.I will try using extra paper as shim as i have a few die which i am not pleased with.I use 300 gsm card stock.will this technique also cut using just paper shim?Thanks for your tuition x

[@uranastanley1507]

Hey Emma Lou, Do you have a video showing how to put the corners together to make a doily? I watched a demonstrator show it a couple years ago at a Scrapbook Show. I have trouble lining it up as you briefly showed in this video.

[@heartfeltcreations]

+Urana Stanley Hi Urana, Thanks for asking...yes we do: kzbin.info/www/bejne/Zpu8Y2aMa62biZY. Enjoy! ~Emma Lou

[@gigijordan6888]

I solved my intricate die cutting problems with the additon of a Chrome Precision Base Plate [by Sizzix--fits any standard Big Shot or similar die cutting machine]. Makes die cutting a breeze.

[@ThePennyArcade]

You know how dies have those little holes/circles in them? Is there a way to prevent it from making an imprint on my paper?