Some propellers I use | Micro fpv quads props

[@drony3miasto]

Interesting video, very informing and unique! I have not much experience, but I prefer 3018 over 3016 in 2s toothpick. I recently installed 2 bladed Gemfan 45m on Meteor75 Pro Walksnail and I think in this configuration it is a great drone for outdoors. I'm waitjng for the spring to confirm it but indoor (hall) flights are very promising. The only drawback is noticeable vibrations when adding throttle but maybe I can tune it in Betaflight. This problem may not be there at all on analog or may be unnoticeable. For 40mm whoops I prefer 2 bladed props. For 31/35mm indoor racing I don't know yet, have to test it.

[@TargetFPV]

Thanks! It helped me a lot to read Oscar Liang's writings and tests! A real treasure! Yes usually a 2-blade prop is more effective and faster to fly, especially with a toothpick. But that's why it's good to try several propellers, because they are relatively cheap and can make the quad fly better. Of course, everyone swears by a different prop. For me, the worst is when the propeller flies off the shaft (which is not screwed down). I used the 45mm biblade for a long time and it is really good! The vibration may be from spinning the engine at higher rpm with a 2-blade prop and falling out of the filtering range (then I may be writing nonsense :). Or TPA may need to be varied. But nowadays I just put a uav-tech preset on the quad and 90% of the time it's fine. The other 10% I have to fiddle with. 😃

[@drony3miasto]

@TargetFPV Thanks for reply. I think you are right about 45mm biblade shakes. I use original Betafpv Meteor 75pro now, changing it to default UAV Tech's and/or incerasing filtering can help. I will try it!

[@Dolphinrc]

Hello，Are you interested in using and testing our FPV products? Thank you!

[@TargetFPV]

Thank you for your enquiry! I'm not looking for new FPV products at the moment, as I'm already testing my own purchases to find the right equipment for me. I wish you all the best for your future projects!

[@Dolphinrc]

@@TargetFPV Thank you so much! Have a good day.