Something You Probably Didn't Know About The Basic Sigma Metalytics PMV!!

[@SilverOceans]

Sigmas are great for bullion, but nothing besides specific gravity tests (which damages the coin) is better than a scale in combination with calipers. That’s old school, but it works well. It should also be noted if you’re going to do a specific gravity test, use distilled water. Great video! 🔥🦈🌊

[@S.G.T.Stacking]

Great point Oceans on using distilled water next time. Thank you very much for the advice! I appreciate your input my friend!

[@walterford5875]

I don't believe a specific gravity test would not damage the coin, as long as the water in inert.

[@keithknechg3217]

Agreed,distilled water.except for culls and circs.but why not?

[@debbie-silvertrap5898]

Very informative video SGT. Thanks for putting it out there!

[@S.G.T.Stacking]

No problem Ma'am, just trying to do my part to share some info. I appreciate the kind words! Hope you and the hubs had a great 4th of July!

[@bigapplestacker6911]

Thank you for the information.

[@S.G.T.Stacking]

I appreciate the feedback brother! Hope you had an awesome 4th of July out in NY! I'm sure you did though, NY knows how to party! 🎆🇺🇲💪👊

[@TMYJones]

I discovered the same thing & I was searching for videos to see if anyone else is having the same issue. I too was able to put a simple 1991 quarter & it passed. False positive! Thanks!

[@S.G.T.Stacking]

No problem, glad to know others are noticing this too. I'm not too worried about finding fake silver half dollars, quarters, or dimes.... it's more so to raise awareness for those just using these to test their Morgan's and Peace Dollars.

[@walterford5875]

The clad composition was designed on purpose to reflect eddy current similarly. This was done to appease casinos, so they didnt have to modify their coin validators as silver coins were going to be phased out.

[@S.G.T.Stacking]

Thank you very much for the informative comment! Make sense for sure!

[@SFStacker]

I caught about half of what you said… tinnitus 😢 Sic Argento Libertas 🧐

[@S.G.T.Stacking]

🤣🤣🤣 I knew I wasn't the only one!!

[@krakentravis7787]

Thank you Sgt for the info, great video brother

[@S.G.T.Stacking]

Thanks brother, I appreciate that! Hope you and Mary had a great 4th!

[@JewelryEnthusiast]

Great video. As a rule, I never accept one single test to validate a coin. Weight, diameter and thickness, then test on the sigma. If there are any flags, a gravity test. Personally, Im not a fan of 90% silver and dont stack any. Recently bought a 1800s gold coin that I couldnt verify on the Sigma. Ended up doing a scratch test to confirm its 22k gold to validate it. Because f that, I wont even deal with old gold anymore.

[@S.G.T.Stacking]

Thank you very much for the feedback! Yeah, I agree, don't just settle for any 1 test to call something good. It's not that hard for scammers to get one thing right on a fake but it's much harder and damn near impossible to get it all right. I personally don't own any old gold, although I would love to get my hands on some pre33! I hear you though, sucks you had to resort to the scratch/acid test.

[@leosilve]

Thank you for sharing this. However, this issue is specific to 90% silver. I’m not a collector. I stack primarily 1 oz gold bars, 1 oz silver eagles, maples and buffalo rounds and bars. For these products there is no problem.

[@S.G.T.Stacking]

That's correct, this is issues only pertains to 90% silver coinage. I have no issues either with gold and silver bullion (.999 or .9999). The main reason I made this video is because I've seen others testing their Morgan's and Peace Dollars with it... just wanted to shed some light on the issue. Thanks for stopping in and for your feedback!

[@NCstacker]

Thanks for sharing the info

[@S.G.T.Stacking]

Thank you very much my friend!

[@cyrix9494]

Good job we all appreciate the video Thanks

[@S.G.T.Stacking]

Thank you very much my friend, I appreciate the feedback!

[@bcfisk]

Specific gravity test is really the only one you need and it's easy and cheap; you just need a scale, a plastic cup, and some string. Just pat dry with a soft cloth if you're worried about damaging the coin. Where the Sigma excels is detecting tungsten-filled gold, as that will pass the specific gravity test but the Sigma will catch it because the conductivity will be different. It's also okay with .999 bullion, but can confuse copper and silver-plated copper with sterling and 90% silver.

[@S.G.T.Stacking]

You have a point, a Sigma can easily be fooled with some of the fakes out there but it's a good thing we have many different tools and cheap ways of testing our Bullion. Thank you very much for your feedback and comment my friend!

[@WorldMoneyWins]

Great advice! I have the Sigma Pro version because of this very issue. If I had it to do over again, I would probably have bought the Pro Mini and saved a bunch of money and been able to access more features through the app.

[@S.G.T.Stacking]

That's great advice on your part too my friend, this will help me greatly, should I decide to upgrade in the near future! Thank you very much for your input!!

[@WorldMoneyWins]

@@S.G.T.Stacking I'll probably put together a video pretty soon about all the testing methods I have also. I wish there was a way to get a free Sigma Pro mini from that company. They're crazy expensive. 🤣

[@S.G.T.Stacking]

@@WorldMoneyWins looking forward to that video! Keep me posted... and I know what you mean lol these things aren't cheap!

[@JosephShaffer-o1o]

Well I bought the the SIGMA LARGE PRO ; Because I buy GOLD , and silver , and it has found 2 fakes , 1986 Morgan’s and saved me 1 time into buying a fake Indian head gold So it has paid for itself already . Worth the first me . Spend $2000.00 on fake gold and it will make you cry 😭

[@WorldMoneyWins]

@@JosephShaffer-o1o yeah, that's the one I have. I found a fake gold bar for a friend of mine that brought all his gold in to my office to check for him. I mainly buy gold also

[@IsraelTorres949]

Thank you for sharing and explaining the gravity test!

[@S.G.T.Stacking]

No problem brother, always happy to share my experiences!

[@EmeraldCoastStacker]

Hopefully a Sigma will be in my Christmas stocking 🙏

[@S.G.T.Stacking]

Lol I'll be happy with a 10 oz silver bar! Lol

[@S.G.T.Stacking]

There you go!! You're going to love it! Congrats my friend!

[@snifferinchief4483]

Community exclusive 👍I've never seen a specific gravity test on precious metals. Lovely Psalm on your logo

[@S.G.T.Stacking]

Thank you very much brother, on both counts!

[@send2georgie_S2G]

This is a brilliant video SGT. I learned a lot. Thanks for sharing. Time for me to dip my silvers LOL 😂

[@S.G.T.Stacking]

Thanks brother, I appreciate the feedback! 😅

[@Grandstaff_Au]

Wow, I never would have guessed that. Very helpful video!

[@S.G.T.Stacking]

Same here, I was pretty disappointed. Glad this video was helpful! Thank you for stopping by my friend! 🇺🇲💪👊

[@silverking8742]

Great video SGT

[@S.G.T.Stacking]

Thanks brother, much appreciated!

[@l.j.silveraustereprivateer4010]

Thanjs for the heads up SGT!

[@S.G.T.Stacking]

You got it brother! Thanks for stopping by!

[@Silverping]

I ran into the same thing and I agree that the ping test is probably quick and best way because of the properties of pure gold/silver unique ping sound. My bullion dealer at OM Bullion showed me how the 90% silver real/fakes can be deceiving with same results on sigma.

[@S.G.T.Stacking]

It's a little disappointing that the basic model cost a good amount yet doesn't have the function to distinguish the difference. Thanks for sharing your experiences!

[@HUMANDATA8]

Hiya S.G.T. BLESSINGS visiting from VENUZ MARTINEZ great work....left my like!✅

[@S.G.T.Stacking]

Thank you very much my friend! You support is much appreciated! 🙏

[@bekacar]

Sigma has 3 modes: 1. Spec. gravity (box on display) 2 electric resistance, 3 conductivity. For example resistance of 99.9 silver is 1.61 X10-6 ohm, 24 k gold 2.3 etc. Impurities in metal will change the number proportionally but not too much.

[@B29p]

Careful carrying a good earth magnet, can cause some issues. Scale yes and exactly, the pinger. Only thing in a shtf for example would be most likely nobody will know due to internet being down. Great examples of testing for purity.

[@S.G.T.Stacking]

Yeah, I forget how a good Earth magnet can ruin a lot of things real quick! Especially electronics and credit cards, thanks for the reminder! Good point on SHTF scenario, there would probably be a crap ton of fakes rolling around. Thanks for sharing your insight my friend! We can all benefit from individuals as yourself with a lot of useful knowledge!! 🇺🇲💪👊

[@eivann12]

greaat video - easy explanation/demo of specific density - thanks.

[@S.G.T.Stacking]

Thank you very much for the feedback! I appreciate that!

[@piranhabadass1]

Wow... my 90% stacking goal just went to the back burner. How do you ping dimes! So Disappointing! As soon as I saw this video I tested it myself and sure enough. I did get better results using the small wand and setting the sigma to 92.5 sterling silver, but still wasn't 100%. It did show most clad on Quarters and halves, but a couple clad still showed up in the brackets. At least for .999 and up, its still very reliable on the machine. I Think???? LOL Thanks for the video brother!

[@S.G.T.Stacking]

It's a little harder to ping dimes, as you can imagine lol. I agree man, I was a disappointed when I discovered this... had to let others know but I agree, it's been reliable for .999FS Bullion thus far! I appreciate you stopping brother and thanks for the feedback!

[@weeklybullion]

Excellent video, SGT. I don’t have a lot of 90%, but the specific gravity test is a winner!

[@S.G.T.Stacking]

Thanks for the feedback brother! The "silver lining" to all this is we probably don't have to worry too much on coming across fake Dimes, Quarters, Half Dollars (aside from the valuable numismatics) because I'm assuming it wouldn't be cost effective for the criminals. I appreciate you stopping by!

[@silversharkc4666]

Got a Sigma but do not collect 90s or below. Only .999 and up so I'm good with mine.

[@S.G.T.Stacking]

Yeah, it works great for .999+ Bullion! Thank you for stopping by my friend!

[@jaybarr3307]

Great vid! Learned much. Question: I see the stick you're pinging with is made of wood and therefore, softer than the silver, but does it leave ding marks in silver rounds, specifically?

[@S.G.T.Stacking]

Thank you for the feedback! It actually does not leave any dings or marks that I've noticed however, I personally wouldn't use it on a numismatic coin with a high value. It's a great tool in my opinion and fairly inexpensive! 🇺🇲💪👊

[@TMYJones]

I also noticed with gold .999+ regular quarters were showing up as a false positives using the wand (small & large). Which I had to use for grams of gold as the main sensor didn’t work due to the smaller size. Anyone else having this issue? I didn’t have an issue with Gold Eagles, silver eagles & silver rounds (99.99 & 99.9). I used the main sensor for those.

[@S.G.T.Stacking]

I'll have to try mine out but I'm sure I'll probably get same results. Thanks for sharing these findings!

[@AmericanNumismaticTreasures]

Very good info! Thank you !

[@S.G.T.Stacking]

Thank you very much for the feedback my friend!

[@johnchemo4248]

Hmmm...you learn something every day of your life...today this is what I learnt...instant subscription earned....keep up the good work...!

[@S.G.T.Stacking]

Thank you very much my friend! I appreciate your support and feedback! I learn something new everyday as well and love to share with others.

[@Seashop96734]

Good explanation brother!! Keep it up!!

[@S.G.T.Stacking]

Thanks brother, I appreciate you Sir!

[@chiil034]

PMV is just one tool. I have one... but I also check dimensions, weight and if possible, ping. PMV does a great job detecting sterling silver, as the wands work on spoons, bowls, etc.

[@S.G.T.Stacking]

It is definitely a great tool, works perfectly for me as a large portion of my stack consists of .999/.9999 Bullion bars/coins. Thanks for stopping by and sharing your thoughts my friend!

[@silverpro8356]

@@S.G.T.Stacking PMV pro is apparently the best.

[@S.G.T.Stacking]

I might invest in one in the future! Thanks for sharing!

[@SilverGoldStackAttack]

Great vid, as usual! I still don’t have a Sig, but someday.

[@S.G.T.Stacking]

Thanks brother! Much appreciated!

[@jasonluchtel7974]

I find that the magnetic slide is also a good test also for your 90% coins. Use it in conjunction with the other tests to help determine real from fakes.

[@S.G.T.Stacking]

Those are pretty convenient, I agree. I don't own one myself but not a bad idea to get your hands on one. Thanks for stopping by and sharing your thoughts!

[@gdub8251]

That was an awesome video, thank you for sharing.

[@S.G.T.Stacking]

Thanks brother, much appreciated!

[@l.j.silveraustereprivateer4010]

O sh😮😮t! I gotta see if mine do that too thanks SGT!

[@S.G.T.Stacking]

Let me know what results you yield! That would be a little embarrassing if it's just my Sigma 😆

[@unknown1_420]

Right on S.G.T., I've got one Morgan I'm not sure of. I've been told 90% can test outside the brackets slightly. This video is super helpful. Thank you

[@S.G.T.Stacking]

Awesome brother, glad to help. Thank you very much for your feedback and support!

[@peterj8278]

Great detective work SGT, appreciate you sharing this information, happy 4th of July. Cheers from the land down under Peter J 🕵‍♂👋😂🗽🇦🇺 🐨🦘👍

[@S.G.T.Stacking]

Thank you very much brother Peter! I'm glad you enjoyed that and thank you for the Happy 4th Wishes! 🎆🇺🇲💪👊

[@TalmageL-pn2pv]

How cool, great explanation too.👍

[@S.G.T.Stacking]

Thank you for the feedback!

[@BigSky-]

Thanks for the Info. 👍🇺🇸

[@S.G.T.Stacking]

Thanks brother, much appreciated!

[@jeffhays1968]

Even the XRF gun can get fooled, though not as bad as the sigma machine. Experience is a thing !

[@S.G.T.Stacking]

They both have their limitations... good thing we have other tools outside this type of technology. 💪🇺🇲👊

[@dougcaggiano3961]

VERY useful video. Great job!

[@S.G.T.Stacking]

Thank you very much for the feedback! I appreciate your support my friend!

[@Car1Sagan]

Wow thanks. Thats a serious problem. Id prefer it to do false negatives over false positives

[@S.G.T.Stacking]

I appreciate you watching and I agree with you 💯

[@Brandon-k5e5p]

Very informative video… you just got a new subscriber 👍

[@S.G.T.Stacking]

Thank you very much for the feedback, your support is much appreciated!

[@gunsgamesgadgetschannel863]

Very helpful video! 👍🏾

[@S.G.T.Stacking]

Thanks GGG! I appreciate your support my friend!

[@bobrobstacker2632]

Very good information thanks

[@S.G.T.Stacking]

Thank you very much for the feedback my friend!

[@l.j.silveraustereprivateer4010]

Feliz Dia de la Independencia para ti y los tuyos SGT👊🇺🇲🇺🇲🇺🇲

[@S.G.T.Stacking]

Oh snap!! L.J. busting out the Spanish! Igualmente mi amigo. Espero que todo este bien contigo y tu familia! 🇺🇲💪👊

[@josephglover4546]

My local coin shop tested my Local Silver Mint "barter bars" on this exact device and they read outside of the brackets for pure silver; confused, and pissed(!), I sent them to be tested at a refiner and they came back as real silver.

[@S.G.T.Stacking]

Often times, these devices will have a hard time catching a good reading on poured bars, especially if there is toning on them or any high relief spots. Did they test it with the Bullion wand?

[@josephglover4546]

@@S.G.T.Stacking No, he just plopped it on there, threw it back, and said "this is fake".

[@S.G.T.Stacking]

@@josephglover4546 I think that's where he went wrong. Had he used the Bullion wand or even the large wand, he would have had different results. Still a bit unprofessional of him to just call it a fake right off the bat without during further tests imo.

[@EveyBee]

Awesome info buddy!

[@S.G.T.Stacking]

Thank you Sir! Just trying to share the info I gather with the rest of the community. That's how we grow and learn.

[@godisgreat8462]

Keep up the great videos 🎉

[@S.G.T.Stacking]

Thank you my friend!

[@anecdotalecon]

Very informative video. Good to know. Wouldnt have guessed.

[@S.G.T.Stacking]

Thank you very much for the feedback my friend, glad you got something out of it.

[@alanpecherer5705]

Well I must say I was disappointed with the ambiguous results on the PMV machine. This is the first I've heard of this problem. I have been considering getting a Sigma, does this means you have to buy the deluxe machine to be able to distinguish among the coins you showed? As far as I'm concerned, there is absolutely no way you can be in the bullion business or even be a serious collector/stacker without one of these machines or access to same. The specific gravity test is also not 100% foolproof. There are some alloys of pewter that will SG out in the mid-10's just like silver.

[@S.G.T.Stacking]

In order to test for specific gravity, the higher end model (such as the pro) would be needed but in my opinion, it's not worth the extra $1k-$2k unless of course you're thinking of becoming a coin dealer as you stated. As for me... I'll stick to testing using the tools I already have (Precision Scale, Calipers (To test dimensions of a coin), Magnets, and a pingtester. Although some fakes can pass certain tests, like the specific gravity, they won't be able to pass all the tests (i.e. weight, dimensions, magnetic, etc). Thank you very much for your feedback and comments my friend!

[@GypsyStacker]

Wow, good to know. great video, Thanks!

[@S.G.T.Stacking]

I appreciate your feedback and for stopping by my friend!

[@JosephShaffer-o1o]

I bought the PRO , even though it is more money, but Totally worth it!!

[@S.G.T.Stacking]

Thanks you very much for your feedback on the PRO my friend!

[@chriscard3424v]

If you go into measurement mode, I bet the basic sigma will distinguish between the fake and real and use wands too. The resistivity # should be different. I have the Pro mini and with a scale does great to confirm both resistivity and density on Au, Ag and Pt, Pd.

[@S.G.T.Stacking]

I'll have to check that out, wouldn't hurt to try. I'll let you know what I get using the wands. Thanks for the tip my friend!

[@chriscard3424v]

@@S.G.T.Stacking I tried with the Pro mini set at 90% and use a Morgan & Peace reading 2.05 (green bar) and clads reading around 1.80 (red bar). Didn’t use the wands bc the unit does a top and bottom read for surface and thru, thickness, diameter etc. Also had a bad Morgan reading way off in the red at 2.40+.

[@84latitude]

@@S.G.T.Stackingdid you try the test with the wands? I was thinking about buying a sigma

[@ynot552]

Great video. Good to know

[@S.G.T.Stacking]

Thank you very much for your feedback!

[@sergiopuszyvieski3083]

Ningún detector es perfecto. Compré el sigma y la medición es correcto. Por decir algo tomé 45 monedas de diferentes paises y denominaciones y 40 eran de plata, 5 no, las fundí y el peso era exacto y al hacerlo un lingote me siguió dando 800 de pureza. Probé un lingote de 20 gramos de oro certificado y no me dio que fuera de 24 quilates, funciona bien, incluso la herramienta MEASURE es muy util para probar la electro conductividad y densidad en quilates.

[@Hives2honeyfarm]

Nice video. Thanks

[@S.G.T.Stacking]

Thank you very much, I appreciate your feedback.

[@SaltySilverStacker]

Howdy SGT! Happy Independence Day! I need another Marine round. Let me know how much.

[@S.G.T.Stacking]

Happy Independence Day my friend! I actually do not have anymore Marine Rounds at the moment. I'll keep you posted if I find another one in my LCS!

[@objvst]

It is wrong for you to test a 1985 clad quarter using the setting of pre1900 90% silver. The machine has it's issues as you point out but doing the test that way is not a machine problem it is a user problem. You don't bite into an apple expecting it to taste like an orange and saying the fruit is bad. Nicely done with the Specific Gravity test, thanks.

[@S.G.T.Stacking]

You clearly missed the point of the video. Judging by your response, I'd be wasting my time explaining it. Thanks for your feedback lol.

[@johnsmith1953x]

@@S.G.T.Stacking You don't have the settings right on the machine.

[@S.G.T.Stacking]

@@johnsmith1953x 👍

[@potato2248]

This is one of the dumbest comments on youtube

[@objvst]

@@S.G.T.Stacking So what is the point I missed?

[@moonpaws1]

Very thorough . Great job.

[@S.G.T.Stacking]

Thank you, I appreciate the feedback.

[@moonpaws1]

@@S.G.T.Stacking I bought some 1 oz silver bars from a guy. They were the correct weight. I did the magnet slide test and they slowly slid down the bar. Took them to a local coin store. They didn't pass the Sigma test.

[@SpokaneSilverStacker]

Great video on how to test. Wow that is a good fake Morgan.

[@S.G.T.Stacking]

Thanks brother, I thought the same exact thing... had the same dimensions, weighed about the same, good fake for sure!

[@ScorpionMetals]

Good info

[@S.G.T.Stacking]

Thanks brother! I appreciate that!

[@constitutionalstacker5701]

Man, what's up with YT not telling me when you put out videos??

[@S.G.T.Stacking]

Doesn't surprise me lol I don't think they are very happy with me hahaha. Thanks for dropping by brother!

[@constitutionalstacker5701]

@@S.G.T.Stacking They don't like me either.

[@WaStJagsFan1970]

Ty for this video

[@S.G.T.Stacking]

No problem my friend, I hope it was of good value.

[@martywebb1487]

Bestbwaynto donsilver is ice if it melts super fast its real if it melts faster than useual its probably 90 percent or lower fater better purity and u density test it and gold and get the equations weigh an 8 ounce cup of water write it down then drop your gold in and weigh it again and divide the first by the second youll get your answer

[@МБ5-д2д]

Спасибо!!! Было очень познавательно 👍👍👍👍👍

[@canadiansilverseeker]

Good to know thanks for sharing Happy Stackin eh!

[@S.G.T.Stacking]

Not a problem! Thanks for stopping by my friend!

[@betoxyz68]

Thank you!

[@S.G.T.Stacking]

You're welcome!

[@jcatchingsilver1932]

Hey SGT! Can you give me the on line sight you use to test your silver? I also need to purchase a ping tester. Where would you suggest I get one?? Happy Independence Day!! God Bless my friend! ❤️🤍💙🤙🏻🥰

[@S.G.T.Stacking]

Hey J! I left a link in the description to this video for the pocket pinger. I would buy it directly from the manufacturer or if you find someone in the community with an affiliate link so they benefit from the purchase, that would also be a great. Unfortunately I don't have an affiliate link but that's what I would do. As a matter of fact, I believe Patriotic Stacker has a link, let me go search for it and I'll post on this comment.

[@S.G.T.Stacking]

Here you go, here's Patriotic Stacker's affiliate link to the pocket pinger: coinpingtest.com/?sc_ref=HDJjd1qou8572B9z

[@DanCooper404]

Just balance the coin on your finger and flick it with a plastic pen.

[@GemaArtemis]

Hola amigo excelente información saluditos

[@S.G.T.Stacking]

Muchas gracias Gema!! Saludos!

[@detoate7072]

I think all Sigma Metalytics devices test resistivity of the metal/alloy. Basic model measures surface resistivity only and PRO measures resistivity through the coin, from one side to the other side. That's why PRO is more reliable - it tests resistivity of the metal inside, not just the metal on the surface.

[@S.G.T.Stacking]

Yeah, that's exactly correct. The PRO also offers a specific gravity test apparently. I'm not sure how that function works but that's what I hear. I'm thinking of upgrading in the near future.. we'll see. Thanks for your feedback my friend!

[@ly8370]

Basic model's bullion wand can penetrate 1.5mm of metal depth. You can circumvent this limitation by testing the coin/bar at both sides (front and bottom). For 10oz bar, it is sufficient.

[@S.G.T.Stacking]

@@ly8370 Good point, I do the same for my coins being tested directly on the Sigma.. just an extra step but in theory I think it would benefit to do it for the reasons you just explained. Thank you very much for your input!

[@SilentSilver24]

Cool video

[@S.G.T.Stacking]

Thanks brother, I appreciate the feedback!

[@SuperDad714]

great video

[@S.G.T.Stacking]

Thank you for the feedback Sir!

[@JosephShaffer-o1o]

This is why I brought the pro model

[@S.G.T.Stacking]

Nice, congratulations on that purchase/investment!

[@JimmyLicari]

Happy independence day SGT

[@S.G.T.Stacking]

Happy Independence Day brother! Stay blessed! 🇺🇲💪👊

[@toastm4n]

good video bro

[@S.G.T.Stacking]

I appreciate that brother! Just trying to look out.

[@keithknechg3217]

Interesting.thanx.

[@jeffkeller9009]

Great video

[@S.G.T.Stacking]

Thank you very much my friend! I appreciate the feedback!

[@ly8370]

It's a 10yo technology with no option of a database update (unlike Pro and Investor).

[@RealityTrailers]

Do tell us more, please.

[@thewindowcleaner812]

It's not just Silver, mine has issues with gold too

[@S.G.T.Stacking]

I haven't ran into any issues with pure silver or gold. What kind of issues have you come across?

[@thewindowcleaner812]

@S.G.T.Stacking I was testing some .999 Gold Bar's and put a regular quarter on it and it read it as Gold lol

[@S.G.T.Stacking]

Yeah, that doesn't make sense at all! About to try that see what kind of results I get. Thanks for letting me know!

[@thewindowcleaner812]

@S.G.T.Stacking as far as 90% Silver it will read 90% on about anything I will throw on there

[@S.G.T.Stacking]

Yeah, I noticed that too.

[@jeffcrumpler8793]

Use the sigmapro or use the excess

[@S.G.T.Stacking]

I figured either one of those models would do the trick, I'll have to check those out some day! Thanks for stopping in my friend!

[@martywebb1487]

U have to know the math tho on the density of gold and silver

[@martywebb1487]

Yep seen it done w a morgan too

[@venuzshorts8712]

Wow good video 👍 saludos

[@S.G.T.Stacking]

Muchas Gracias Venuz! I appreciate your support my friend!

[@silversharkc4666]

Gotta remember this although I don't stack 40s 0r 90s, might be a day when I need to test them. I buy mostly graded coins and the only test for .999 or .9999 silver is the Sigma.

[@S.G.T.Stacking]

For sure! Get yourself a precision scale for $20 or so and a ping tester and you're good to go to test 90% silver. I haven't ran into TOO many issues testing .999 and .9999 Silver Bullion on the Sigma, so I'm happy about that. Thanks for stopping by!

[@silversharkc4666]

@@S.G.T.Stacking Thanks and yes I have all the tools including a Sigma but never knew about the error on 90s.

[@silverstormienormie6146]

You cNt fake a ping. How come you didn't use ping coin app? I saw that you had it on your phone and it's free. Like you said that site you were using charges for alot of stuff. Good concise video. Thanks

[@S.G.T.Stacking]

Lol man, talk about attention to detail! Good catch! Ping coin app is good to go as well, don't get me wrong but I like that the Precious Coin Tester App gives you all the information you need to test the weight and dimensions so you can do that right after. They both work great though. Thanks for stopping by my friend!

[@silverstormienormie6146]

@@S.G.T.Stacking 🧐🤪

[@deanr1963]

Semper Fi brother

[@S.G.T.Stacking]

Semper Fi my brother! 🇺🇲💪👊

[@barbararios8995]

What is the Scale you used??

[@S.G.T.Stacking]

You can find it on Amazon for $18, just search "Fusion digital pocket scale".

[@TheSilverSphincter69]

happy 4th!!!! hifive

[@S.G.T.Stacking]

Happy 4th to you as well my friend! 🇺🇲💪👊

[@SilverandCigars]

interesting

[@S.G.T.Stacking]

I thought so too... made me wonder why even have the option but then I thought, they may just use the same hardware/motherboard for all the units.. and just added extra options from the pro. Idk 🤷‍♂️

[@fmg4537]

Great video. Would you do the water specific gravity test for .999% gold or silver? I ask because you didn’t mention it for that. I’m new to the space. Thanks

[@S.G.T.Stacking]

Absolutely, I'll do one in the near future. The main reason I did this video was to show how the Sigma Basic does not differentiate between clad and 90% silver. Thank you very much for your feedback! Happy Holidays!

[@fmg4537]

@@S.G.T.StackingSounds like you’re saying the .999% doesnt have the same issue? Thanks bro. Happy holidays to you as well

[@S.G.T.Stacking]

@@fmg4537 Correct, this machine does not have that issue with .999 or .9999 silver/gold. I have heard of people still getting false positives on it, so it's not 100% accurate but it is an added line of defense when it comes to validating the legitimacy of your stack. No problem at all brother! 🙏

[@fmg4537]

@@S.G.T.StackingThat is why to add the other tests. Thanks buddy.

[@fmg4537]

@@S.G.T.Stacking I forgot to mention. Just bought the scale and ping tester you recommended. Can you please drop a link for the caliper you use as well? Can the earth magnet be purchased at the store like Walmart or is there a brand you recommend? This will be my last message. Thanks :)

[@dancerscc]

How long have you owned that model?

[@S.G.T.Stacking]

I've had it for about a year but I'm looking to upgrade soon.

[@dancerscc]

I did recently purchase the investor model.@@S.G.T.Stacking

[@millwoodlabs]

Get the pro.

[@S.G.T.Stacking]

Yeah, I'll be upgrading very soon!

[@MrBraun-kq5qf]

What if you used a wand?

[@S.G.T.Stacking]

There was another person that suggested the same but unfortunately it yielded the same results (at least with the fake Morgan and real one). Great suggestion though, thank you!

[@HKYT649]

thx

[@fullskip0831]

Would this be good for gold nuggets

[@S.G.T.Stacking]

I wouldn't recommend buying one for that. I would just take the nuggets to a coin shop to get tested. This machine is meant more for bullion.

[@PIPIRIPAU21]

Good stuff

[@S.G.T.Stacking]

Thank you very much!