Sony Bravia 50inch 3D Smart TV Vertical Lines Repair

[@umeshlahiru7621]

I cut both the left and right sides and the work was successful, thank you very much.

[@DBifix]

Glad to know this video helps.

[@ibanorueta2020]

What do you mean when you say "cut both the left and right side".How do you do it? Can you pleas explain or send a link video or photos? Thankyou

[@gplus1000]

I have a t-con board ordered for mine. I'll let you know what I do and if it worked. TC boards are getting really hard to find for this model. If that doesn't work, i'm going to cut the 2 connections at rg6 like in the video after i check which side is causing the issue. If it is on the right side instead of the left side as in the video, i guess i cut the 2 connections just to the right of the 2 cut in the vid? Not sure on that yet. I have KDL800B. This model seems to now be falling apart all over the place at the same time, with the same issue. I'll come back to this thread when I get my board and let you know. I would have loved to see this full video, plus, not in fasst forward speed.

[@gplus1000]

Replacing TC board didn't solve problem. After isolating LC1 and LC2, the issue was on the left side, exactly as the OP's problem. I cut LC1 and LC2 at the RG6 location and didn't solve the problem either. Looks like I'm going shopping for a new TV.

[@ibanorueta2020]

Hi, I have sony kdl50w829b model with vertical lines, yellow and one red.I changed tcon board but nothing changed.Would like to know the steps, did not understand very well what you did(how)? What means cut LC1 and LC2?

[@BrendaJolly-e8j]

I didn’t get anything outta watching this video to help me, all I did was watch and hear how somebody else repaired a tv as to where it didn’t help me with my tv 4:28

[@manuelponce3994]

Saludes desde Honduras... Máster

[@DBifix]

Gracias

[@kaoslord4924]

i have exactly the same problem on my KDL-40HX720. should i try open it ?

[@user-bw5hk5nb3k]

Hi, do u know if its fixable when i have get 19.5V From DC Powet but the tv cant turn on ? which part of the pcbs i must look and search ? : (

[@JensMüller-w9c]

Hi, many thanks for the video. I have the same problem with Sony KDL 50W805, but at the right hand side. But I still need some help. How am I supposed to cut off the LC2? Just scratch the contacts? Kind regards from Germany! Jens

[@JensMüller-w9c]

I will share photo of the circuit board.

[@KONANTSIALAS]

Did you find a solution?

[@ignacioluna6305]

Tengo una Sony KDL 50W800C, con el mismo problema, en este caso el voltaje de LC1 y LC2 sube y baja...

[@mroplok-othok2888]

Assalamualaikum kawan hadir ijin nyimakkkk videonya

[@alek945]

Hello. My TV is kdl-50w809c. It started giving me an error 5 blinks I put tape on the right ribbon cable and now it goes but it gives almost the whole display thin horizontal lines. about 20 cm from the upper side there are no lines. Any advice on what to do?

[@marwenhajhmed7200]

Hello i have the same problem can you help me please.

[@RobertGan-x1m]

How do I contact you for service?

[@uzodimapaulochei1286]

Please I have exact same issue with my Sony bravia TV same model Please I need this video in English. Thanks

[@DBifix]

Hi Sir, Sorry I was not able to create this video in full English. However, the subtitle is in English. How can I help you? Are you able to access the T-con and the top board? if yes please try to isolate which part of the screen is causing the problem by removing the LVDS cable as shown in this video. Once you confirmed which side then you have to find the LC1 and LC2 signal for my case left it should be the same location in the right side, just cut the pads (also shown in this video). If you have multimeter, better to check for lacking or over voltage before cutting the pads. Hope this help.

[@luielapertimos3242]

Puede po pa repair sayo sira din sony tv nmin 43 inches

[@DBifix]

@@luielapertimos3242 Hi Maam, saan po ba location nyo? abroad kasi ako. pwede ko kayo i-guide kung kaya nyo mag disassemble at solder ng TV.

[@machollomah6043]

@@DBifix I ALSO HAVE THE SAME PROBLEM, I ACCESSED THE T-CON AND GOT A NEW ONE TO REPLACE IT, BUT I STILL HAVE THOSE VERTICAL LINE DISPLAYING ON MY SCREEN

[@khabiruddin3502]

@@machollomah6043 same problem

[@marwenhajhmed7200]

The right side i don t know what i cut exactly.

[@joemmendoza6144]

Ask ko lang kung pa ano mag pagawa ng tv sayo? Gusto ko po sana

[@DBifix]

Abroad po ako sir, sorry.

[@aciknan8258]

What the problem sir ? My tv got vertical line same on your video .

[@manushekharful]

I have Sony KDL-42W700B, TV is working fine but display is showing horizontal lines of different colours. What would be the cause ? How to repair ? Can I get any contact details/group?

[@jeromecruz478]

ganyan din po case ko may shop po b kyo

[@robercionpanuga9737]

hello po ganyan din tv ko may mga guhit pababa sony bravia 46inch magkano po pa service

[@DBifix]

Hi po, sorry nasa labas ako ng pinas OFW kasi ako, kung kaya nyo po magbukas ng TV follow nyo lang po yung sa video ko, otherwise pwede nyo contakin si Leboy technicain Search nyo nalang po sa FB nag seservice po sya.

[@mostaffahpirino4466]

paano po i-cut yung LC1 at LC2?

[@modymeran4739]

Hello sir same problem po tv ko pwde ba pagawa s inyo?saan po location nyo sir?

[@DBifix]

Nasa abroad po ako sorry.

[@geraldpera7224]

magandang gabi boss pwede paturo ganyan din yung problema ng tv na binigay sakin ng amo ko 55 inch to sinubukan ko yung ginawa mo tinanggal ko yung ribbon wire na bandang kaliwa nawala yung bar tas binalik ko yung kanan naman tinanggal ko bumalik diko alam kung saan ako magsusukat ng voltahe paturo sana po ako salamat

[@DBifix]

Good day sir, kung sa left ang cause ng vertical lines try mo cut LC1 muna papsok sa panel gaya ng ginawa ko. With regards sa voltage simulan mo sir s t-con dapat lahat ng inductor my voltage ka makukuha at wala dapat short.

[@joanbe3578]

Cuanto deveria ser el voltaje lc1 y lc2 y de donde probienen?

[@robynr6886]

Pano pag brand new sir sony din tapos parang nadaganan lang ng saglit. Biglang ngkavertical lines na

[@DBifix]

Baka po nagkaroon ng crack ang lcd.

[@lelandtv6422]

Nadaganan saglit edi basag hehe😅

[@arjaysamontecollectiblefig8167]

Sir same problem ganyan din yung tv namin ngayon😭 after 5yrs namin na gamit bigla nagkaroon ng mha vertical lines

[@zakimunar7893]

Tanong lang po kung ano po yung naging dahilan kaya bakit bigalbg nagkaroon ng vertical lines sa sony tv?

[@DBifix]

Internal short sa LCD.

[@desmondmusarurwa2178]

Why is taking to long to download

[@christianfernandez3863]

sir hm po pagawa nang ganyan

[@svsrinivas628]

Which part you replaced tell and show clearly okay

[@DBifix]

I did not replace anything, I just cut the LC1 and LC2 line signal.

[@slawektrabka76]

@@DBifix how did you do that?

[@CharlesWrice-qw6yg]

❤❤❤❤❤❤❤❤❤❤😊

[@kienflorida660]

Pwedi pa pa repair Sayu sir

[@DBifix]

Pwede sana sir kaso OFW ako.

[@bismarkarnez5915]

Traducción al español

[@waldemarswider3434]

that is, you did a "miracle", because you showed NOTHING. Don't make fun of yourself.

[@karismann3302]

I would like to show you a photo of mine. Please is there an email or social accounts I can send to?

[@DBifix]

You can share here the link of the photo