Sony DVD Player Won't Spin or Read Disc Fixed. Model DVP-SR210P

I show how I fixed a Sony DVD player that had a bad motor that needed replaced. Model: DVP-SR210P
I am an Amazon Associate so I do earn from any qualifying purchases when using my link.
Disc Motor: amzn.to/3GcPvnw
Evidence for Christianity: • Evidence for Christianity
Evidence for the Bible:
• Evidence for the Bible
End Times: • End Times
The Book of Revelation: • The Book of Revelation
Share Your Trade: mewe.com/join/shareyourtrade
Join Robinhood with my link and we'll both pick our own free stock 🤝 join.robinhood.com/justinp5054

[@sanne9101]

I have an old Samsung Home Theatre system from 2008, the dvd wasnt working and it was just the motor! It didnt even manually start spin, feels brand new again, I loved it because its region free and I have a lot of both Region 1 and 4 discs in my collection, thanks for the help ❤❤❤

[@becausestuffbreaks]

Glad I could help. Thanks for watching!

[@Cdsystemples37467]

My dvd player is old Sony it was In our backyard it is DVP-NS300

[@irfansaeed9414]

Thank you for the video . It was enlightening

[@becausestuffbreaks]

Thanks for watching!

[@tribblebooth1224]

High five! Absolutely brilliant!

[@becausestuffbreaks]

Thanks for watching!

[@rwnfernando]

Thank you for the video. Could you tell me why the head doesn't move pl? What checks should I do?

[@becausestuffbreaks]

Check cable and wire connections. Check if screw gear is turning. Might need lubricated.

[@ademolaoluwaseun8896]

Good evening. My Philips DVD is saying No disc to every disk I put inside. What can be done

[@becausestuffbreaks]

@@ademolaoluwaseun8896 Clean off the laser lense with rubbing alcohol and a Q-tip and buff it dry with the other end. Let me know if that works

[@rjvagv1]

Awesome job! Have you repaired PS3s/PS4s XBoxes etc for the same issue disc no longer spins.

[@becausestuffbreaks]

I have repaired PS3s

[@christianorthodoxy4769]

I love fixing and cleaning our DVD and/Blue-Ray Recorders.

[@becausestuffbreaks]

Me too!

[@RonRivet]

Well I certainly wasn`t expecting the first parts of the video but very cool! God bless you brother. I too am a follower of Jesus and I owe Him my life! Thanks for posting.

[@becausestuffbreaks]

To God be the glory! Thanks for watching!

[@RonRivet]

@@becausestuffbreaks Amen! 😀

[@ericcharlton311]

My Pioneer PD-4700 cd spindle motor has orange and yellow wires soldered to it, so if my replacement motor has red and black wires, does it make a difference which wire the red gets connected to?

[@becausestuffbreaks]

Yes, because it will spin backward if you get it wrong.

[@garyr7027]

Yellow with black, orange with red.

[@lovondafowler2036]

I’m trying to remove one of the 3 tiny screws that holds the spindle motor together. I had success with the first two but the 3rd won’t budge even when I try small screwdrivers. Any tips? Thanks!

[@becausestuffbreaks]

Can you get WD40 onto it?

[@mr2_mike]

Soldering iron. Get it hot. Touch it to the top of the screw for a few seconds, then quickly try turning it.

[@williamwong5627]

I like the sound of the DVD player making before repair.

[@hopenavajo1391]

People throw away lots of dvd player when it says no disc,but there are person to repair it. When a dvd player is taken in repair, the technician gets smart with you.

[@becausestuffbreaks]

I love fixing stuff people throw away

[@hopenavajo1391]

@@becausestuffbreaks awesome 👌

[@hopenavajo1391]

@@becausestuffbreaks I took a magnavox dvd player apart and the dvd motor it doesn't have wires attached to it.

[@becausestuffbreaks]

@@hopenavajo1391 soldered straight into the board or on a ribbon cable?

[@hopenavajo1391]

@@becausestuffbreaks so there is no OEM that can't be replaced to it

[@mikimiki4389]

On my technics CD player write no Disc and not spinning motor. When i was opened the player I directly connect 5v to motor and he working normal. Its Maby defects capacitors on board?

[@becausestuffbreaks]

Probably whatever motor driver supply chip they use.

[@mikimiki4389]

@@becausestuffbreaks kzbin.infoxR3hyWzQ92I?feature=share

[@mikimiki4389]

@@becausestuffbreaks kzbin.infodLaiXBIS-Bc?feature=share

[@pwrsrge2206]

I have that same player. The disc drive motor is fine, but the player often fails to start a disc, or it stops while playing, either with a pause then continues playing at some point by itself, or permanently; note that the disc continues spinning during these episodes. I found that if I press down on the rack drive motor (the one visible from the top in the rear corner of the play module) or the rear part of the surrounding structure it kicks back in and operates properly. It goes for a while but usually fails again at some point. It sometimes also has trouble skipping or going to a different track. I can't tell offhand whether it's a mechanical issue with rack drive jamming due to structural flex or something electrical (loose connection?) with the motor or another component. It's a bit impractical to leave the cover off and have to press on the rack motor or part of the structure every time it goes down. Any suggestion?

[@becausestuffbreaks]

Try cleaning the laser lense with a Q-Tip and rubbing alcohol. Maybe it stops seeing the disc and that's why it shuts down and then kicks back on when you push down. Also unplug and then plug back in your cable bundles and ribbon cables. Let me know what you find.

[@pwrsrge2206]

@@becausestuffbreaks Thanks for getting back to me. It turns out it's the spur gear on the laser rack drive motor. The gear had split over time between two teeth, I assume due to the assembly press fit, and so meshes intermittently. Until I can find a replacement gear, if that's even possible, I loosened the motor screws and shimmed it to one side to allow a little mesh clearance where it was hanging up. Probably not ideal from a gear wear perspective, but seems to work for now. Pax Christi. 😉👍

[@becausestuffbreaks]

Awesome! Thanks for the info

[@pwrsrge2206]

@@becausestuffbreaks I found this video of a fix for a split spur gear that was causing the same problem I had. I haven't been able to find a replacement gear, so may resort to attempting this as a more permanent solution than cocking the drive motor. kzbin.info/www/bejne/gaOUZ6JujrKUa9U

[@pwrsrge2206]

@@guitarman_3693 Thanks guitarman. At some point after my temporary fix, the player acted up again, and I found it was due to the spur gear sliding on the shaft to the point where it disengaged from the mating gear. I ended up boring the spur gear hole very slightly to where the crack didn't open when installed on its shaft, then applying a small amount of E6000 adhesive to the shaft plus a small blob on the end of the shaft to prevent sliding. I was then able to remove the shim under the motor and fully secure it by tightening the screws. Works fine now! Regarding your belt comment, I did find that useful on another player, a Technics SL-P101. The disc drawer on that unit was not opening properly due to stretch in the original belt. I ordered a new belt from Russell Industries and that fixed the problem. See a similar unit being repaired in kzbin.info/www/bejne/kJLWaqiPotaVbMk.

[@ConnieinVirginia]

I've just opened up my dvd player & cleaned the laser lens, but no luck & the disc still wont spin either. I dont know what else i can do, mine is a Sylvania & its only a couple months old. Please HELP me!😢

[@becausestuffbreaks]

Probably the motor. Did you make sure all the cables and ribbon cables are seated in all the way?

[@ConnieinVirginia]

Could mine be the motor, mine isnt making any sounds?

[@linkmasters535]

I bought a Sony blu ray used a long ago but putting a brand new dvd disc in the player it makes circles on my new disc so what is the problem with it it makes me not wanting to put any more disc in this player ever again

[@becausestuffbreaks]

Eek. That's not good. The screws holding in the disc drive motor might be loose and causing the disc to drag on something inside. Either way, you'll have to take it apart and see what's scratching. Maybe there's foreign debris inside it.

[@linkmasters535]

Or maybe I’ve should have bought a new Sony blu ray dvd player because not knowing what the original owners did to it

[@becausestuffbreaks]

@@linkmasters535 that too. Thanks for watching!

[@fenech97]

The black powder could be from the grommets or rubber -mountings.

[@becausestuffbreaks]

Good to look around for the source. Thanks for watching!

[@garyr7027]

More likely carbon brushes from that motor. It was directly under the bottom side of the motor, right where the brushes are located. That piece of copper laying there?... is also part of the brushes.

[@fenech97]

I tested the motor and it works.

[@gracie2298]

Well me doesn’t have a spare motor. 😢Would you give me some guidance on replacing my 12 year old, very much used DVD player please? Am online at Walmart & eBay. That’s my choices, nothing locally. Thank you.

[@becausestuffbreaks]

Here the part on Amazon: amzn.to/3GcPvnw

[@gracie2298]

@@becausestuffbreaks Thank you!

[@becausestuffbreaks]

Let me know if that works. Thanks for watching!

[@gracie2298]

@@becausestuffbreaks have been boycotting Amazon for years now. Have replaced my 12 year old dvd player, hooked up yesterday. Appreciate your response. My Bose sound bar went up too. They sent me new cables, but no😢. The cheapie dvd player lasted longer than the very expensive sound bar. Also hooked up new t.v. Don’t need a sound bar. Sorry in advance to the landfill. Happy New Year!🎊

[@BasilisD.]

I have the same dvd player and when i press the ON/OFF button did nothing what happend? Thanks

[@becausestuffbreaks]

Sounds like a bad power supply or button. Have you tried the remote?

[@BasilisD.]

@@becausestuffbreaks the remote is lost unfortunately

[@becausestuffbreaks]

If you have another Sony DVD player, the remote should work on this one also

[@BasilisD.]

@@becausestuffbreaks OK thanks

[@cinematimewithjason]

How do you get the disc out if the tray won't open

[@becausestuffbreaks]

You'll probably have to take it apart

[@cinematimewithjason]

@@becausestuffbreaks that's what I'm trying to do

[@cinematimewithjason]

What kind of screwdriver do I need

[@becausestuffbreaks]

I don't remember, but I assume it was a Phillips head

[@cinematimewithjason]

@@becausestuffbreaks ok

[@izaekranazelimproglasitiyoutub]

Coll video

[@becausestuffbreaks]

Thanks for watching!

[@boblum3360]

Thx for this. I have a cheap $30 dvd player that wasn't reading discs. I was about to chuck it, but this video showed me that the problem was the motor. I keep the lid unscrewed now to manually kick the motor until it finally dies.

[@becausestuffbreaks]

Get all the life out of it that you can. Thanks for watching!

[@izaekranazelimproglasitiyoutub]

Coll vide

[@becausestuffbreaks]

Thanks for watching!

[@Kurimi13]

If someone starts a DVD repair video by preaching, I'll just click off, its fine.

[@becausestuffbreaks]

Your loss. Hope you change your mind about Christianity. You know where to come if you need some answers. Thanks for the view!

[@lokeshmoghe34760]

चल नहीं रहा है तो उठाकर कचरे के डिब्बे में फेक दो लेसे भी ये घटिया products ha kuch kam ka nahe ha company ko theek bana na bhi nahe atta ha

[@zigmonger6646]

What's with all this religious stuff at the beginning of your video? If I want to search her find God or Jesus or read the Bible well I normally don't go to a fix it video on DVD players. ... I got a lot of problems with that stuff anyway like if you got it so infallible well then why did he banish Satan here? If we're God's purpose on this planet and we're made in God's image and God loves us and all that stuff why would he stick us with Satan why didn't he ban him to Pluto seems like the only smart thing to do.... And Adam and Eve the first humans were deceitful and betrayed God and then their offspring Able wasn't able to avoid the cane of Cane and there was murder....so you know God's not off to a very good start he should have stopped right then and there. he is a idiot, that one.

[@becausestuffbreaks]

Or this was all part of his plan from the beginning. God wanted to make himself known to his creation. How can He show his unconditional love and forgiveness for His children without the fall? Or show His wrath and mercy without the fall? Sin and sinners suck, but they are supposed to suck. How would we know/experience that without the fall? We have the privilege to see and experience the attributes of God and I praise God for that. You should check out this video I made talking about a lot of this: kzbin.info/www/bejne/j2islIt7iM6LmaM

[@zigmonger6646]

@@becausestuffbreaks we'll I'll tell you that if your god is so great he could have found a way for it to work WITHOUT torturing his own son ( what a terrible example for dad's everywhere) without murdering all those innocents during the flood (not everyone on the planet was wicked a 2 year old baby can't be wicked and how many people died because of the actions of others isn't that one of the things we detest most in our society is when somebody else pays the price for somebody else's faults) and he could have figured it out without banishing Satan here why would you taint your own special Creation with your own worst enemy and by the way who creates their own enemy anyway cuz if God can see the future and knows what's going to happen why would he allowed the archangel to go rogue on him anyway I can think of so much more to say so much more that is absolute nonsense in your belief like God telling Abraham go get your only son to sacrifice and then when he comes with his son god says oh i was just joking....yeah well thanks alot god, u prick.

[@ericcharlton311]

I think morals for humans mostly were adopted from the Bible and if you don’t have morals, you shoot up school children, run over people at parades, plant bombs at parades, steal money from your constituents you’re supposed to be helping, cheat on your spouse, etc. Some people don’t have a moral compass and need an instruction manual, so to speak, to learn them. Some still don’t learn them and that’s what jails are for.