Sony TV RED Light Blinking 5 Times Issue Fixed

[@srinivasrao2955]

Please buy one head camera and make more videos. Your video is awesome.

[@binoygeorge5922]

Excellent video Thank you😍

[@GidFix-pl3lg]

Great tutorial. Did you ever find what caused the fuse to blow? Did the fuse blow again later? Is the TV still functional?

[@hobby_plus]

Your presentation is vary good, hope I will solved my problem.

[@tech-corner2556]

Good luck mate.. Let us know the results..

[@jrkovar]

Very thorough. Detail appreciated.

[@kevingarvey4887]

So, just a recap. The fuse was bad on the main board, and you replaced it. At the end of the video, you powered the TV on, I saw the splash screen, but then it went back off. So, what was the problem? Was it the T-Con board, or is the TV functioning properly?

[@tech-corner2556]

Sorry my bad. I forgot to show you the home screen once it is loaded. Yes, the issue was the fuse on the mainboard. The same behavior can be seen if the fuse is blown in the T-Con too.

[@roryfields268]

hey buddy this was a great video perfect results I am haven g the same Problem🤔💯👍

[@akudookoro913]

Nice... Exactly what's wrong with my Sony bravia

[@AlemirAdam]

have you repaired?

[@FelixOwusu-h9s]

Thanks dear for a detailed explanation

[@emduplessis9996]

Excellent video! Thank you !

[@arjunsethurajaraman5398]

Same problem for me.. i tried everything.. and finally went with sony service centre they asked to replace the t con board. Pls advice.. they are asking to go with imported than sony due to cost issue.. once after changing will it work properly.. or again any problem will come. Can i go for service or to change new tv. Pls advice. My tv is 8 year old 50”

[@pirmansyah5]

Good job, thanks your sharing

[@ΣτελιοςΚοττας-υ7τ]

Hello my friend very helpful video one question i have led 32inch tv i have 85 v output for leds black wire not the red wire leds open and then no lights turn on what should i check thank you so much for your help and time any advice.

[@tech-corner2556]

what is the model number? And do you see red light blinking code?

[@davidjaimes6440]

hello there I have Sony XR-75Z9J and is giving me the same error code 5 blinks but with a white screen and 2 black vertical lines....can you point me in the right direction Thanks

[@slykobina]

👏🏾👏🏾👏🏾.

[@HarshanaIndrajithRanasinghe]

[@DodyMenahMgalal]

Thanks

[@tech-corner2556]

No problem

[@ashokjha1712]

Hello sir I am facing the same issue 5times red light blinking with my Sony TV XR-55X90J. Service engineer came and without doing /checking anything he is saying that there is problem with main board. Need to replace with new. Is there a way to repair? Please advise Please advise....

[@AlemirAdam]

How much does he charged you and asked for replacement cost?

[@tech-corner2556]

In my TV also, it was a main board fault. Without troubleshooting I can't say whether it can be fixed or not..

[@rajendrannatrajan9251]

I have the sony model no klv40r452a same five times blinking problem.but some said the model dose not have a tcon bord.is its true.

[@michaelkukura6208]

So my Sony XBR-65X750D has a flashing red light just below the SONY logo, no picture or sound. I took the back off and disconnected the ribbon from the T-Con board. I turned the TV on and the screen lights up and to my surprise it started playing "Dreamy-Like"music. The music has me baffled as it won't play when the ribbon is connected nor will the screen light up. I plugged the ribbon back into the T-Copn board, turned on the power and no music but the red light flashed 5 times once again. I just want my 8 year old TV to work. Any suggestions will be welcome. Thanks.

[@tech-corner2556]

Most probably the issue is in T-CON board. First check the fuse in the T_CON board (it is near to the ribbon cable in the T-CON board). Then check the capacitors (smoothing caps) near the fuse. If still can't find the issue just replace the T_CON board and see. Good luck.

[@eidodoos]

thanks for video and for speaking english. my problem is main board(board with hdmi, rj45 port) is not getting 12v. is that wrong? my tv is sony kdl46ex720. please can you make video "this should give 12v, this should 3.something volt,etc. so we know how to troubleshoot. sorry is this ask is too much but i cant find any video about that on youtube.

[@tech-corner2556]

You get the standby voltage?

[@juanfernandez4254]

Como te lo puedo enviar la tele

[@hammiranda]

Faulty main board. Common issue with these TVs

[@harryfogarty8190]

You have remote issues if you need to press it that long

[@redfaman]

Did not work

[@chetanpawar5905]

Same for me, some noise started after this

[@tech-corner2556]

Noise mean, the TV is working in Analogue TV mode. Most probably your TV has backlight issue..

[@bhupeerautela3294]

Knowledge dae nahi rahae hae

[@bhupeerautela3294]

Time waste kar rahae hae

[@blrvlog8775]

Bad video, I didn't understand anything, keep the video in your back