This fix worked for me. I went to the Hisense support site, entered my TV serial number and was provided the latest firmware version to download along with a readme guide. Crossed my fingers, installed the update and now my TV is working. Thank you for the video.
@thedjmaximuss Жыл бұрын
THANK YOU!! This video fixed my 70h6570g with this exact issue and thought I had to get rid of my t.v since it is past warranty. This video works I installed newest firmware and my TV turn on and stays on again! Thank you taking the time to make such an easy to follow video.
@niftysbunker Жыл бұрын
can we do it without hisense remote? will this work if I directly use the power button on my TV?
@alexander_sinclair28 күн бұрын
To anybody that has issues with this, try a different flash drive. Even if it appears the flash drive works, try another one. At first I was using a 2.0 8 GB flash drive and it wasn't working. I then tried my 3.0 16 GB flash drive and it worked. I think my 8 GB 2.0 flash drive was bad. So it doesn't matter if you use 2.0 or 3.0. this worked for me the once I found a good USB flash drive to use.
@mikewalker186210 ай бұрын
It worked!!!! Thanks. I was freaking out at first. God bless you!
@monojitdasbairagya Жыл бұрын
It Worked!! And probably going to work for you. I recently tried to reset my 2.5 years old Hisense 55H8G. During that process, my TV screen got stuck with this similar problem. The boot wasn't processing and shutting down every time. Contacted Hisense and after letting know the problem suggested to go to an electrician. Tried every method found online. Didn't work. Then, I saw this video and downloaded the firmware, and tried to install following this process. But again, it failed. Tried one more time with an older version of Flashdrive as the prior one that failed was USB 3.2 and has exFAT32, so probably the 2.0 USB port in the TV doesn't support completely. And this time, it worked (and it was FAT32). I just had to keep the power button pressed on for a long time. Even I thought the TV went to shut off again, but still, I kept the button pressed. So suggestions for this problem, - 1. Use a flashdrive that has 2.0 port (3.0 or above, maybe not a great choice for this work) 2. Try to keep the power button on after putting the flash drive on the TV for a long time, even though it looks like the TV shut down again. 3. Try multiple times the same process (even when it worked, it didn't first time, I almost gave up and tried one last time, and it did work) I already thought to throw the TV in the trash. So this helps to someone like me who thought the TV was gone.
@wholio503 ай бұрын
Mmmh, I'll try it again tomorrow. I did it the first time, it looked like everything went well. After it said software update 'Complete' , the screen went black, waited awhile, and now the tv won't turn ON at all 😒
@BlocheadkaygАй бұрын
I came to say you the real goat !!! I didn’t realize I was doing it wrong this whole time and using the wrong usb . I used an older one like u said and it worked . Also the real key is what you said about making sure you keep holding the power button even when it shuts off and go black . Thank u 🙏🏼
@atmamaraj8449 Жыл бұрын
Hisense is finally offering firmware on their website.Before you had to contact customer service to get it.I had the same issue with the same 70 inch in this video and got the update from customer service. Then got the 75 inch version of this tv that someone was throwing out so I contacted customer service for the firmware. They told me they have begun providing firmware on their website.I checked and there it was.I downloaded and the 75 inch is now working.You just enter the serial number on their website and the downloads come up.
@castlesgrave5801 Жыл бұрын
I downloaded it but it finished updating now it doesnt turn on att al or do anything
@atmamaraj8449 Жыл бұрын
@@castlesgrave5801 That is odd. I did not have that experience at all.I wonder if you had the correct firmware.Granted it should be correct if you entered the serial on the Hisense software site. From what I have read Hisense tvs will attempt to use firmware even if its a different model.That can potentially brick a board.
@lamarwarren-q2m Жыл бұрын
Hello. I followed all the directions and it powers on and I can see the USB upgrade starting, but then the Tv just turns off. Please help.
@JohnnyWalksAlone2 ай бұрын
Thanks !!! Was missing the on how to put the file on the tv Putting in flash and top port made it an easy fix Thank you again for your knowledge 😁👍
@TigredelMar8 ай бұрын
Everything was going fine, then when it finished the tV turned off and it does not turn on anymore, tried to re-do the process and no Luck!
@SOSfixElectronics8 ай бұрын
must be bad a nand ic, you have to replace the main board
@derekgella17223 ай бұрын
@@SOSfixElectronics same issue. out of warranty. i wonder how much it would be to fix?
@wholio503 ай бұрын
Same problem here. It finished the software completion. Screen went black. Now, it doesn't power up at all....😒
@wellingtontejeda83027 сағат бұрын
Hi, I have been trying to to this, already downloaded the software but the thing is that I am supposed to to plug it in the TV while my TV is on, and it does not last 3 seconds before rebooting itself. Right now the USB is connected to the TV with the software update but keep rebooting... any advice? Thank you in advance!
@strash354410 ай бұрын
thanks for this it worked perfectly
@markb80352 жыл бұрын
Hi I have a 55 Hisense android and mine turns the Hisense logo and than the android logo comes up than it just turns off any solutions buddy for got to mention it only has one board which I think is the main board maybe built in power as well but there is only one board
@SOSfixElectronics2 жыл бұрын
try system update by usb
@markb80352 жыл бұрын
@@SOSfixElectronics ok thank you
@selvinmckay6768 Жыл бұрын
Same. Mine just keeps rebooting and in a loop.
@alaaalattabi85212 жыл бұрын
Thank you for the amazing video
@simo48252 жыл бұрын
Thanks Bro for sharing, u r the best
@reacey2 жыл бұрын
Im seeing alot of these new tvs have external power supplies, i wonder if this is a good or bad thing
@SOSfixElectronics2 жыл бұрын
those newer tv has a very small power supply. the company wants to make the tv more flat by removing power supply to external, and that will make it more easy and repairable for power issue if the company offers a replacement will be good.
@wisher21uk2 жыл бұрын
Great fix I thought backlights at first lol
@SOSfixElectronics2 жыл бұрын
😁 lucky me wasnt. this newer model has the screen glued with the frame
@wisher21uk2 жыл бұрын
@@SOSfixElectronics wow glued down they do that so it’s less serviceable I take it, i have had them double sided sticky taped down but not glued Well done all the same
@SOSfixElectronics2 жыл бұрын
@@wisher21uk yes it is a double side tape but by the time and heat it as super glue 😁
@wisher21uk2 жыл бұрын
@@SOSfixElectronics lol dental floss between panel and frame works well and a little bit of IPA too 😊
@niftysbunker Жыл бұрын
can we do it without hisense remote? will this work if I directly use the power button on my TV?
@SOSfixElectronics Жыл бұрын
yes you need the original remote
@DavidMartinez-ox8ew Жыл бұрын
Thank you for this video! I took mine apart thinking it was a capacitor issue 99.9% of the videos suggest it, but I couldn't find anything wrong. I was almost going to order some parts to throw at it but I don't particularly appreciate doing that unless I am sure of the issue. Only cost me 7 dollars, because I could find a working splash drive thanks again. Also, big thanks to @wadupholms7503 for the tip on pressing the remote power button while plugging it in was the only way mine would boot into the firmware update.
@niftysbunker Жыл бұрын
can we do it without hisense remote? will this work if I directly use the power button on my TV?
@OscarsPlaces11 ай бұрын
Thank you I just fixed it. You are right I pressed the power button while plugging and wala now is working. Thank you for posting.
@sandrarios3246 Жыл бұрын
i have this exact model, followed the exact steps. difference is when i click on reboot, it immediately says "powering off". any idea of what i could be missing? thank you
@sandman4897 Жыл бұрын
thats happening to me too
@agazik49882 жыл бұрын
hi my dear friend are you pay any amount to the compeny to getting the firmware?
@s2000kpt Жыл бұрын
Sir, I have the same problem. Have talked to Hisense twice in the past month and each time I was told the usb firmware would be emailed to me and after 3 weeks of waiting nothing. Do you have the link still available with the usb firmware. I would like to have my TV working again.
@SOSfixElectronics Жыл бұрын
sorry i dont have the link, and you will need the firmware that matching your tv model number not any firmware will work
@largepoodle6036 Жыл бұрын
@@SOSfixElectronics dude no shiiiiiiiit. we are here on the video titled "70H6570g", you seriously could've just reuploaded the firmware. you're not that bright or useful at all, man. christ.
@electronicrepairservice20202 жыл бұрын
Thank you for walking us through the fix. I just got a septre x40 with screen that is all green. Replaced the main board but now the PS stopped outputting the 12v, put old main back in, same issue - it was working prior. I do have the 5v standby. I haven't started to troubleshoot the PS yet but was wondering based on your experience, what could b the issue to suddenly have this happen? Nothing is obvious and was wondering if a bad cap could be the culprit? I thought this was gonna b an easy repair 😂😂
@SOSfixElectronics2 жыл бұрын
so the tv turns on backlight on screen got green ? check to see if the mainboard sending 3.3v on Ps-on when you press the power button. you can add a resistor 1kohm between the 5v Standby and PS-on. then check the 12v and check the big cap on primary side of the power supply should get 390v if setup up circuit is working and may share more info about the tv to get us close to the issue
@electronicrepairservice20202 жыл бұрын
@@SOSfixElectronics ok, thanks, tv has (5) 5v outputs, one is labeled vsb and has 5v the others are 0v -ok to use that one to test? Do you place resistor first before trying to turn on? Cap is working properly.
@electronicrepairservice20202 жыл бұрын
@@SOSfixElectronics ok, just to update, did as suggested, no voltage @ 12v, & no 3.3v @ ps-on. 5V present @5vsb only. Voltage initially appears @ 12v when turned on but then drops. It did work, had checked the 12v output, was all good. TV sat for 3 days unenergized after waiting for replacement mainboard, put replacement in and no power up. Put old board back, did same. Weird. Replacement board from reputable vendor. Stumped. Customer had another shop work on it with no power issue, tech replaced a cap 2 years ago. Set is 10 years old maybe some other caps are dying? Thank you for offering to help me. I'm going to pass on this one and just replace the board - for $30 it's the cheaper option.🤓 Not worth making myself crazy 🤯 I'll troubleshoot it when I have the time to play around.
@SOSfixElectronics2 жыл бұрын
@@electronicrepairservice2020 try to disconnect the main board from power board, and do the jump resistor from standby to the ps-on, if the power supply working right you will get 12v and other voltages, if not unplug the tv with hotair gun warm up the output capacitors, then plug the tv with resistor jump. if you get 12v then you have a weak capacitors if not check the output diodes for open check the switching ic for the 12v transformer you will need a vcc and voltage start there
@electronicrepairservice20202 жыл бұрын
@@SOSfixElectronics ok, gotcha. Thank you very much for the instruction. Diodes ok, will do a cap check soon with heat, was on my checklist, set 10 years old & well used. This is a first for me, never had one die on the bench overnight & go from working to nothing while no power, idle. 😤
@samhasrouni2001 Жыл бұрын
Does this fix the flashing red light problem?
@SOSfixElectronics Жыл бұрын
not sure
@camilahorstcorrea69097 ай бұрын
Hello, I followed the steps, I see the flash drive flashing, but the update page doesn't start. It goes straight to the TV home page and reboots again. Please, any advice? Thank you!!
@SaulMod Жыл бұрын
Greetings brother, I need the software version 65H6570G, please help, I couldn't get it
@txhoustonm Жыл бұрын
I have the same model 70H6570G and need the firmware file. hisense says they cant send it. Can you help?
@alexiscavazos8034 Жыл бұрын
Could you help me with the firmware? I have the same problem and hisense tells me that they cannot send the signature due to problems in their system
@mariselrios606 Жыл бұрын
I NEED HELP WITH 70A6G
@Maddex9sQ Жыл бұрын
Can I get the link for the firmware update because I just contacted Hisense and they said their firmware is down!!?!?!
@wholio503 ай бұрын
Hisense support_ dowloads
@harlem1182 Жыл бұрын
This doesn't work I did everything he said and got nothing out of it, but if it did work I would've posted it on KZbin giving him credit, but it doesn't work
@SaultiBalldeip Жыл бұрын
2:58 MGS alert lol
@sandman4897 Жыл бұрын
i ordred a main board replacement and it wont let me factory reset why?
@wholio503 ай бұрын
Did u try on the screen, settings, reset?
@richymoreno2567 Жыл бұрын
Hey man I have the exact same model. Can you please help with firmware update? Thanks.
@stevey91765 Жыл бұрын
Hello, thanks for the great video. I have the same problem. Can I get the firmware ? Hisense is not helping at all. Thanks
@marco1008752 жыл бұрын
Serias tan amable de compartir ti firmware, ya q tengo el mismo modelo y me esta haciendo exactamente lo mismo, ya mande mi corroe a soporte pero no me responden.. Por favor.. Saludos
@wholio503 ай бұрын
Actualmente ya no se necesita enviar e mail. Encontrarse en el sitio de redes: Hisense support downloads.
@danieldieguez2057 Жыл бұрын
Me podría ayudar con el mismo firmware que utilizo no logro encontrar
@arturobarrera4019Ай бұрын
Hello Can you share the firmware its the same smartv like me please?
@allnews7839 Жыл бұрын
bro please how about some apps shows security error
@wholio503 ай бұрын
Mine started that way. Memory error due to the apps, I Uninstalled some, then reset it thru Settings, and it started shutting Off after several seconds. Then, I did this software update, and it made it worse. Now the tv won't even turn ON at all ...🙄
@pedrosimon8153 Жыл бұрын
Hello, im from Venezuela, i have the same problem. But the technical support dont send me the software for my coutry. if you have the posibility send me the software for 75h6570G for fix my tv I would appreciate it.
@Collasoul Жыл бұрын
Did you ever find this firmware?
@pedrosimon8153 Жыл бұрын
@@Collasoul No sir, this tv It's the biggest paperweight I have.
@castlesgrave5801 Жыл бұрын
There on the page
@castlesgrave5801 Жыл бұрын
Hello i did this with the correct software now it doesnt do anything at all
@SOSfixElectronics Жыл бұрын
redownload the firmware, use different formated flash drive. if that didnt help you may have wrong firmware. there is many software versions for same tv model, be very sure the software you have is for your tv .
@castlesgrave5801 Жыл бұрын
@@SOSfixElectronics correct firmware bad news it used to turn on now it doesnt even turn on
@SOSfixElectronics Жыл бұрын
@@castlesgrave5801 could bad eMMC, next option replace the board
@mrfreaknet3350Ай бұрын
if anyone had issues with the 55Q7G and managed to either get the firmware or access the factory reset menu, let me know... mine is not boot looping but just shuts down at OS booting (4 dots)... the only thing I did was a factory reset from within the TV and it just wont start again :/
@miguelbarrozo9491 Жыл бұрын
CAN YOU POST OR SEND THE UPDATE TO ME?
@kendragraciasenegaliafouda6 ай бұрын
JAI FAIT LA MISE A JOUR DU MICROLOGICIEL VIA USB GRACE A CET VIDEO (5) Hisense 70H6570G and all android TVs boot loop restarting Unbreak fix - KZbin MAIS LE PROCESSUS CEST BIEN TERMINER ET MA TELE NE SE RALLUME PAS ET LE VOYANT LUMINEUX ROUGE RESTE ALLUMER
@samanamiri2019 Жыл бұрын
Hi my friend Android TV HiSens updated from Android 9 B 11 when the installation process was finished resets on Lego Monde did not come up please Rahnmaym accurate model TV 43B6600pA fullhd
@highschoolbullieskennel1461 Жыл бұрын
Hey man can you please send me the firmware?
@wholio503 ай бұрын
😢 the tv totally shut Off after the software update completed, did Not went ON by itself, and now it won't power up at all. No red light, no nothing...