Sound Deadening Insulation in a Landrover Defender

[@Chaz_Overland]

Does this all come pre-cut then? When I bought ours for the our 110 you didn’t do that then and the black matting there was only enough for the top of the wheel arches and floor pan? Thanks.

[@johnantonine4505]

Whata the stiff used on rear floor please?

[@harryhino2267]

You mention using a heat gun to shape the floor covering. Can I do the same with your Mass Noise Liner?

[@carbuilders1]

Hi Harry. Yes, heat can be used to relax the vinyl. You can also use release cuts to great effect.

[@blazbohinc4964]

no soundsheck is it too much to ask?

[@carbuilders1]

Hi Blaz. Thanks again for your feedback. We do have some videos with end results (they commonly show around 5db on sealed-road driving and up to 13db on dirt or rutted roads). It is time consuming setting up a fair/standardized 'before' and 'after' driving test. It is difficult to do for all vehicle as these are customers cars and we have time restrictions on the install and videoing.

[@blazbohinc4964]

@@carbuilders1 Sorry for the trouble. I don't expect anyone to write back, so I might post the same comment on multiple videos. Well, in my experience, you just plop the mic in the truck, take a spin for a minute, then do the same afterwards. It's 15 minutes of extra time. If you can't manage that, then you've probably got full hands of work. At least you've got a good business going amidst these troublesome times. Not everyone can say the same. Take care