Sound like Marcus Miller using a Zoom B1 Four/B1X Four

[@dduck.210]

Can you do more about the Zoom G3Xn, I find your channel very useful with detailed instructions and testing of additional bass effects with the Zoom B1x Four

[@allforbass855]

Thank you for watching my videos, I will make many more videos with the Zoom B1X Four, I intend to make some videos comparing some effects with the Zoom G6 (which I also have), unfortunately I don't have the Zoom G3Xn, but much of what can be done on the B1X Four applies to B1 Four, G1 Four, G1X Four, G3Xn, G3n, G5n the way of operating these multi effects are very similar, whoever operates one of these operates them all.

[@samuelbreder]

O timbre ficou muito bom, parabéns! Preciso de um jazzbass kkkkkk

[@CadiBass]

Hi. please can we use the MG 100 bass guitar?

[@rema2846]

Hi..Awesome Work SIr!! Any particular reason why You would put the Effect AFTER the Amp and Cam sim?

[@allforbass855]

Thank you, each effect works as a kind of filter that manipulates frequencies, the position of these filters in the signal chain interferes with the way they act, for example an equalizer before a cabinet will manipulate the frequencies that will be filtered by the speakers, in an environment The virtual equalizer can be placed after the cabinet and in this case manipulates the frequencies resulting from the filter made by the speakers. Each effect interacts differently depending on its position in the signal chain. This allows for many different sound textures, what I presented in the video is the result of several tests with effects and different positions in the signal chain.

[@rema2846]

@@allforbass855 True Gentleman sir! Thank you very much.. love your Chanel

[@jytetka7366]

WAOUHHHH Thanks

[@estebansilvasilva3585]

COULD YOU UPLOAD SOMETHING FROM ARCTIC MONKEYS? PLEASE

[@allforbass855]

my bass is undergoing maintenance, but as soon as it's up and running again, I'll go back to recording and I'll upload something about Arctic Monkeys, I'll record it, but there are some requests that I need to attend to first.

[@debt9077]

Can you do a geezer butler tone next?

[@allforbass855]

I already have the Geezer Butler patch ready, I'm going to record Geddy Lee and then Geezer Butler, then Tim Commerford and a few more.

[@debt9077]

@@allforbass855 Looking forward for it 👍

[@pfbrodriguez]

very good!! can you make a geddy lee?

[@allforbass855]

yes, I already have the patch ready, I will record the video soon.

[@grooveironervoso7500]

E esse patch do Duff McKagan sai quando?

[@allforbass855]

Em breve.

[@daviddiaz00]

Hi, Where I can find the specs for that paychecks? Thanks

[@allforbass855]

The patch specifications are at the end of the video, in the print the patch chapter, the screen that appears is a print of the guitar lab program by zoom, on this screen it is possible to see the names of each simulated pedal and the settings of each parameter, just pause the video and copy, using the editor or directly on the pedalboard. Soon I will make a video explaining how to assemble patches. Thank you for your participation.

[@sowelldon]

The only problem I hear but is an easy fix Marcus's tone has a little more low end and low mids. Bro you almost got his tone nailed

[@allforbass855]

Maybe it's because of the headphone I use, it's a reference headphone with flat equalization, directly comparing the audios using my headphone it was identical, but each headphone or audio device has its own equalization, even if you use this patch on an amplifier it will change radically because the amplifier preamp will modify the frequencies, the cabinet also changes the frequencies, every cabinet is a frequency filter, the result also changes according to the instrument and even the cable used, the purpose of the video is to serve as guide, a base from which to arrive at Marcus Miller's timbre, making the necessary modifications according to each person's equipment.

[@wladimirsantos349]

Olá tudo bem quais pedais vc usou para conseguir esses timbres, eu tenho uma b1xfour. Ficou top demais

[@allforbass855]

No final do vídeo, em 3:57 minutos, tem a tela do programa da zoom pra computador, o guitar lab, os nomes dos pedais e os ajustes estão na tela, da pra copiar todos os ajustes usando só a pedaleira ou o programa.

[@wladimirsantos349]

@@allforbass855 obrigado

[@marcoaureliofeitosa7668]

amigo, sabe me dizer se esse patch de da B1 Four pode ser instalado na G1 Four via Zoom Guitarlab??

[@allforbass855]

Infelizmente não, alguns efeitos são parecidos mas tem algumas diferenças, a B1 e B1X tem os efeitos com frequências ajustadas para soar melhor no baixo que trabalha em frequências mais baixas

[@yayat_bass]

Billy Sheehan please

[@allforbass855]

This one is a little harder but I'll try.

[@yayat_bass]

@@allforbass855 thank you

[@josuesoto5340]

The guitar lab is not connecting to my pedal is there a step I'm missing

[@allforbass855]

Connecting the USB cable, the pedal should automatically turn on and connect to guitar lab, however, if the pedal is turning on but does not connect to the experienced software, put it in another USB port of your device, (my device has two USB ports but the pedal only connects to the software in one), check the usb cable, (try another cable or make sure the cable is working by trying it on another device), check the guitar lab software version if it is out of date update it, make sure the version is compatible with your operating system, take the opportunity to check the firmware version of the pedal. If none of that works, uninstall the software and reinstall it, checking compatibility with your operating system. If the problem persists, contact Zoom technical support. Hope this helps.

[@damelk]

be suere the USB cable is bi-directional

No squier classic vibe ficou um grave gigante, mas nos médios e agudos vou ajustar um pouco. De toda forma excelente trabalho que você fez

[@allforbass855]

Obrigado pelo feedback, tô gravando com um Eagle SJB 003, um jazz bass barato, fica mais abrangente, mas a ideia desses patches é justamente servir de base pra cada um fazer os ajustes pessoais de acordo com o próprio setup e gosto pessoal.

[@henriqueleite2783]

Mano faz um Oitavador bacana é um driveocteve rsrs pra nos mestre, desde já agradeço.

[@allforbass855]

Vou fazer sim, por partes, muita gente não consegue usar o oitavador, é um efeito que curto bastante, vou fazer um "tutorial" pra oitavador e misturar com drive e Fuzz pra simular synth.

[@disfurtar]

El sonido es parecido, falta la mano nomás que está flojilla. 😅

[@allforbass855]

🤷‍♂️

[@homerjackson141]

Aprende tocar depois grava

[@allforbass855]

Foi meio no improviso, o objetivo é mais mostrar o patch, o timbre e não técnica.

[@sebastiaofranciscoferreira5032]

Muito bom meu amigo, parabéns