I caught myself a Russell fish - White Rider #73

[@markmulvihill7354]

You can give Russell a fish and feed him for a day, but teach Russell to fish and he will leave a angry KZbin comment about how Doug didn't do it again, smh.

[@Submarine_SeXJ]

Mark Mulvihill Give a man a fish and feed him for a day. Give a man a pen and he’ll draw dicks everywhere.

[@charlesseara8502]

BUY A WHOLE NEW CONTROL ARM. THEY COME PACKED WITH BUSHINGS AND SHET

[@djhaloeight]

Charles Seara I’m saying!!

[@kylecollinsify]

yesssssssssss!

[@elmfranco5578]

[@masterfabricator]

El Doug completed a project in 1 episode the planets must of alighted perfectly lol

[@amunderdog]

Some strategically located sacrificial skid plating, May be a great preventative measure against costly chassis damage.

[@DiyAllaroundguy]

Ball Joints were a major issue for Ford at that time! Reconstruction of your entire front-end will be the solution. That or a flamethrower

[@wite1pwrSS]

Great job doug that's Turing out nice can't wait to see your enclosure finnished

[@frankthetankricard]

Car rides so smooth you don't even drive it. You dribble it. Jumps right over the potholes if you adjust your speed. Saves gas as well by reducing rolling friction. Could be a problem when turning and braking but you can always add a rudder and anchor to solve that part.

[@ronjlwhite8058]

Love the Bird Doug!!! Cant wait to see the soft top installed.

[@rogeraquaholicabreu2696]

That Bird is looking sweet those rims look like 20’s when riding low ! Great job Doug !!!

[@TommyBlazeHD]

I’m 2 minutes in. I think it could be pulling right because one of your brake houses are partially collapsed. I had that problem on my Ford Thunderturd back in the day. But then it would pull all the time. So, another issue I had was, bad ball joints. I had to replace both and have the new ones pressed in. Wasn’t cheap.

[@djhaloeight]

Definitely lower control arms and strut rod bushings. The lower ball joint is part of the lower control arm on TBirds/Cougars/Mark VIIIs. The lower arms are only like $40 bucks Doug put new ones on! and Your gonna need an alignment for sure when you’re done.

[@Kauffdrop]

I'm leaving a comment to let you know what I think about today's episode. Kick ass dude! Glad you got the brake issue fixed

[@TheBrokenLife]

Since I already have a feeling of what the future is going to bring... The tool you want for the inner tie rods is the Lisle set. Cheapest place to get it is Rock Auto. Also... New steering parts for ancient cars are generally pretty cheap. Like $20/item (although that ball joint looks pretty insanely complicated)...

[@kevinkeener3216]

Doug owns all of the last Thunderbirds around. Birds on birds.

[@PK-R]

Hydros are so badass. That t bird looks awsome driving on the streets.

[@THE-SLAUGHTERHOUSE.]

Great vid Doug and my lowrider pulls to the right when I hit the brakes and the tie rods not bent ball joints are fine I just live with it

[@ilfaraone91]

Jus bought the rear view hanger :) can't wait to get it. The editing is getting awesome,keep up!

[@quevicular]

doug, you can get the whole arm with the mounting bushings and ball joint for cheap off of amazon. Comes as one piece. Might as well do both sides. Then get a wheel alignment

[@joseHernandez-ig8ng]

Add copper plates to the areas where it slams down. It makes for a cool light show at nit💪🏽

[@joseHernandez-ig8ng]

At nigt

[@patrickfitzwater5511]

Would hate to pay for maintenance but watching hydros down the road sure do like cool

[@noahcook2019]

I absolutely love your videos and what you do! Keep up the good work!

[@OregonDonor87888]

Ohh fucking fuck man.. @soundmanca I haven't had a laugh this good in awhile. Love what you do! Been eyeballing your shit on forums and what not since 2007

[@workingclassperson2124]

If you do sell it get a 97 grand marquis in white more car more TRUNK space and its the sleekest year no badges and no chrome fenders. But anyway DB your the man always impressed by what you do. It does matter wha...

[@darrenroth6250]

The best part of waking up, is pooping watching Doug! In the Folgers jingle.

[@nopierce85]

Good video Doug. Just made my preorder on the bass dangler.

[@allrimmedout]

the ball joint on the end of your tie rod, is a tie rod end. just an fyi, tie rod ends wont come up as ball joints. and btw ball joints can fail and completely come apart. both on the knuckle and the tie rod can all completely come apart. that's why you dont fuck with used suspension joints, especially since other people on the road can be hurt or killed from it.

[@rawcarrillo2262]

Good to see someone doing some real work. Even when it's been raining and wet outside. A what's up to the guys on frame 14:13

[@williamoleary4108]

Russell Fish = Panty Shrimp

[@tyshantz8675]

Tbird looks good rolling down the road

[@philthy.basement]

4:05 DAMNIT DOUG, STOP DICKIN’ AROUND! We got sh!t todo 🤦‍♂️ Jesus Christ 😖

[@charlesseara8502]

DOUG -- WHERE DEM SKID PLATES MENG

[@peterclark4175]

Titanium skid plates

[@marcohuertas692]

If it doesn't pull to the right when driving then shouldn't be the tire rod if it pull to the right when you brake the left brake caliper is not working properly. When a car pull a certain way when you brake it's normally the opposite way. So if it pulls to the right it the left caliper if it pulls to the left it's the right caliper. Good luck 👍

[@gettinthrewlife76]

I'll give you.......🤔I'm compliment on your hard work in these silly fun vids. ✌️out from Modesto 👈😎👉

[@DrummerBoii1411]

You may as well get some polyurethane bushings instead of Rubber bushings. They’re stronger and last longer. But you probably already thought of that 😂

[@ryananderson8974]

Hands down best KZbinr ever!

[@madsenovxanavi5259]

Doug is my favorite youtube stoner! Got a hat for christmas and a shirt!

[@ali19186]

Just ordered my review mirror hanger!!!😎

[@Jeffdaggs69]

Start passing out that free shit Doug 👏🏻👏🏻👍🏻🤷🏼‍♂️🤘🏻🤘🏻

[@Brian_in_Vegas]

Todays vlog was filled with the funnys 🤣🤣

[@RobertD_83]

Spends 3 hours pulling trashed 20 year old ball joints to reuse in order to save $7 🤦‍♂️🤯

[@luketaylor2597]

Hey Doug your headliner looks like the old lady tried to scratch her way out might want to check your door locks while your at it

[@billruss575]

I heard Origin....nice Doug!

[@joevanbeneden]

Those lower control arms are less than $100 for the pair on rockauto. I rebuilt an entire 97 front end for like $300. Just get Rafa to buy another kit and pay for all the products and material he uses when hes over.

[@MrMatt0184]

No rusty bolts makes it a lot easier. Do the same swap on a salty winter car and both hands would be bleeding lol

[@screwstontx480]

Matt H 😂😂😂

[@MrBrewner]

WHAT?! Your going to do car audio on a car audio channel next time? That's fucking madness!

[@rafatrill]

Using chrome sockets with a impact u savage Doug

[@AadamTheBomb]

lol reuses old ass 10$ tie rod end..... damn glad i didn't post yet then reuses a 10$ ball joint. damn lol thought i had seen it all

[@treynathaniel4075]

them joints dont cost much more than that new

[@ghost-4230]

He already had that other car. Might as well have taken the rest off there. It doesn’t really matter

[@WeldersOnly]

I got federal-mogul ball joints for 4.50 a piece uppers and lowers, and tie rods for a little more on rock auto for my Ram... pep boys wanted like 45 a piece for the exact ball joints

[@billybro1999]

ball joints are about $20-$25 each. unless you buy moog ones.

[@russellfrancisjr.2407]

Doug does it nice because he does it twice (more like 10x)!

[@johncockonmyhand2920]

That's right Russell Francis Jr.

[@MyHairyChin]

Great build, wrong car!

[@bob808]

D Level to keep the T level... I dig it :D

[@alanhall8320]

It's never to low Doug

[@sasenarayan]

Maybe its time to call Pedro from O'Riellys

[@ChrisProvazek]

Good job bro, keep up the progress!

[@kurupt8308]

Damn that bushing on the ball joint was blown out like Rafa’s mom

[@BS.Wickman]

I want to see more of that silver Corolla with bad window tint and less doug

[@metalrott324]

How many parts did you replace including new wheels and tires, and still didn't get an Alignment done? Meh, keep doing you bro. It's hilarious 😆

[@thedarkgreenvanman]

Good for you Doug

[@peterthomson6161]

Correction Russell is a pole smoker. Russell is the tube steak goblin.

[@MrEdgar3216]

Im sure Pedro at O’Reilly would have given you a sweet deal on master pro ball joint lol

[@TheDeadwood11]

the bolt's holding the rack and pinion needs to be tightened, you can see the rack moving when you turn the wheel.. …

[@1Qikthot]

Our hero Doug F. Benard the F stands for Fitswell cuz you managed to swap out those balls live and directly infront of the Millions here and around the world! Let's get, ready to Pancake! Lol hey My guy good vid Stay Eazy

[@nath_tayl0rr]

Was you that low in the original lowlow t bird? Plus will you get titanium scraper pads so you get white sparks when you drag ass

[@travissmith2067]

Any thoughts of getting some titanium plate so when you're dragging frame you can get some sweet ass spark action.

[@TheQuadfather1976]

Damnit the Bird is looking delicious Doug!

[@TheRealRickSanchez01]

I remember when the videos were just uploaded.

[@nakulah]

Boo hoo

[@psementalist]

Hummmm 12:30 am right now I've only got until 9:00 until Doug starts working on the T-Bird and talking 💩 about Russell the love muscle .....bwahaha

[@peterclark4175]

Just ordered my soundman bass hanger.... I wonder what freebies come with.....

[@mikeguajardo7689]

same here

[@Copperheadzy]

Best show on KZbin

[@bobbybentley8136]

Nice headliner

[@feARless556]

Next episode, install drag blocks!

[@Submarine_SeXJ]

“Ball joint at the end of the tie rod” It’s called a tie rod end for a reason Doug

[@brutisking]

Looks clean!!👍👍

[@azstarz100]

weld some titanium plates to the frame so it throws sparks when you slam it whilst driving

[@HUBBABUBBADOOPYDOOP]

Cat heat shields appear to be scraping. In CA CARB cats are big money. Maybe try to lift them?

[@kcezone]

Hay does the charger in the t bird need to be inside I’m building a mini truck the battery will be under the bed love your feedback thank you

[@philipdigregorio8237]

Love the bird Doug

[@markus-schartner]

pls stop this t bird thing, more audio 👍👍👍😉

[@oldcaraddiction7042]

Don't delay....upgrade the ball joints now. A broken one can kill you and worse....it will damage the car. 😎

[@sjgoff]

Sounds good, I'll take it for the price of a brand new Nissan Versa. $12,815. After the stereo is done of course. When can I pick her up?

[@basswalker6566]

From my experience with those thunderbirds. Just spend the money and replace those ball joints. Next thing you know you are making a turn then snap. Do not go to O'Reillys master craft is trash.

[@cookiecrew3629]

....money must be short if the t-bird dont roll on 13" wirewheels.....we might would see you on crenshaw or broadway on a sunday funday....🤭

[@susanpennock4195]

Doug dude, I cant bitch at ya, the car looks good, silly as hell, but looks good.

[@firstnamelastnameisallowed7943]

The bird is looking fly man! Give the mule some love to so it won't run like the other bird does. What's with all the animal names anyway? Trying to tell us something...

[@LeakBros]

All that talk....your box is not even done yet.

[@jessebecerra287]

Hey doug, what kind of safety glasses or those?

[@so.mo.inbred2194]

nice ride!

[@JuanOrtiz2007]

I hammered my finger at work once. Split open the side of my finger.

[@strassafrass1]

It doesn't matter what you did, Doug.

[@ecidemon5672]

yeesh add some heat

[@toolfreek555]

Carl Cox or Joey beltram???awwww huuu

[@michaelsegarra2709]

$4 new ball joint man I can't believe you didn't called Pedro from O'Reilly's

[@paasosentomi]

Want your gears grinded? Check those tints @ 18.59

[@legendsofcaraudiobradnewso8424]

That video was way to fast! I feel like you are digitally making the video shorter. 🤣🤣🤣. Have a great one bro

[@jeremycayton2256]

Can’t wait for the new episode and see wtf did Russell do 😂😂😂

[@RobertL78]

What’s the drum and bass song playing while he’s beating on the ball joints?

[@Freejason33]

Uh oh, that looks like some damage.

[@Pilot_the_Dune]

Shoooo......just in time for the greatness.

[@thedukeofarchibauld]

16:36 prove it. Guess Rafa will have to be your passenger

[@7daytheory110]

First. And it looks like your holding Russell’s bag, something I can’t unsee. FML