Presonus FireWire Trick.mov

Connecting a Presonus StudioLive 24.4.2 to a MacBook Pro via Firewire. A couple of tricks to keep in mind to make sure the two can talk to each other

[@smarsack]

Thanks Reverend!!! I have been trying to figure this out on my own and ran across your video. I appreciate it! Just to add...if you're running two boards cascaded, you have to do the same to the other Studio Live board. Works great though! Thanks Again!! Pastor Shawn

[@DMichaelReese1953]

I have an HP laptop and got the 24.4.2 to hook to. The cable U have is a 400-6P to 800-9P. The 400 connects to mixer but the 800 does not on the computer. Is there an adapter for one of these slots on laptop? Help please. Thx.

[@luisrangel3296]

How do you up date? My Presonus 16.4.2 does not have the monitor effects send page??

[@hogforJesus]

Wow! I have been having trouble at my church getting the audio device switched to firewire on capture. Will this fix it? Also, will this reset your board?

[@gasgoonthebeat5590]

when i go to page 3 on system it says devices: no connected devices. but i connect the firewire cable to the mixer and my computer?? someone please help.

[@SoundProLiveNetworkVideos]

Most laptops offer an option for a 7200 RPM drive. Get it if you can. Rule of thumb for audio and video is that faster hard drives are better.

[@hassannassereddine6021]

Can u please help me to figure out how to conect my presonus 16.0.2 to the mac book

[@HatredPrime]

Thanks Michael J Fox.

[@Casper10M]

is it the the same for the 16.0.2 cause mine keeps changing status from no driver 48khz to driver on firewire

[@drahill1907]

where is the id card slot on the presonus 24.4.2 using firewire 800.-400?

[@joseph-ow1hf]

Sir, just found you via search. I bought a used SL 16.0.2 with FW 400. I have a FW 400-800 cable to plug into older Mac w/ 800. When I go to system on the board it shows sampling rate of 44.1 kHz and status: no driver. There is no firewire option to change. Can you help?? Thanks so much

[@ajlogan5525]

Good Day, do y'all know how i can presonus studio live 24.4.2 not the AI version the old one, is there another trick toconnect it, if the firewire cable is not working?

[@GearheadModding]

man i could REALLY use your help, My PreSonus is connecting to my pc and im able to use it with capture, studio one, etc. BUT im trying to use that audio for Wirecast (Live Streaming) Windows is not recognising sound coming from the firewire. am i missing a driver or something?

[@donsmith7979]

Matthew Brunk Hi,I have just a question for you and not an answer.2424AI mixer /PC .Studio one 3 Pro.I want to use just pro 3 Daw but mine just doesn't want to Work for me.I keep hearing all about Capture.I Don't want to use Capture.Can I record from 2424AI into studio one 3 direct?Thanks Greg

[@johnnyjclark]

Select Aux 1& 2 in the input tab of WDM in Universal Control and Wirecast with get audio

[@bmanofrocketleague522]

Not all heroes wear capes. Well idunno you may be ...but...thanks for your help!!

[@bottymanrique]

Thank you!!

[@italkart192]

You are like Jesus came down to Earth. Thanks a lot, it helps a lot

[@lawlothegradiator7723]

BK Studio Live you😂😂😂😂😂

[@imzaazmi]

Hi sir.. Is it possible the firewire cable from presonus cable connect to my laptop with USB (my laptop got no firewire port).. Thanks

[@stevenesparza7666]

I’m having a problem with mine. My presonus only has fire wire. And my computer can’t read it.

[@brad_neal]

I have a new 2014 iMac - no firewire port at all. Only adapter I can find is a thunderbolt to FW 800. Any ideas?

[@volkereinsfeld5970]

+Brad Neal FW 400 to 800 adapter going into your FW 800 -> thunderbolt adapter, this is what I use.

[@brad_neal]

Thanks. That's what I did and it's now working fine.

[@SoundProLiveNetworkVideos]

Ahhh. Didn't think of that. I would contact Presonus direct. They are really good about helping solve problems. I'll send them a link to this thread as well.

[@Bendecida716]

hi my presonus 24.4.2 ai. pg 8 system link id says. either master or slave ...hoy did you change it to zero

[@clettisklump]

great video, but I'm still confused. what Im looking to do is set up my board to my computer and I'm having fits. Help please sir...

[@daniurbinamusica]

Hi sr, i've a studioLive 16.0.2 and i've connection problem with it, i download the last driver and Universal Control for High Sierra (Mac) , then I saw you video and try to do the same but in the page #3 looks different to yours, in my just appear to change Sampling Rate and no more and below just say "Status: No Driver -" what can I do? you can help me with this problem please? i'll appreciated

[@josecorneliobrindiscobriimusic]

¿Did you can solved it?

[@daniurbinamusica]

@@josecorneliobrindiscobriimusic yes bro, with a thunderbold adapter

[@josecorneliobrindiscobriimusic]

@@daniurbinamusica ¿Can u paste me the link of the adapter?

[@josecorneliobrindiscobriimusic]

@@daniurbinamusica Amigo, ¿Me podrías ayudar? Te paso mi correo. Ya compré dos adaptadores y sigo sin poder sincronizarla con mi Mac.

[@iluen]

What kind of harddrive do you use? There homepage says that you need 7200 RPM, but standard for laptops is 5400 rpm. So what kind of RPM do you have on your hard drive? And if you have 5400 does it affect much?

[@user-vf7bl4uy2c]

Not much.but you can change it with your hands.

[@tarugohg]

I have problem freezing GR, how do I solve?

[@user-vf7bl4uy2c]

Can you sen it to me (Russian Federation) for reoair?

[@imzaazmi]

I give up.. With this 16.4.2.. 🥺

[@Azzlad]

I've just noticed another pastor having trouble with the same issue in the comments, is there a pattern emerging here?

[@eventservices2868]

My AI mixer does not have an option to change the FireWire link ID. Can anyone tell me what to do?

[@waynestrain]

Open up the system tab on the StudioLive, navigate to page three. There it is.

[@coolblues14]

Wayne Phillips on page 3 just gives sampling rate and says status no driver... an older 16.0.2

[@Finnmarkhimself]

Shakin' Stevens!

[@eggbertvonegg]

What is said about the cable in this video is not accurate. That connector that is on the Mac side of the wire is called a 9 pin and on the Presonus side its a 6 pin but your cable is still probably either a 400 or a 800 cable. Unless it converts from 800 to 400 but I'm pretty sure you need some kind of adapter for that.

[@waynestrain]

You can use the FW 400 to FW 800 cable with no adapter. It will only run at FW400 speeds though.

[@SoundProLiveNetworkVideos]

The software is all the same. Just the I/O is different. So the trick should work on the 16.0.2 as well. Good luck.

[@Casper10M]

it doesn't bc the 16.0.2 doesn't have addressing

[@SoundProLiveNetworkVideos]

I never read the manual unless i run into a problem. You know, same as 80% of users. And when we did this two years ago, it was not in the manual. At least i could not find it. I looked. And on your like jab about "pastors"... I am not one. It's a nick name. But a TON of these mixers are sold into the church market...

[@sixsentsoldiers]

New board. Oh shit. Gotta buy a new computer. This is a pain.

[@Azzlad]

It tells you this in the manual, it's a good idea to read it before trying random fixes. It's not a trick, it's a software function that you didn't know existed because you didn't bother to read the manual.