I drywalled a house with that double layer sound dampening drywall. That stuff really works. You could barely hear someone around the corner. And could not hear someone in a different room.
@soundproofguide2 жыл бұрын
Awesome!! Thanks for the feedback!
@Nocholas Жыл бұрын
An excellent alternative is butyl acrylic caulk. You don't need to spread it all over, but that's fine. The main areas you want to apply any of this stuff is near (or directly on) any studs; that is where most sound transmission occurs. Essentially what you are aiming to achieve is a mass-spring-mass system; one mass being the building, the other mass is the drywall, and the caulk is the spring. When you walk down the caulking aisle, there is really only 3 or 4 different products there with many slight variations such as color, curability and durability.
@WesBos2 жыл бұрын
This video both full of great info and an excellent example of vibration noise 😆
@soundproofyourstudio Жыл бұрын
I have to disagree with this video. You don't want to trowel on Green Glue. The directions specifically say not to do this. Where are the verified lab tests for Carpet Glue? I hate to say this, but so many people come to me saying they are using carpet glue to soundproof without any scientific proof that it works. Show me the lab tests and I will believe it too.
@bryede2 жыл бұрын
It seems to me that you'd get better sound loss by not spreading the glue across the surface. Having thin air pockets in multiple regions of the drywall would be areas where the vibrations wouldn't couple well to the next board. Green glue is probably soft enough that you need a lot of it for strength, but maybe with carpet glue you could get away with less.
@soundproofguide2 жыл бұрын
Great point. I would think the green glue itself would dissipate the vibrations rather than the air pocket. To have an effective air void to treat low frequency noise would be an air void that is completely disconnected from the joist, like Resilient Channel "RC". If the drywall screws goes through the RC and into the joist, low frequency noise will come through because you've reconnected the wall to the joist, it has to be decoupled to be effective. Great question, thanks!
@dylan-nguyen Жыл бұрын
@@soundproofguide the official instructions for Green Glue say you need to make a random pattern btw I’m assuming for the air pockets as well Their marketing basically says the Green Glue transfers the sound horizontally and prob the small air pockets are what keeps it from continuing to transfer across the drywall Basically if you applied it evenly you would couple the drywall together completely 🤔
@spanishmossmusic3262 Жыл бұрын
@@soundproofguide If I understand right, 'low frequencies' are going through drywall into the noise, regardless of whether the RSIC cops and RC screw is incorrectly hitting the joist. I"m going to use IsoMax with RC and two layers of 5/8? gypsum. I am assuming that Green Glue is NOT worth the extra expense since I am investing in better options. Do you agree? Thanks for the vid!
@BigMTBrain Жыл бұрын
@@dylan-nguyen (UPDATED! In further thought, the air pockets make all the difference!) Without actual experience, gleaning from what I've read, the sparse, random application serves mainly as a shock absorber for, I suppose, low-frequency soundwaves. The Green Glue manufacturer terms the quality "viscoelastic damping" In that sense, the air pockets serve no purpose. UPDATE! HAHA! That last sentence is completely wrong. On further thought... he sparse application is just to assure the two boards have no place of direct contact. And if you were to spread the same amount evenly, as @Soundproof Guide suggests, that could be a problem because you'd be greatly thinning and diminishing the viscoelastic damping quality, UPDATE! AND to essentially create flexible bubbles out of the air pockets. If that's true, then the same would apply to the suggested alternative -- indoor carpet glue. HOWEVER, a problem with indoor carpet glue -- unlike Green Glue, which has been tested and proven to never (or extremely slowly) cure to solid, and thus maintain its viscoelasticity over the long-term -- is that its doubtful that indoor carpet glue has been considered or tested for its sound isolation or long-term viscoelastic qualities. I personally, therefore, would not experiment with indoor carpet glue as an alternative -- its long-term viscoelasticity (its sound dampening ability) is neither tested or guaranteed, and over time, you could just wind up with a thicker wall -- no sound dampening in between. Given these non-expert ASSUMPTIONS, UPDATE! I WAS going to use a sparsely placed rubber gasket material as a much cheaper alternative to Green Glue. However, given the new insight that sparsely spread Green Glue actually produces shock absorbing air pockets, I'll be going with Green Glue. This is for a sound isolation booth, so to assure no leakage out of the sides of the joined panels, I'll tape the full thickness of the sides as well. Doing this will hopefully also serve as a sound dampening agent when walls are joined at the booth corners, top and bottom.
@BigMTBrain Жыл бұрын
For anyone reading, I updated my original comment in this thread where I indicated the air pockets created by Green Glue serve no purpose. In fact, they ARE the purpose. Along with the viscoelasticity of Green Glue, the air pockets form flexible bubbles that can expand and contract as necessary to effectively shock-absorb sound vibration. Given that air pockets are a primary and necessary component to the effect of Green Glue, spreading Green Glue evenly is a HUGE mistake. It truly is the tested viscoelastic quality of Green Glue that makes it a special kind of sound absorber. Sure the formulation is probably quite simple and the product, therefore, shouldn't be so damned expensive -- just some kind of agent that allows the glue to only dry to a certain elastic consistency -- but that's inventiveness, entrepreneurship, marketing, and capitalism for ya... take advantage when you can. Just asked ChatGPT if Green Glue was patented: "Yes, Green Glue is patented. It was invented and patented by the company Saint-Gobain Performance Plastics in the early 2000s as a way to improve soundproofing in buildings. The patent number is US 6,387,808, and it covers the specific formula and use of the compound as a sound damping material." Pfff... The poor man's formula: the perfect ratio of mineral oil to indoor carpet glue that doesn't lose the gluificationalistic ™quality yet gives that magical viscoelastic quality, mixed EXTREMELY well... VOILA! Beige Glue. 😁
@nicholasdambrosio35912 жыл бұрын
Why didn’t you compare the Roberts 3095?
@stevedemetrious64545 ай бұрын
How many drywall sheets does a gallon cover?
@SnowAngelfish8 ай бұрын
Have to slightly disagree,,, its not the sheetrock. Sure the sheetrock manages noise at mid and high freqs but does nothing for the lows. Thats where the green glue does its job in combination with the sheetrock. Oh,, dont trowel it! Just squirt it all over.
@alirezayousefirad Жыл бұрын
Hi, if the goal of using green glue sandwichd between drywalls is dampening then can't we use rubber, cloth,carpet any many other dampening materials between drywalls and get the same result I feel there is advertising tatctics of this company that makes green glue popular,am I right?
@ubacow7109 Жыл бұрын
I think one of the most confusing things I see from consumers is people confusing Green Glue Adhesive vs Green Glue Sealant (as well as other acoustic sealants), and then keep wondering why it doesn't work.
@FlankinspanK2 жыл бұрын
Wonder if theres a way to “dilute” the carpet glue so that its less tacky amd more gummy like green glue
@RonnSono-MassaAcoustics2 жыл бұрын
Green glue does not reduce sound transmission. It reduces resonances and dissipates energy by a concept called 'constrained layer damping'.
@GregoryGuay Жыл бұрын
What do you think, there’s cheaper carpet adhesive? Is a comparable alternative?
@RonnSono-MassaAcoustics Жыл бұрын
@@GregoryGuay Any adhesive that has viscoelastic properties when cured basically works. We mostly use a contact adhesive based on neoprene, not brand specific. The stress/strain phase shift does all the heavy lifting.
@smellypunks Жыл бұрын
There is a black product that is used for drainpipes and roofs to stop leaks which does not go hard. It costs $4 per tube. I wonder if that could be used?
@northernpatriotmanchester675 Жыл бұрын
I design and build recording studios and can assure you it works !
@alex-lu8mi2 ай бұрын
How about silikon?
@Carguylogan Жыл бұрын
Hey boss, you seem like the perfect guy to ask about my situation. I'm trying to sound proof a 10x12' apartment bedroom for a drum set. To keep the noise inside the room. There are no other apartments on 3 sides of mine, and the fourth side is across the whole apartment, so the main concern is the apartment underneath mine. The bedroom has carpet, and I was going to put down 1/2" foam board, then 5/8" MDF and then a thin carpet on the entire floor of the room, and the drum kit will have another rug underneath it. Is a layer of MLV also needed on the floor or is what I have good enough? On the walls I was just gonna hang 1/2 lb MLV and then use 1/2" fiber sound board with R13 glued on to cover the windows and the door to the room. Will this be enough to block most of the drum noise from going thru the walls and floor to the ppl below me?
@GregoryGuay Жыл бұрын
How about Grip-Rite® Acoustical & Sound adhesive?
@gabrielshannon19012 жыл бұрын
Try roberts 3095 I think it stays more pliable then 6700
@donlyjuan Жыл бұрын
which do you think is better for Soundproofing? Taking durability into account
@GregoryGuay Жыл бұрын
I don’t see any specifications for playability… Do you know this from personal experience?
@jorgenieves5582 жыл бұрын
Thank for your advice It great when you lookout for the consumer!!!!!
@soundproofguide2 жыл бұрын
Thanks for the feedback! :)
@kashmirha2 жыл бұрын
Great tip, its a pitty that these products are pretty local, in Europe there are so many brands...
@cloel22982 жыл бұрын
Isn't it also about decoupling?
@simeonhendrix10 ай бұрын
Thank you!
@johnknightiii13512 жыл бұрын
What about using something like hydroban liquid membrane instead? It comes in 5 gal and seems to be a better bang for the buck
@soundproofguide2 жыл бұрын
That might also work! I’d have to look into it. You can also buy the 4 gallons of the stuff I used in this video for around 40-50 bucks.
@wotek84 Жыл бұрын
How about silicone?
@ZOMBie64Ай бұрын
Silicone cures to a harder consistency. If you found silicone that cured to a softer rubber like consistency it could work. here is the issue, it is EXPENSIVE. I am going to use a 4 gallon pail of Roberts 3095 carpet glue, it stays pliable never dries hard and 4 gallons of it is something like 60 bucks. Same amount of silicone would be many hundreds of $$.
@EKBBQ2358 Жыл бұрын
Any thoughts on if the Henry 237 Acoustical Tile Adhesive would work as well? Do you know if the Roberts other carpet adhesive would work, like the 2057 or the 7250 which is a cork underlayment adhesive that promotes itself as a very tacky adhesive.
@ballewdustin Жыл бұрын
Would the indoor-outdoor carpet adhesive work effectively in place of Green Glue SEALANT, or is there another (or better) alternative to the sealant? I'm very new to all of this and am curious on my options when caulking the perimeter seams when installing MLV.
@toomanymarys73555 ай бұрын
Absolutely not.
@desmonddavis11052 жыл бұрын
Any thoughts on applying the indoor outdoor carpenters glue to MLV to existing drywall with staples and then a layer of 5/8 drywall atop the MLV using drywall screws? Oh and I guess another layer of carpenters glue on top of MLV before 5/8 drywall and screws too?? Thanks!
@soundproofguide2 жыл бұрын
That would definitely help make the wall more soundproof!
@zechariahhambone38412 жыл бұрын
I'm certainly no expert in this, but as others I'm looking into an alternative to the green glue. I may just do the double 5/8 drywall and leave it at that. But I do wonder about other products as well. My mind has thought of some sort of rubber strips, tape rolled so it sticks to itself, rigid foam board strips, and drywall strips
@spanishmossmusic3262 Жыл бұрын
WHAT DID YOU DECIDE TO DO? THERE'S NOT A LOT TO BE DONE BETWEEN 5/8" OF GYPSUM LAYERS THAT WILL MAKE A HUGE DIFFERENCE IN 'LOW' FREQUENCIES....STILL WORTH A TRY IF THE PRICE IS RIGHT!
@brassic17682 жыл бұрын
Hi. I want to be able to talk (at normal volume) without people in other rooms hearing. What would you advise? I am considering making a small 3x3x3 foot cube out of cardboard (sufficient for me to sit in), and covering the inside with acoustic foam. I can also add household blankets over my box. What do you think? Also from what I heard the foam needs to be absorbing, right?
@soundproofguide2 жыл бұрын
Great question. Usually to have an effective way to soundproof high frequency noise (Your Voice) would be to add mass. Cardboard and sound deadening material wouldn't be effective BUT in your case it just might be since you're just going to be. You wouldn't be completely getting rid of the sound of your voice but you sure would be muffling the sound which just might work. One thing you could add to actually create mass within that box is a product called Mass Loaded Vinyl "MLV" which would work better at blocking the sound pf your voice rather than just deaden it. Here's a link to MLV from Amazon - amzn.to/3iQ4Grh That link will give you 16 sq feet of MLV. Hope this helps!
@brassic17682 жыл бұрын
@@soundproofguide Hi. Thanks for your reply mate. I found a different one for the UK. 2mm thick, 5kg/m2 It says it has an "insulation value of 24 dB" "when the soundproofing mat is hung a curtain". Does that mean it would block more sound as a box? Do you think 2 layers (insulation value of 29 dB) is sufficient to virtually block my voice completely? One last question. If I put 2 layers, is it best to put one layer outside the cardboard box? Or both inside?
@cb79632 жыл бұрын
Thanks for this. I was getting ready to spring for the GG, but now I will do this instead. Question: is it important when putting up the second layer of drywall to make sure the seams are staggered vs the first layer? And I should definitely use 5/8" for the second layer, correct? Thank you.
@soundproofguide2 жыл бұрын
You don’t need to stagger them if you use green glue. Make it easier on yourself. And yes, 5/8” drywall is the way to go!
@cb79632 жыл бұрын
A followup question please. So are you saying a layer of regular 5/9" drywall with the carpet glue applied would give a similar result to using the soundproofing drywall product? Thanks
@spanishmossmusic3262 Жыл бұрын
@@cb7963 I don't think Green Glue should be called a 'SoundProofing' product. It 'dampens' if I understand correctly. It adds a small improvement to a well thought out system. Like 5% better? 10? How did your build work out? I"ll start my drywall in a couple months. Two layers of 5/8" gypsum on IsoMax clips and RC. I don't think it's worth the extra time and effort because the green glue or similar damper will not likely help with the lowest frequencies anyway.
@esuus2 жыл бұрын
Awesome!! Thanks! I can't find this product where I live, though. What would you look for in a glue to find something that resembles the indoor/outdoor carpet glue (besides elasticity, but that's not even advertised on the Robert's glue packaging/amazon page). e.g. ingredients, use cases other than carpet etc
@gabrielshannon19012 жыл бұрын
Can you find 3095 it is very Similar.
@barrymarson9658 Жыл бұрын
I would suggest installing Sonopan then resilient channel, then quiet rock, in/outdoor carper glue then greenboard 5/8 thick.
@michal58692 жыл бұрын
did you test foam or common cheap floor underlay?
@toomanymarys73555 ай бұрын
Foam does nothing for STC.
@111ryryalex1112 жыл бұрын
Thabk you for the video. J'ai dla misère a savoir si tu cache bien ton accent quebecois ou si tu les pas.. mais merci quand meme
@soundproofguide2 жыл бұрын
Ah you’re welcome! Je ne suis pas du Québec mais tout près! Et oui, il y a un accent là! 😊
@jaggerexe1705 Жыл бұрын
Moi, j'ai aussi pensé la même chose...p-t un acadien ou d'Ottawa. J'adore l'accent en tout cas.
@80RedRock Жыл бұрын
If you follow his advice and spread the green glue evenly, you just destroyed the entire effects of it.The point is the air gaps absorbing soundtransmission between the glue. That's just bad advice. That's some pretty costly poor advice to put in your video. You really should first understand how everything works before you discuss it.
@soundproofguide Жыл бұрын
If you’ve ever used “Green Glue”, you’d know that it makes no difference. Give it a try.
@80RedRock Жыл бұрын
@Soundproof Guide I do use it. That's how I know you're wrong. If you spread it evenly, you'll reduce the gap between the panels, allowing for more sound transmission. Also (especially when using something like Quietrock), the gaps in the glue allow the soundwaves to bounce between the streams of glue, allowing them to dissipate.
@elonmusk8667 Жыл бұрын
Spend the money for Green Glue it really works well.